autotelic.build

DESIGN · BUILD · AUTOMATE

WHEAT RIDGE SERVICES

Epoxy Coatings in Wheat Ridge

Licensed epoxy coatings services for Wheat Ridge and Jefferson County. Durable, beautiful floor finishes.

  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Epoxy Coatings

Durable, beautiful floor finishes

Local Service

Epoxy Coatings Services in Wheat Ridge, Colorado

Autotelic provides professional epoxy coatings services throughout Wheat Ridge and the surrounding Jefferson County area. Garage, commercial, and industrial epoxy floor coatings including solid, flake, and metallic finishes with proper surface prep. Whether you're in Wheat Ridge (central Jefferson County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.

Permit Thresholds

Wheat Ridge permit thresholds

Code reference
Retaining walls over 4' high (or supporting a surcharge) and other structural elements like decks or room additions explicitly require permits; any structural work in a remodel would qualify as an alteration requiring a permit.
Code reference
These requirements are enforced under the City of Wheat Ridge Municipal Code, Chapter 5, Article II, Division 2 (Building Permits).
Use tax
Per City Code Section 22-68, use tax is charged at 3.5% of 60% of the project valuation (60% of valuation is assumed to be materials subject to tax).Section 22-68
Code reference
Permit fees are based on the higher of the applicant’s valuation or the building official’s minimum (using ICC Building Valuation Data); a separate plan review fee (65% of the permit fee) applies where required.

Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.

Energy Code

Wheat Ridge energy code quick facts

Code reference
2024 IECC (with Colorado Model Low Energy and Carbon Code, 2025 edition, and Colorado Model Electric Ready and Solar Ready Code), adopted by reference with primarily administrative/local amendments (no technical energy amendments noted).
Code reference
This replaces the prior 2018 I-Codes.
Code reference
City Council approved on October 27, 2025 (Ordinance 1883); the 2024 codes (including 2024 IECC, excluding Chapter 1 but retaining Sections C102, R102, C107, and R107) apply to all new permit applications beginning January 1, 2026.Ordinance 1883
Code reference
Wheat Ridge is in Climate Zone 5B.
Code reference
Requirements for remodels/additions generally follow the 2024 IECC (and Colorado model code) provisions applicable to existing buildings (often via IEBC cross-references or specific existing-building sections), with no local technical amendments identified that alter prescriptive values.
Code reference
Specific numeric prescriptive requirements (e.g., R-values, U-factors, air-sealing thresholds) are those in the base 2024 IECC/Colorado model code for CZ 5B; local adoption does not modify them.
Permit-related tax/fee (construction use tax)
Use tax of 3.5% applied to 60% of the project valuation (separate from and in addition to the building permit fee, which is calculated via a tiered schedule based on valuation).
Code reference
Adopting references include Chapter 5 of the Wheat Ridge Municipal Code (incorporating the listed codes by reference) and Ordinance 1883.Ordinance 1883

Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.

Zoning & Dimensional Standards

Setback & dimensional standards in Wheat Ridge

Zone-district dimensional standards for Wheat Ridge, quoted verbatim from the Wheat Ridge Code of Ordinances (Ch.26 Zoning). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.

A-1setback & dimensional standards
StandardRequirement
Front Setback (min)30' (c)
Side Setback (min)15'
Rear Setback (min)15' (g)
Building Coverage (max)25%
Building Height (max)35'
Lot Area (min)1 acre
Lot Width (min)140'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

A-2setback & dimensional standards
StandardRequirement
Front Setback (min)30' (c)
Side Setback (min)15'
Rear Setback (min)15' (g)
Building Coverage (max)25%
Building Height (max)35'
Lot Area (min)1 acre
Lot Width (min)140'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-1setback & dimensional standards
StandardRequirement
Front Setback (min)30' (c)
Side Setback (min)15'
Rear Setback (min)15'
Building Coverage (max)25%
Building Height (max)35'
Lot Area (min)12,500 sf
Lot Width (min)100'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-1Asetback & dimensional standards
StandardRequirement
Front Setback (min)25' (c)
Side Setback (min)10'
Rear Setback (min)15' (h)
Building Coverage (max)30%
Building Height (max)35'
Lot Area (min)9,000 sf
Lot Width (min)75'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-1Bsetback & dimensional standards
StandardRequirement
Front Setback (min)25' (d)
Side Setback (min)5' (e)
Rear Setback (min)10'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)7,500 sf
Lot Width (min)60'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1B setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-1Csetback & dimensional standards
StandardRequirement
Front Setback (min)20' (d)
Side Setback (min)5'
Rear Setback (min)5'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)5,000 sf
Lot Width (min)50'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1C setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-2setback & dimensional standards
StandardRequirement
Front Setback (min)25' (d)
Side Setback (min)5' (e)
Rear Setback (min)10'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)9,000 sf
Lot Width (min)75'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-2Asetback & dimensional standards
StandardRequirement
Front Setback (min)25' (d)
Side Setback (min)5' (d)
Rear Setback (min)10'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)7,500 sf
Lot Width (min)60'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-3setback & dimensional standards
StandardRequirement
Front Setback (min)25' (e)
Side Setback (min)5'
Rear Setback (min)10'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)7,500 sf
Lot Width (min)60'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

R-3Asetback & dimensional standards
StandardRequirement
Front Setback (min)25' (e)
Side Setback (min)5'
Rear Setback (min)10'
Building Coverage (max)40%
Building Height (max)35'
Lot Area (min)7,500 sf
Lot Width (min)60'

Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code

Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.

text

What this covers

Resin floor or wall coatings over concrete or a prepared slab. Prep (grind, crack fill, moisture check) drives whether the coating will stay down.

text

How the work is coordinated

Cure time depends on product and temperature; no invented mil-thickness brands. Denver-metro work is permitted locally. Colorado has no statewide general-contractor license. Cities and counties license general contractors. DORA licenses electrical and plumbing (and similar regulated trades), not general contractors. Autotelic is a municipally licensed Denver general contractor that coordinates licensed specialty trades. Denver building permits run through Community Planning and Development (CPD). Costs are project-specific; no dollar figures.

FAQ

Common questions

Who handles the epoxy coatings permits and licensing?

A municipally licensed Denver general contractor coordinates licensed specialty trades. Colorado has no statewide general-contractor license; cities and counties license general contractors. DORA licenses electrical and plumbing, not general contractors.

What is typically in scope for epoxy coatings in Denver?

Resin floor or wall coatings over concrete or a prepared slab.

When do you need drawings or a permit?

Anything that changes structure, occupancy, or regulated electrical or plumbing usually needs a local permit. Denver building permits are reviewed by Community Planning and Development. Confirm the exact trigger with CPD for the address.

Service Area

Serving Wheat Ridge and Jefferson County

We serve Wheat Ridge, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Wheat Ridge project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

TRUSTED TO BUILD FOR

  • Punch Bowl SocialFirst four locations
  • Spectrum RetirementSenior living communities
  • Denver HighlandsFirst modular custom home

Free Estimate

Get a free epoxy coatings estimate in Wheat Ridge

Tell us about your Wheat Ridge project — we respond fast, and estimates are always free.

Name, phone, and email required.