DESIGN · BUILD · AUTOMATE
GREENWOOD VILLAGE SERVICES
Motorized Shades & Lighting Control in Greenwood Village
Licensed motorized shades & lighting control services for Greenwood Village and Arapahoe County. Privacy and light on your schedule.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Privacy and light on your schedule
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Motorized Shades & Lighting Control Services in Greenwood Village, Colorado
Autotelic provides professional motorized shades & lighting control services throughout Greenwood Village and the surrounding Arapahoe County area. Motorized shades and Lutron lighting control across the Denver metro — roller shades, drapes, keypads, dimmers, scene programming, and automation. Whether you're in Greenwood Village (Denver Tech Center) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Greenwood Village permit thresholds
- Code reference
- The city operates under the 2018 International Residential Code (IRC) and other 2018 International Codes, along with the 2023 National Electrical Code (NEC) standards.
- Code reference
- Concrete or asphalt work exceeding 100 square feet
- Code reference
- Re-roofs/Repairs involving the removal of 25% or more of the decking
- Code reference
- Landscaping or grading that is more than 10 feet from a property line, not within a drainage easement, involves less than 500 square feet of disturbed area, and less than 10 cubic yards of earthwork
- Code reference
- Re-roofing that only involves laying new shingles and patching unsound decking (less than 25% of decking removal)
- Snow loads
- 30 lbs.
- Ultimate wind speed
- 120 mph (Basic Design) and nominal: 93 mph (allowable stress design)
- Frost depth
- 36 inches
Codes are amended regularly — verify current requirements with **The City of Greenwood Village (specifically its Community Development Department / Building Division) issues residential building permits.
overview
overview
This trade is shade hardware plus lighting-control hardware, not a branded whole-home automation platform. Scope includes roller, dual-roller, cellular, drapery, and exterior-screen motors; battery, 24 V Class 2, or 120 V shade power; LED drivers and dimmers (0–10 V, phase-cut, or DALI where specified); occupancy or vacancy sensors; photocells; and timeclock or astronomical schedules. Integration is typically dry-contact, RS-485, IP, or a lighting-control panel.
permits
permits
City and County of Denver Community Planning and Development issues electrical permits for new circuits, lighting replacements, and line-voltage shade motors. CPD commercial plan-review guidance states that lighting replacements are reviewed so new lighting and lighting controls meet electrical and energy codes. Some minor electrical work can use a CPD quick permit without electrical plan review. DORA licenses electrical contractors. Cities and counties license general contractors. Colorado has no statewide general contractor license.
code
code
Denver Energy Code commercial lighting replacements are reviewed for control compliance. CASR trade guidance for DEC R404.1 states that new lighting in alterations must meet current lighting-control requirements, and Denver does not grant an exception based on the percentage of lighting replaced. Confirm the current DEC edition with CPD at permit. Landmark Preservation reviews exterior work on designated structures and in historic districts. Exterior screens or façade lighting on a designated property may need Landmark review. Interior battery shades that do not change the exterior typically do not.
methods
methods
Specify shade fabric (solar, room-darkening, or dual) and pocket depth before framing closes. Conceal shade power in headers. Match LED drivers to the existing control protocol instead of mixing 0–10 V and phase-cut on one circuit. Keep lighting control off fire-alarm and emergency-lighting circuits. Exterior screens need a wind-sensor lockout. Cost is project-specific.
FAQ
Common questions
Who handles the electrical permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades. CPD issues electrical permits. DORA licenses electrical contractors. Colorado has no statewide general contractor license.
Do battery shades need a permit?
Interior battery shades that do not add line-voltage wiring typically do not need a building permit. Hardwired 120 V motors and new lighting circuits do. Confirm with CPD for the specific scope.
Does replacing some of the lights skip energy-code controls?
Denver CASR trade guidance for DEC R404.1 states that new lighting in alterations must meet current lighting-control requirements. Denver does not grant an exception based on the percentage of lighting replaced. Confirm the current edition with CPD.
When does Landmark apply?
Exterior motorized screens or façade lighting on a designated structure or in a historic district may need Landmark Preservation review in addition to electrical permits.
Service Area
Serving Greenwood Village and Arapahoe County
We serve Greenwood Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Greenwood Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore