DESIGN · BUILD · AUTOMATE

ARVADA SERVICES

Kitchen Remodel in Arvada

Licensed kitchen remodel services for Arvada and Jefferson/Adams County. The kitchen your home deserves.

GET A FREE ESTIMATE CALL (720) 287-7958

Full Design Lifecycle
Construction & Tenant Finish
Smart Home · A/V · Edge Compute

The kitchen your home deserves

EVERY PROJECT STARTS WITH DESIGN

Local Service

Kitchen Remodel Services in Arvada, Colorado

Autotelic provides professional kitchen remodel services throughout Arvada and the surrounding Jefferson/Adams County area. Custom kitchen remodels across the Denver metro featuring cabinetry, stone countertops, smart appliances, and integrated lighting design. Commercially licensed and insured. Whether you're in Arvada (historic Olde Town and rapid growth) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.

Permits & Licensing

Permits in Arvada

Arvada building permits are issued by Building Services, and the city notes that unpermitted work can jeopardize a contractor's licensing as well as a property's resale value. Permit applications, inspection scheduling, and status checks are handled through the separate Arvada Permits (eTRAKiT) site. Authority: City of Arvada — Building Services.

Permit Thresholds

Arvada permit thresholds

Code reference: Arvada requires building permits for most residential construction, alteration, repair, enlargement, replacement, equipment installation, use/occupancy changes, and demolition work, per the City’s Building Permits page and Chapter 18 of the Arvada City Code (which adopts the 2024 International ResOrdinance No. 4921
Code reference: This is assessed in lieu of sales tax on construction materials used in Arvada (Arvada Municipal Code § 98-84).§ 98-84
Code reference: A separate 2026 Building Fee Schedule PDF is referenced but not detailed on the main pages.
Code reference: For the most current or project-specific details (including any local amendments to the 2024 IRC that might address minor/exempt work or structural thresholds), contact the Arvada Building Safety Division or check the adopted codes on the City website, as published information emphasizes case-by-cas

Ordinance No. 4921Source: arvadaco.gov

Codes are amended regularly — verify current requirements with City of Arvada — Building Services.

Energy Code

Arvada energy code quick facts

Code reference: Arvada, Colorado, has adopted the Colorado Low Energy Carbon Code (or Model Low Energy and Carbon Code/MLECC/LECC), based on the 2024 International Energy Conservation Code (IECC), with no additional local energy-code amendments noted beyond the state model. This applies alongside the 2024 Inter
Code reference: Adoption occurred via City Council action on March 24, 2026 (effective for permits submitted on or after approximately July 1, 2026).
Code reference: Arvada (Climate Zone 5B) does not use the Denver Green Code or Energize Denver program.
Code reference: For remodels and additions, the modified/new portions generally must comply with the current code (per IECC/LECC Sections C502/C503 or R502/R503 equivalents) without necessarily triggering updates to unmodified existing systems.
Code reference: Key prescriptive requirements (drawn from the 2024 IECC residential provisions as adopted in the Colorado LECC; values for CZ 5; relevant to new or modified envelope elements in additions/remodels):
Ceiling/attic insulation: Minimum R-49 (Table R402.1.3 / equivalent in LECC).
Wood-frame above-grade wall insulation: Options include R-20 + R-5 ci, R-13 + R-10 ci, or equivalent assembly U-factor ≤ 0.045 (or reduced options such as R-20 cavity with additional efficiency credits per R408); see Table R402.1.2/R402.1.3.
Air leakage (blower-door testing): Maximum 3.0 ACH50 at 50 Pa for the tested dwelling unit or building under the prescriptive path in CZ 3–5 (R402.5.1.3 / equivalent).

Source: arvadaco.gov

Codes are amended regularly — verify current requirements with City of Arvada — Building Services.

Zoning & Dimensional Standards

Setback & dimensional standards in Arvada

Zone-district dimensional standards for Arvada, quoted verbatim from the Arvada Land Development Code. Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.

RN-12.5setback & dimensional standards

Standard	Requirement
Front Setback (min)	30 ft.
Side Interior Setback (min)	10 ft.
Rear Setback (min)	15 ft.
Building Coverage (max)	35%
Building Height (max)	28 ft.
Lot Area (min)	12,500 sf.
Lot Width (min)	100 ft.

Arvada Land Development Code RN-12.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

RN-32.5setback & dimensional standards

Standard	Requirement
Front Setback (min)	30 ft.
Side Interior Setback (min)	15 ft.
Rear Setback (min)	15 ft.
Building Coverage (max)	25%
Building Height (max)	35 ft.
Lot Area (min)	32,500 sf.
Lot Width (min)	100 ft.

Arvada Land Development Code RN-32.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

RN-4setback & dimensional standards

Standard	Requirement
Front Setback (min)	18 ft.
Side Interior Setback (min)	5 ft.
Rear Setback (min)	10 ft.
Building Coverage (max)	40%
Building Height (max)	28 ft.
Lot Area (min)	4,000 sf.
Lot Width (min)	40 ft.

Arvada Land Development Code RN-4 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

RN-6setback & dimensional standards

Standard	Requirement
Front Setback (min)	18 ft.
Side Interior Setback (min)	5 ft.
Rear Setback (min)	10 ft.
Building Coverage (max)	40%
Building Height (max)	28 ft.
Lot Area (min)	6,000 sf.
Lot Width (min)	50 ft.

Arvada Land Development Code RN-6 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

RN-7.5setback & dimensional standards

Standard	Requirement
Front Setback (min)	20 ft.
Side Interior Setback (min)	7.5 ft.
Rear Setback (min)	10 ft.
Building Coverage (max)	40%
Building Height (max)	28 ft.
Lot Area (min)	7,500 sf.
Lot Width (min)	75 ft.

Arvada Land Development Code RN-7.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

RN-Dsetback & dimensional standards

Standard	Requirement
Front Setback (min)	18 ft.
Side Interior Setback (min)	5 ft.
Rear Setback (min)	10 ft.
Building Coverage (max)	40%
Building Height (max)	28 ft.
Lot Area (min)	6,000 sf.
Lot Width (min)	60 ft.

Arvada Land Development Code RN-D setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code

Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.

text

What a kitchen remodel usually includes

A residential kitchen remodel in the Denver metro can mean new cabinets and counters in the existing layout, or a full gut that relocates the sink, dishwasher, range, lighting, and openings to adjacent rooms. Scope commonly covers demolition, plumbing and electrical rough-in when utilities move, cabinetry, countertops, backsplash, flooring transitions, lighting, and finish trim. A municipally licensed Denver general contractor coordinates the overall remodel and the licensed specialty trades required for plumbing, electrical, gas, and related work. Cost is project-specific and depends on whether utilities move, structural openings, finish selections, and access.

text

Layout decisions that change the build

Keeping fixtures in place usually shortens rough-in and inspection scope. Moving a sink, adding an island with water or power, or opening a wall into the living space adds plumbing, electrical, and sometimes structural work. Island plans should confirm floor structure, receptacle needs, and whether a sink or dishwasher will be included. Lock cabinet and counter selections early enough to drive rough dimensions before drywall closes. Long-lead materials often set the critical path after demolition.

text

Permits and who coordinates the work

City and County of Denver Community Planning and Development (CPD) generally requires permits when a kitchen remodel alters the floor plan, affects structure, or relocates electrical or plumbing fixtures. Like-for-like cabinet, counter, flooring, and fixture replacements in the same locations without system changes are often treated as not needing a building permit. Trade work may use CPD Quick Permits when eligible. Cities and counties license general contractors. Colorado has no statewide general contractor license. Electrical and plumbing are state-regulated specialty trades. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for the remodel package.

text

Energy, lead-safe, and inspection sequencing

New lighting installed in an interior residential alteration should follow Denver Energy Code requirements for lighting in alterations. Pre-1978 homes may trigger EPA Renovation, Repair and Painting rules when painted surfaces are disturbed during demo or opening walls. A practical sequence is demo, rough trades, required inspections, close-up, cabinets and counters, finals, then punch. Discovery items such as damaged framing or outdated wiring should be approved before they expand the finish schedule.

FAQ

Common questions

Do I need a Denver permit for a kitchen remodel?

Often yes if you move plumbing or electrical, change gas lines, alter structure, or change the floor plan. Cosmetic-only replacements in the same locations frequently do not need a building permit. City and County of Denver CPD is the building-permit authority inside Denver.

Who handles kitchen remodel permits and licensing?

A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for plumbing, electrical, and related work. CPD issues building and trade permits as applicable. Colorado has no statewide general contractor license.

Does moving the sink or range change the project much?

Yes. Relocating water, drain, vent, gas, or electrical feeds adds rough-in, inspections, and sometimes structural work. Keeping appliances and the sink in place usually simplifies the schedule.

What should be decided before demolition?

Final layout, appliance list, whether walls open, cabinet and counter approach, lighting plan, and flooring transitions. Locked selections reduce mid-project changes after rough-in.

What information helps define an accurate kitchen remodel scope?

Photos or measurements, whether utilities will move, desired finish level, any known electrical panel limits, and the city or county for permitting. Sketches of the target layout help when walls will open.

Service Area

Serving Arvada and Jefferson/Adams County

We serve Arvada, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Arvada project.

FAQ

Common questions

Do I need a permit to remodel my kitchen?

Usually yes — any work touching plumbing, electrical, or structure needs a permit from your city or county building department. Permitting in Colorado is municipal, and we handle the application and inspections as part of the project.

How does the estimate work?

Tell us about your kitchen through the form or a call. You will hear from us in minutes, and we deliver a real estimate within 48 hours — free, and without a pushy sales visit.

Do you handle design as well as construction?

Yes — we are a design-build contractor, so layout, materials, cabinetry, and trades coordination run through one team from drawings to final walk-through.

How It Runs

Survey

Design

Build

Verify

DESIGN SERVICES

Discovery & Site Analysis

Needs + preference programming, site survey, as-built documentation, feasibility.

We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.

Learn more →

Concept Design & Space Planning

Schematic design, floor plan studies, layout options.

Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.

Learn more →

Architectural Design & 3D Renderings

Design development, materials + finishes, photorealistic visualization.

The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.

Learn more →

Construction Documents & Permitting

Full CD sets, structural + MEP engineering coordination, permit-ready drawings.

Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.

Learn more →

CONSTRUCTION

New Construction & Custom Homes

Ground-up homes and light commercial, dirt to keys.

Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.

Learn more →

Remodels & Additions

Kitchens, baths, basements, pop-tops, whole-home.

Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.

Learn more →

Commercial Tenant Finish & Build-Outs

Shells to working spaces — retail, office, restaurant, school.

Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.

Learn more →

ADUs & Modular Construction

Backyard cottages, garage conversions, factory-built homes.

Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.

Learn more →

Outdoor Living & Patio Structures

Decks, pergolas, and dining patios built for Colorado weather.

Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.

Learn more →

TECHNOLOGY

Smart Home Automation

Lighting, shades, climate, audio, security — one interface.

Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.

Learn more →

A/V Systems

Theaters, distributed audio, video walls, commercial sound.

Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.

Learn more →

Control Systems

Custom programming — scenes and schedules that fit the space.

Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.

Learn more →

Networking & Edge Compute

Enterprise Wi-Fi, structured cabling, racks, on-prem compute.

Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.

Learn more →