DESIGN · BUILD · AUTOMATE
WHEAT RIDGE SERVICES
Bathroom Remodel in Wheat Ridge
Licensed bathroom remodel services for Wheat Ridge and Jefferson County. Transform your bathroom into a retreat.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Transform your bathroom into a retreat
EVERY PROJECT STARTS WITH DESIGN
Local Service
Bathroom Remodel Services in Wheat Ridge, Colorado
Autotelic provides professional bathroom remodel services throughout Wheat Ridge and the surrounding Jefferson County area. Full bathroom remodels across the Denver metro from cosmetic refreshes to luxury gut renovations. Tile, fixtures, vanities, and Kerdi waterproofing. Whether you're in Wheat Ridge (central Jefferson County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Wheat Ridge permit thresholds
- Code reference
- Retaining walls over 4' high (or supporting a surcharge) and other structural elements like decks or room additions explicitly require permits; any structural work in a remodel would qualify as an alteration requiring a permit.
- Code reference
- These requirements are enforced under the City of Wheat Ridge Municipal Code, Chapter 5, Article II, Division 2 (Building Permits).
- Use tax
- Per City Code Section 22-68, use tax is charged at 3.5% of 60% of the project valuation (60% of valuation is assumed to be materials subject to tax).Section 22-68
- Code reference
- Permit fees are based on the higher of the applicant’s valuation or the building official’s minimum (using ICC Building Valuation Data); a separate plan review fee (65% of the permit fee) applies where required.
Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.
Energy Code
Wheat Ridge energy code quick facts
- Code reference
- 2024 IECC (with Colorado Model Low Energy and Carbon Code, 2025 edition, and Colorado Model Electric Ready and Solar Ready Code), adopted by reference with primarily administrative/local amendments (no technical energy amendments noted).
- Code reference
- This replaces the prior 2018 I-Codes.
- Code reference
- City Council approved on October 27, 2025 (Ordinance 1883); the 2024 codes (including 2024 IECC, excluding Chapter 1 but retaining Sections C102, R102, C107, and R107) apply to all new permit applications beginning January 1, 2026.Ordinance 1883
- Code reference
- Wheat Ridge is in Climate Zone 5B.
- Code reference
- Requirements for remodels/additions generally follow the 2024 IECC (and Colorado model code) provisions applicable to existing buildings (often via IEBC cross-references or specific existing-building sections), with no local technical amendments identified that alter prescriptive values.
- Code reference
- Specific numeric prescriptive requirements (e.g., R-values, U-factors, air-sealing thresholds) are those in the base 2024 IECC/Colorado model code for CZ 5B; local adoption does not modify them.
- Permit-related tax/fee (construction use tax)
- Use tax of 3.5% applied to 60% of the project valuation (separate from and in addition to the building permit fee, which is calculated via a tiered schedule based on valuation).
- Code reference
- Adopting references include Chapter 5 of the Wheat Ridge Municipal Code (incorporating the listed codes by reference) and Ordinance 1883.Ordinance 1883
Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.
Zoning & Dimensional Standards
Setback & dimensional standards in Wheat Ridge
Zone-district dimensional standards for Wheat Ridge, quoted verbatim from the Wheat Ridge Code of Ordinances (Ch.26 Zoning). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
A-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' (g) |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 1 acre |
| Lot Width (min) | 140' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
A-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' (g) |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 1 acre |
| Lot Width (min) | 140' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 12,500 sf |
| Lot Width (min) | 100' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (c) |
| Side Setback (min) | 10' |
| Rear Setback (min) | 15' (h) |
| Building Coverage (max) | 30% |
| Building Height (max) | 35' |
| Lot Area (min) | 9,000 sf |
| Lot Width (min) | 75' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Bsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (e) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1B setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Csetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 20' (d) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 5' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 5,000 sf |
| Lot Width (min) | 50' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1C setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (e) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 9,000 sf |
| Lot Width (min) | 75' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-2Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (d) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-3setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (e) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-3Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (e) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What a bathroom remodel usually includes
A residential bathroom remodel in the Denver metro can mean a cosmetic refresh or a full gut. Full scopes commonly cover demolition, plumbing and electrical rough-in, ventilation, waterproofing, shower or tub rebuilds, tile, vanity and lighting, and finish trim. Keeping fixtures in place is simpler than moving the toilet, shower, or sink, because relocating drains and vents changes rough-in complexity. A municipally licensed Denver general contractor coordinates the overall remodel and the licensed specialty trades required for plumbing, electrical, and related work. Cost is project-specific and depends on layout changes, wet-area rebuilds, finish selections, and access.
text
Layout, waterproofing, and ventilation
Good bathroom plans start with clearances, door swings, storage, and how water moves to the drain. Shower and tub surrounds need a continuous waterproofing strategy behind the finish surface. Exhaust ventilation should pull moist air out of the room so finishes and framing stay drier over time. If the remodel opens walls or ceilings, it is also the practical window to update outdated wiring, add GFCI protection where required, and correct undersized or missing exhaust routes.
text
Finishes and sequencing
Tile, waterproof membranes, vanity tops, fixtures, glass, paint, and flooring need a defined sequence so wet work cures before finishes go in. Material lead times often drive the schedule more than labor once demolition is done. A written selection list before rough-in reduces change orders after walls close. Accessibility updates such as curbless showers, grab-bar blocking, and clearer floor space can be planned into the same remodel when that is a goal.
text
Permits and who coordinates the work
Many bathroom remodels that move plumbing, change electrical circuits, or alter walls require permits and inspections through the local city or county. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for the remodel package. Permit responsibility and inspection sequencing should be stated in the project plan.
FAQ
Common questions
Can bathroom fixtures stay in the same location?
Yes, and that usually shortens the plumbing and waterproofing scope. Moving a toilet, shower, or vanity drain adds rough-in work and may affect framing and venting.
Who handles bathroom remodel permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for plumbing, electrical, and related work. Local city or county building departments issue applicable permits. Colorado has no statewide general contractor license.
How long does a typical bathroom remodel take?
Duration depends on whether fixtures move, how much wet-area rebuild is needed, and finish lead times. A cosmetic refresh is shorter than a full gut with tile showers and layout changes. A site assessment produces a realistic schedule.
What decisions are needed before demolition?
Final fixture layout, shower versus tub, tile and waterproofing approach, vanity size, lighting plan, flooring, and whether heated floors or accessibility features are included. Locked selections reduce mid-project changes.
What information helps define an accurate bathroom remodel scope?
Room photos or measurements, whether fixtures will move, desired finish level, any water damage history, and the city or county for permitting. Sketches of the target layout help when walls will open.
Service Area
Serving Wheat Ridge and Jefferson County
We serve Wheat Ridge, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Wheat Ridge project.
FAQ
Common questions
Do bathroom remodels need permits?
Almost always — moving plumbing, changing electrical, or altering walls triggers a municipal permit. We pull the permit with your city or county and schedule the inspections.
Can you renovate multiple bathrooms at once?
Yes. We regularly run multi-bath renovation packages and sequence the work so you keep at least one working bathroom throughout.
How fast can it start?
You will hear from us in minutes and have an estimate within 48 hours. Start dates depend on permit turnaround in your city and material lead times, which we lay out in the proposal.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore