DESIGN · BUILD · AUTOMATE
LOUISVILLE SERVICES
Kitchen Remodel in Louisville
Kitchen Remodel Design Consultation, $250
Licensed kitchen remodel services for Louisville and Boulder County. The kitchen your home deserves.
What Louisville requires
Code/municipal code sections: Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025). Ord. 2025-1907
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
The kitchen your home deserves
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Kitchen Remodel Design Consultation
A 90-minute in-home working session on layout, finishes, and budget for your kitchen remodel.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
A 90-minute in-home working session on layout, finishes, and budget for your kitchen remodel. You walk away with a written scope summary and a realistic local cost range.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Kitchen Remodel Services in Louisville, Colorado
Autotelic provides professional kitchen remodel services throughout Louisville and the surrounding Boulder County area. Custom kitchen remodels across the Denver metro featuring cabinetry, stone countertops, smart appliances, and integrated lighting design. Commercially licensed and insured. Whether you're in Louisville (between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Kitchen Remodel project
This service is a component of How a Home remodel project works in Louisville.
Permit Thresholds
Louisville permit thresholds
- Code/municipal code sections
- Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025).Ord. 2025-1907
- Building permit fee follows a progressive table (e.g., $0–$500
- $28; higher brackets up to $1M+ with per-$1,000 increments; exact amounts per the published schedule).
- Plan review (in-house)
- 65% of the building fee.
- Boulder County Use Tax
- 1.185% of 50% of Total Valuation.
- City of Louisville Use Tax
- 3.775% of 50% of Total Valuation.
- Code reference
- Impact fees may apply for additions or remodels increasing finished floor area over 500 sq ft (per category tables; first 500 sq ft often exempt).
Codes are amended regularly — verify current requirements with **The City of Louisville, Colorado’s Building Safety Division (part of the city government) issues residential building permits.
Energy Code
Louisville energy code quick facts
- Code reference
- 2024 International Energy Conservation Code (IECC), effective December 6, 2025 (adopted via the City of Louisville’s 2024 ICC Code Adoption ordinance), along with the Colorado Model Electric Ready and Solar Ready Code (also effective 12/6/25).
- Code reference
- Louisville is in Climate Zone 5B.
- Code reference
- The 2024 IECC (with the model ready codes) applies to new construction and, via Chapter 5 [RE], to additions, alterations, and remodels involving the building thermal envelope.
- Code reference
- Key prescriptive requirements relevant to remodels/additions (drawn from 2024 IECC Table R402.1.2 and related sections for CZ 5 / 5B; additions must meet these for new envelope areas or the whole-building UA alternative):
- Ceiling/attic insulation
- Maximum assembly U-factor 0.026 (2024 IECC Table R402.1.2).
- Wood-frame wall insulation
- Maximum assembly U-factor 0.045 (or equivalent prescriptive R-value combinations such as R-20 + R-5ci or R-13 + R-10ci; note R408 tradeoffs may allow reduced wall performance with additional measures) (2024 IECC Table R402.1.2 and R408).
- Vertical fenestration (windows/doors)
- Maximum U-factor 0.28 (2024 IECC Table R402.1.2).
- Skylights
- Maximum U-factor 0.50 (2024 IECC Table R402.1.2).
Codes are amended regularly — verify current requirements with **The City of Louisville, Colorado’s Building Safety Division (part of the city government) issues residential building permits.
text
What a kitchen remodel usually includes
A residential kitchen remodel in the Denver metro can mean new cabinets and counters in the existing layout, or a full gut that relocates the sink, dishwasher, range, lighting, and openings to adjacent rooms. Scope commonly covers demolition, plumbing and electrical rough-in when utilities move, cabinetry, countertops, backsplash, flooring transitions, lighting, and finish trim. A municipally licensed Denver general contractor coordinates the overall remodel and the licensed specialty trades required for plumbing, electrical, gas, and related work. Cost is project-specific and depends on whether utilities move, structural openings, finish selections, and access.
text
Layout decisions that change the build
Keeping fixtures in place usually shortens rough-in and inspection scope. Moving a sink, adding an island with water or power, or opening a wall into the living space adds plumbing, electrical, and sometimes structural work. Island plans should confirm floor structure, receptacle needs, and whether a sink or dishwasher will be included. Lock cabinet and counter selections early enough to drive rough dimensions before drywall closes. Long-lead materials often set the critical path after demolition.
text
Permits and who coordinates the work
City and County of Denver Community Planning and Development (CPD) generally requires permits when a kitchen remodel alters the floor plan, affects structure, or relocates electrical or plumbing fixtures. Like-for-like cabinet, counter, flooring, and fixture replacements in the same locations without system changes are often treated as not needing a building permit. Trade work may use CPD Quick Permits when eligible. Cities and counties license general contractors. Colorado has no statewide general contractor license. Electrical and plumbing are state-regulated specialty trades. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for the remodel package.
text
Energy, lead-safe, and inspection sequencing
New lighting installed in an interior residential alteration should follow Denver Energy Code requirements for lighting in alterations. Pre-1978 homes may trigger EPA Renovation, Repair and Painting rules when painted surfaces are disturbed during demo or opening walls. A practical sequence is demo, rough trades, required inspections, close-up, cabinets and counters, finals, then punch. Discovery items such as damaged framing or outdated wiring should be approved before they expand the finish schedule.
Service Area
Serving Louisville and Boulder County
We serve Louisville, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Louisville project.
FAQ
Common questions
How much does Kitchen Remodel Design Consultation cost in Louisville?
$250.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Do I need a permit to remodel my kitchen?
Usually yes — any work touching plumbing, electrical, or structure needs a permit from your city or county building department. Permitting in Colorado is municipal, and we handle the application and inspections as part of the project.
How does the estimate work?
Tell us about your kitchen through the form or a call. Use the Instant Estimate tool for a real, scored estimate in about two minutes — free, and without a pushy sales visit.
Do you handle design as well as construction?
Yes — we are a design-build contractor, so layout, materials, cabinetry, and trades coordination run through one team from drawings to final walk-through.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Let's design your perfect Kitchen Remodel together
Get a personalized estimate in about 2 minutes — no pressure, no obligation.
How This Works (2 minutes)
- 1Tell us about your project (30 seconds)
- 2Answer a few quick questions for an accurate estimate (60 seconds)
- 3Get your personalized estimate instantly (30 seconds)
No pressure. No obligation. No spam calls. If we're not the right fit, we'll tell you — and even recommend someone who is.
Explore
Also serving
Explore