DESIGN · BUILD · AUTOMATE
ERIE SERVICES
Epoxy Coatings in Erie
Site visit and written estimate, $149
Licensed epoxy coatings services for Erie and Boulder/Weld County. Durable, beautiful floor finishes.
What Erie requires
Code reference: This adoption was approved by the Erie Town Council via Ordinance No. 12-2026. Ord. No. 12-2026
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Durable, beautiful floor finishes
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Site visit and written estimate
We come out, look at the job and send you a written estimate.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
We come out, look at the job and send you a written estimate. The visit is credited to the job if you go ahead.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Epoxy Coatings Services in Erie, Colorado
Autotelic provides professional epoxy coatings services throughout Erie and the surrounding Boulder/Weld County area. Garage, commercial, and industrial epoxy floor coatings including solid, flake, and metallic finishes with proper surface prep. Whether you're in Erie (fast-growing between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Epoxy Coatings project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Erie permit thresholds
- Code reference
- The Town of Erie has adopted the 2021 International Residential Code (IRC).
- Code reference
- Roofing (more than 1 square aggregate)
- Code reference
- Retaining walls over 4 feet from the bottom of the trench to the top of the wall
- Code reference
- Detached accessory structures 200 sq. ft. or less (not including patio covers, and provided there is no electrical and/or plumbing work)
- Code reference
- Minor fence repair (3 sections or less)
- Code reference
- Minor roof repairs (1 square or less)
- Code reference
- Decks, platforms, walks, and driveways not more than 30 inches above grade and not over any basement or story below
- Code reference
- Examples of square foot construction costs for valuation (as of January 1, 2026):
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
Energy Code
Erie energy code quick facts
- Code reference
- The Town of Erie, Colorado, has adopted the 2024 International Energy Conservation Code (IECC) with local amendments, effective April 24, 2026.
- Code reference
- This adoption was approved by the Erie Town Council via Ordinance No. 12-2026.Ord. No. 12-2026
- Code reference
- Erie is located in Climate Zone 5B.
- Code reference
- While Erie has adopted the 2024 IECC with local amendments, the specific details of these amendments relevant to prescriptive requirements for remodels and additions were not detailed in the publicly available information.
- Code reference
- Therefore, the following prescriptive requirements are based on the base 2024 IECC for Climate Zone 5B, which Erie adopted, and are subject to any specific local modifications enacted through Ordinance No. 12-2026.Ord. No. 12-2026
- Wall Insulation (Residential)
- The building thermal envelope for walls shall meet requirements specified in Table R402.1.2.
- Code reference
- A common prescriptive option for framed walls in Climate Zone 5B is R-20 continuous insulation, or R-13 cavity insulation plus R-5 continuous insulation (denoted as "13&5").
- Code reference
- The 2024 IECC also offers additional flexibility for wall insulation in Climate Zones 4 and 5 if additional credits are achieved.
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
text
What this covers
Resin floor or wall coatings over concrete or a prepared slab. Prep (grind, crack fill, moisture check) drives whether the coating will stay down.
text
How the work is coordinated
Cure time depends on product and temperature; no invented mil-thickness brands. Denver-metro work is permitted locally. Colorado has no statewide general-contractor license. Cities and counties license general contractors. DORA licenses electrical and plumbing (and similar regulated trades), not general contractors. Autotelic is a municipally licensed Denver general contractor that coordinates licensed specialty trades. Denver building permits run through Community Planning and Development (CPD). Costs are project-specific; no dollar figures.
FAQ
Common questions
How much does Site visit and written estimate cost in Erie?
$149.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles the epoxy coatings permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades. Colorado has no statewide general-contractor license; cities and counties license general contractors. DORA licenses electrical and plumbing, not general contractors.
What is typically in scope for epoxy coatings in Denver?
Resin floor or wall coatings over concrete or a prepared slab.
When do you need drawings or a permit?
Anything that changes structure, occupancy, or regulated electrical or plumbing usually needs a local permit. Denver building permits are reviewed by Community Planning and Development. Confirm the exact trigger with CPD for the address.
Service Area
Serving Erie and Boulder/Weld County
We serve Erie, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Erie project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore