DESIGN · BUILD · AUTOMATE
LOUISVILLE SERVICES
MEP Engineering in Louisville
Site visit and written estimate, $149
Licensed MEP engineering services for Louisville and Boulder County. Mechanical, electrical, and plumbing design.
What Louisville requires
Code/municipal code sections: Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025). Ord. 2025-1907
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Mechanical, electrical, and plumbing design
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Site visit and written estimate
We come out, look at the job and send you a written estimate.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
We come out, look at the job and send you a written estimate. The visit is credited to the job if you go ahead.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
MEP Engineering Services in Louisville, Colorado
Autotelic provides professional MEP engineering services throughout Louisville and the surrounding Boulder County area. Professional MEP engineering services including HVAC design, electrical load calculations, plumbing layouts, and energy code compliance. Whether you're in Louisville (between Denver and Boulder) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a MEP Engineering project
This service is a component of How a New build project works in Louisville.
Permit Thresholds
Louisville permit thresholds
- Code/municipal code sections
- Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025).Ord. 2025-1907
- Building permit fee follows a progressive table (e.g., $0–$500
- $28; higher brackets up to $1M+ with per-$1,000 increments; exact amounts per the published schedule).
- Plan review (in-house)
- 65% of the building fee.
- Boulder County Use Tax
- 1.185% of 50% of Total Valuation.
- City of Louisville Use Tax
- 3.775% of 50% of Total Valuation.
- Code reference
- Impact fees may apply for additions or remodels increasing finished floor area over 500 sq ft (per category tables; first 500 sq ft often exempt).
Codes are amended regularly — verify current requirements with **The City of Louisville, Colorado’s Building Safety Division (part of the city government) issues residential building permits.
text
What MEP coordination covers
MEP engineering coordination on Denver-metro projects means bringing design professionals into mechanical, electrical, and plumbing scopes: HVAC loads and duct layouts, electrical one-lines and panel schedules, plumbing risers, and energy-code documentation. The general contractor coordinates schedule, permitting, and construction around sealed drawings. A municipally licensed Denver general contractor does not replace the engineer of record; it coordinates design professionals and the build team. Cost is project-specific and depends on building type and system complexity.
text
What buyers should prepare
Project type (tenant finish, addition, equipment swap), any existing drawings, and known panel, HVAC, or plumbing capacity limits.
FAQ
Common questions
How much does Site visit and written estimate cost in Louisville?
$149.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles MEP permits and licensing?
A municipally licensed Denver general contractor coordinates the project, design professionals, and specialty trades. Colorado has no statewide general contractor license.
Is the GC the MEP engineer of record?
No. Sealed mechanical, electrical, and plumbing design is provided by design professionals who seal the documents. The GC coordinates construction around those documents.
When is an SUDP involved?
Denver DOTI reviews Sewer Use and Drainage with most building-permit packages, including many remodels, because fixture or drainage changes can affect sewer use.
What information helps define scope?
Desired system changes, existing drawings if any, photos of equipment and panels, and city or county.
Service Area
Serving Louisville and Boulder County
We serve Louisville, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Louisville project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore