DESIGN · BUILD · AUTOMATE
SUPERIOR SERVICES
EV Charging in Superior
Licensed ev charging services for Superior and Boulder County. Charge at home or work.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Charge at home or work
EVERY PROJECT STARTS WITH DESIGN
Local Service
EV Charging Services in Superior, Colorado
Autotelic provides professional ev charging services throughout Superior and the surrounding Boulder County area. Level 2 and commercial DC fast charger installation with dedicated circuits, conduit, and smart charging management. Whether you're in Superior (south Boulder County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Superior permit thresholds
- Code reference
- A permit is required for all types of remodels including basement finishes, structural repairs, replacement of windows, additions, decks, fences, retaining walls over 4 ft. tall, roof replacements/repairs, insulation installation (with specific guidelines), mechanical equipment (e.g., AC
- Exempt work is not exhaustively listed but implied by the requirements
- e.g., detached accessory structures ≤200 sq. ft. do not require a permit (only those >200 sq. ft. do).
- Code reference
- These requirements align with the Town’s adoption of the 2024 International Residential Code (IRC) and related codes (with local amendments) under Chapter 18 of the Superior Municipal Code (see also Sec. 18-1-10 et seq.Sec. 18-1-10
- Code reference
- Specific permit triggers and exemptions follow the adopted codes (typically IRC Section R105 or equivalent) as locally implemented and detailed on the town’s guidance page.Section R105
- Plan Review Fee
- 65% of the Building Permit Fee (in addition to the Building Permit Fee).
- Town Use Tax
- 3.775% (2025) of 50% of total project valuation (materials cost assumed to be 50% of total valuation).
- County Use Tax
- 1.335% (2026) of 50% of total project valuation (materials cost assumed to be 50% of total valuation).
Codes are amended regularly — verify current requirements with **The Town of Superior’s Building Department (operated by SAFEbuilt) issues residential building permits.
text
What EV charging installation covers
EV charging work in the Denver metro area centers on Level 2 EVSE (electric vehicle supply equipment) for residential and commercial sites. Level 1 charging is usually too slow for daily driving needs. DC fast charging (Level 3) is typically reserved for commercial, fleet, or public sites because of higher power demand and distribution design. A complete project usually includes site assessment, electrical load calculation, a dedicated 240-volt branch circuit, properly sized wiring and conduit, EVSE mounting, final connections, testing, and permit/inspection coordination. Commercial projects often add multi-station power distribution, load management, and future expansion planning.
text
Typical technical scope of work
Installation work commonly includes: evaluating panel capacity and service size (for example 100-amp versus 200-amp service); calculating existing continuous loads; determining whether a panel or service upgrade is required; installing a dedicated double-pole branch circuit for the EVSE; routing appropriately gauged conductors in conduit (EMT, rigid metal, or code-allowed nonmetallic); hardwiring the charger or installing a NEMA 14-50 receptacle where the equipment and amperage allow; mounting wall or pedestal EVSE; verifying voltage, breaker sizing, grounding, and charging communication; and coordinating inspections before the circuit is placed in normal use. Outdoor or detached-garage runs may require trenching and weather-rated equipment. Load-shedding or smart load-management devices may be considered when a full panel upgrade is not required after calculation.
text
Equipment classes, materials, and methods
Most home and many commercial installs use Level 2 chargers on 208–240V AC, commonly on 40A or 50A dedicated circuits depending on the unit’s continuous load rating. Equipment classes include wall-mounted residential EVSE, commercial wall units, and outdoor pedestal stations. Popular unit categories include Tesla Wall Connector, ChargePoint Home Flex, and Enel X JuiceBox-style Level 2 stations; equipment should be UL-listed for EV charging use. Branch-circuit design follows NEC continuous-load rules: circuit ampacity is sized at not less than 125% of the EVSE maximum continuous load (for example, a 48A charger needs a 60A circuit). Wiring is selected by ampacity and run method under NEC Article 625 and related articles. Overcurrent protection uses a dedicated double-pole breaker. GFCI protection is required for EVSE under NEC 625.54 (2020 and 2023 editions). Disconnecting means are required where EVSE exceeds 60A or 150V-to-ground. Mounting location, cable length, indoor versus outdoor exposure, and distance from the panel drive conduit length, pull difficulty, and installation complexity.
text
Codes, permits, and Denver requirements
Level 2 EV charger work that adds a new 240V circuit, upgrades a panel, or substantially modifies wiring requires an electrical permit and inspection. Inside the City and County of Denver, electrical permits and inspections are handled through Community Planning & Development. In some surrounding jurisdictions, the Colorado State Electrical Board is the authority having jurisdiction. Core code framework is NEC Article 625 (Electric Vehicle Power Transfer System), including dedicated branch circuit (625.40), continuous-load sizing (625.42), GFCI (625.54), equipment grounding, UL-verified equipment (625.5), and disconnect rules (625.43). Denver Energy Code also requires EV-ready provisions in new one- and two-family homes and new garages/carports—typically a 40A, 240V dedicated branch circuit with a labeled double-pole breaker. Multi-family projects may need a mix of EV-installed, EV-ready, and EV-capable spaces. Unpermitted work can create inspection failures, insurance problems, and resale issues.
text
What buyers should evaluate before installing
Review main-breaker amperage and spare panel capacity before selecting charger speed. Confirm vehicle inlet compatibility and desired Level 2 amperage. Compare hardwired EVSE versus plug-in NEMA 14-50 configurations based on equipment listing and continuous load. Map charger placement relative to the panel—shorter indoor garage runs are usually simpler than long outdoor or detached-garage routes. Ask for a documented load calculation, not just a visual glance at open breaker spaces. Confirm who will pull the permit, schedule inspection, and correct punch-list items. If capacity is tight, ask whether load management is a code-compliant alternative to a service upgrade. For incentives, verify current federal, Colorado Energy Office, and utility (including Xcel Energy) eligibility rules for ENERGY STAR or other qualifying Level 2 equipment and installation documentation. Compare written scopes that separate circuit work, conduit path, panel/service work if needed, equipment, and permit handling.
text
Commercial and multi-station considerations
Commercial and fleet charging often requires electrical distribution design beyond a single branch circuit: feeder capacity, panelboard or dedicated EV panel layout, demand management across multiple ports, shared parking sequencing, pedestal foundations, outdoor-rated raceways, and future expansion spare capacity. Projects may combine Level 2 workplace charging with selective DC fast charging for fleet turnaround. Early coordination on utility service capacity, parking geometry, ADA pathing, and load management software or hardware is important so the first stations do not block later build-out.
FAQ
Common questions
What charger level is usually installed for Denver homes and workplaces?
Level 2 EVSE on 208–240V is the common choice for residential and many commercial sites. Level 1 is generally too slow for daily use. DC fast charging is typically limited to commercial, fleet, or public applications because of higher power and infrastructure requirements.
Will my electrical panel support a Level 2 charger?
That depends on service size, existing continuous loads, and available capacity—not only open breaker spaces. Many older homes with 100-amp service need a panel or service upgrade for a full-speed Level 2 circuit, especially with other high-draw appliances. A load calculation determines whether a dedicated circuit, load management, or an upgrade is appropriate.
Do I need a permit for a Level 2 EV charger in Denver?
Yes. New 240V circuits, panel upgrades, and substantial wiring changes for EVSE require electrical permits and final inspection. In Denver city limits, Community Planning & Development handles electrical permits and inspections; surrounding jurisdictions may use the Colorado State Electrical Board or local AHJ processes.
What circuit size is needed for a Level 2 charger?
Circuits are sized to the EVSE continuous load at 125% under NEC rules. Many residential Level 2 units use 40A or 50A circuits; a 48A charger requires a 60A circuit. The exact breaker and conductor size follow the listed equipment rating and local inspection requirements, including GFCI protection.
Who handles the electrical permits and licensing for EV charger installation?
A municipally licensed Denver general contractor coordinates the project and works with licensed specialty electrical trades for the circuit, panel, and EVSE work. Permits and inspections are obtained through the applicable authority having jurisdiction, such as Denver Community Planning & Development or the relevant metro-area electrical permitting body.
Is hardwired better than a NEMA 14-50 plug-in setup?
Both can be code-compliant when matched to listed equipment and circuit design. Hardwired EVSE is common for higher continuous loads and permanent installations. Plug-in NEMA 14-50 setups may fit certain units and use cases, but outlet, cord, and breaker ratings must match the continuous-load and manufacturer requirements.
Are rebates available for Level 2 chargers?
Federal, state, and utility incentives may be available depending on equipment eligibility, ENERGY STAR status where required, installer documentation, and current program rules. Xcel Energy and other programs have offered wiring and charger incentives at various times; eligibility should be verified against the current program requirements before equipment selection.
Service Area
Serving Superior and Boulder County
We serve Superior, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Superior project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore