autotelic.build(720) 287-7958

DESIGN · BUILD · AUTOMATE

LAKEWOOD SERVICES

Pop-Top Addition in Lakewood

Licensed pop-top addition services for Lakewood and Jefferson County. Go up, not out — add a full second story.

  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Pop-Top Addition

Go up, not out — add a full second story

FREE PLANNING TOOLS

Both tools are free and take a couple of minutes — start in either one.

Local Service

Pop-Top Addition Services in Lakewood, Colorado

Autotelic provides professional pop-top addition services throughout Lakewood and the surrounding Jefferson County area. Pop-top second-story additions across the Denver metro — add bedrooms, bathrooms, and living space without expanding your footprint. Structural engineering included. Whether you're in Lakewood (Jefferson County's largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.

Permits & Licensing

Permits in Lakewood

Lakewood building and construction permits are issued through the Public Works Department, and contractors must be registered with the city and hold a Lakewood contractor account before pulling permits. Permitting and inspections run through the city's eTRAKiT online system. Authority: City of Lakewood — Public Works Department (Building and Construction Permits).

Permit Thresholds

Lakewood permit thresholds

Code reference
Permits are generally required for residential remodel work in Lakewood, Colorado, unless the work falls under specific exemptions listed in the city’s adopted Building Code (referenced as § 105.2 in secondary sources and detailed in the official exemptions list). There are no broad valuation th§ 105.2
Code reference
One-story detached accessory buildings (tool/storage sheds, pergolas, playhouses, etc.) ≤ 120 sq ft (commercial) or ≤ 200 sq ft (residential), with additional placement rules.
Code reference
Moveable cases, cabinets, counters, and partitions ≤ 5’9” high.
Code reference
Retaining walls ≤ 30 inches high (unless supporting surcharge or impounding flammables).
Code reference
Private walks/driveways ≤ 30 inches above grade (not over basement/story below, not part of accessible route).
Code reference
Prefabricated non-heated swimming pools < 24 inches deep without circulation system.
Code reference
Window awnings on Group R-3 occupancies projecting ≤ 54” from exterior wall.
Code reference
Roof covering repairs < 100 sq ft (unless removing mechanical/electrical equipment).

Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).

Energy Code

Lakewood energy code quick facts

Code reference
2021 IECC (with Colorado Model Electric Ready and Solar Ready Code amendments required by state law HB22-1362; Lakewood has also adopted solar-ready provisions via Appendix RB).
Code reference
Lakewood’s adopted codes document explicitly lists the 2021 International Energy Conservation Code (no major local energy-specific amendments noted beyond state-mandated additions).
Code reference
Climate zone is 5 (5B for the Denver-metro area).
Code reference
Key prescriptive requirements (from 2021 IECC Table R402.1.2 and related sections for Climate Zone 5, applicable to new construction, additions, and alterations/remodels where triggered; existing buildings and additions must comply with envelope and other provisions unless exempted):
Ceiling/attic insulation
R-60 (or equivalent U-factor).
Adopting reference
2021 IECC Table R402.1.2 (R402.1 prescriptive requirements).
Wood-frame wall insulation
R-20 + R-5ci or R-13 + R-10ci (or equivalent U-factor).
Adopting reference
2021 IECC Table R402.1.2.

Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).

Zoning & Dimensional Standards

Setback & dimensional standards in Lakewood

Zone-district dimensional standards for Lakewood, quoted verbatim from the Lakewood Zoning Code (2025). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.

C-Lsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)45 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) C-L setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

C-Rsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)90 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) C-R setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

LIsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)60 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) LI setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Asetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)10 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size7,000 sq. ft.
Minimum Lot Width75 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-A setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Bsetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size5,000 sq. ft.
Minimum Lot Width60 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-B setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Csetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size1,500 sq. ft.
Minimum Lot Width25 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-C setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-MHsetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)25 ft.
Minimum Lot Width35 (SW) 40 (DW)
Open Space (min %)25%

Lakewood Zoning Code (2025) R-L-MH setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-Msetback & dimensional standards
StandardRequirement
Front Setback (min)10 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)10 ft.
Rear Setback (min)15 ft.
Building Height (max)45 ft.
Minimum Lot Width18 ft.
Open Space (min %)30%

Lakewood Zoning Code (2025) R-M setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.

text

What a pop-top covers

A pop-top in the Denver metro raises or replaces the roof on the existing footprint to add a story or habitable attic. Walls usually stay; massing and bulk plane control the envelope. The existing foundation still has to take the new loads. A municipally licensed Denver general contractor coordinates the project, design professionals, and licensed specialty trades. Cost is project-specific and depends on roof structure, stairs, and how much of the first floor is opened.

text

Bulk plane, height, and landmarks

Zoning height is measured in feet and stories from the front and rear base planes (DZC Sec. 13.1.2). Plans must show allowed versus proposed bulk plane, including roof overhangs. If the existing house already breaks height or bulk rules, elevations should distinguish retained structure from new work. Landmark Preservation lists pop-top/rooftop additions as a review type; designated properties need Landmark approval before zoning or building permits.

text

Permits and who coordinates the work

City and County of Denver Community Planning and Development treats pop-tops like other second-story or attic work: structural review and a sealed structural-integrity letter from a design professional who inspected the existing foundation (DBCA 133.3), plus zoning, building, and typically SUDP. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades plus the design professionals required for the project.

text

What buyers should prepare

Target rooms, roof and attic photos, known foundation issues, and landmark or historic-district status.

FAQ

Common questions

Is a pop-top different from a second-story addition?

A pop-top usually stays on the existing footprint and is controlled by bulk plane. A second-story addition may also expand walls. Both need structural review in Denver.

Who handles pop-top permits and licensing?

A municipally licensed Denver general contractor coordinates the project, design professionals, and specialty trades. Colorado has no statewide general contractor license.

Do historic houses need extra review?

Yes. Landmark lists pop-top/rooftop additions. Approval comes before zoning and building permits on designated properties.

Will the existing foundation work?

Only after a design professional inspects it. CPD asks for a sealed structural-integrity letter for second-story and attic work.

What information helps define scope?

Desired rooms, roof photos, landmark status, and city or county.

Service Area

Serving Lakewood and Jefferson County

We serve Lakewood, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lakewood project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

TRUSTED TO BUILD FOR

  • Punch Bowl SocialFirst four locations
  • Spectrum RetirementSenior living communities
  • Denver HighlandsFirst modular custom home

Let's design your perfect Pop-Top Addition together

Get a personalized estimate in about 2 minutes — no pressure, no obligation.

Licensed & Insured ContractorVeteran-Owned

How This Works (2 minutes)

  1. 1Tell us about your project (30 seconds)
  2. 2Answer a few quick questions for an accurate estimate (60 seconds)
  3. 3Get your personalized estimate instantly (30 seconds)

No pressure. No obligation. No spam calls. If we're not the right fit, we'll tell you — and even recommend someone who is.