
Barn Door Kit Installation
Install one customer-supplied barn door kit (door up to 42 in x 84 in, up to 100 lb): mount header board or blocking into studs, hang rail…
$345
Prehung doors, hardware, baseboard, casing, stair parts, and finish carpentry by the opening or linear foot.
For owners replacing doors or adding trim who want the price before the carpenter arrives.
Fitting, fastening, caulk-ready joints, and the adjustment that makes the door or trim work the day we leave.
Count the openings or linear feet, pick the card, and book a slot online.

Install one customer-supplied barn door kit (door up to 42 in x 84 in, up to 100 lb): mount header board or blocking into studs, hang rail…
$345

One bifold opening: re-track, replace pivots/guides/snuggers, and align existing doors — or install one customer-supplied replacement…
$185

Replace up to three customer-supplied knobs, deadbolts, or smart locks on standard-bore doors, including latch alignment and strike…
$165

Fix rubbing/sticking interior doors: plane or belt-sand edges, shim or reset hinges, adjust strike plates, and seal raw planed edges.
from $95

Weather-seal one exterior door: replace kerf-in or nail-on weatherstripping on all three sides, install new door sweep or replace sill…
$165

Refinish one wood or fiberglass entry door in place: sand/strip failed finish, condition, apply stain (or exterior enamel) plus…
$595

Replace an existing opener with a customer-supplied smart unit on a standard sectional door, including rail assembly, safety-eye…
$325

Remove an existing interior door and install a customer-supplied prehung unit in the same rough opening, including shimming, hardware, and…
$425

Replace one interior door slab in an existing square jamb: mortise hinges, bore lockset (if slab is unbored), hang, and adjust for even…
$225

Installation of one customer-supplied storm door (standard 32 in or 36 in) on an existing square entry frame: hinge-rail fitting, closer…
$425

Supply and install primed MDF baseboard up to 4.25 in tall: remove and haul away old base, cut, cope inside corners, nail, fill nail…
from $150

Supply and install primed quarter-round or shoe molding along existing baseboard: cut, cope, nail, and fill nail holes.
from $95

Case one standard window (up to 4x5 ft) in primed MDF: picture-frame or stool-and-apron style, mitered, nailed, filled, and caulked.
from $95

Replace wood balusters with customer-supplied iron or wood balusters (existing rail and shoe stay in place): cut out old, drill/epoxy or…
from $150

Remove and replace one wall-mounted handrail on a straight stair run up to 16 lf: paint-grade rail, code-compliant returns at both ends,…
$495

Remove existing attic ladder and install a new standard wood attic ladder (fits existing 22.5 x 54 in rough opening, ceilings 8-10 ft):…
$675

Install one shelf-and-rod run on a closet wall up to 8 ft: cleats into studs, melamine or paint-grade shelf, metal rod with center support.
$245

Install customer-supplied floating shelves up to 36 in wide: locate studs, mount hidden brackets level, and set shelves rated to…
from $75

Assembly of one customer-supplied freestanding garage shelving unit (steel or resin, up to 77 in tall x 48 in wide) and anti-tip anchoring…
$165

Install primed MDF shiplap on one wall up to 12 ft wide x 9 ft tall (108 sq ft cap): locate studs, level first course, nail, trim…
$895

Install ventilated wire shelving in one reach-in closet up to 6 ft wide: up to three wall runs (shelf or shelf-and-rod), wall clips into…
$325
Tell me what you want installed and where; I will find the fixed-price card for it.
Talk to Chloe