DESIGN · BUILD · AUTOMATE
THORNTON SERVICES
Demolition in Thornton
Site visit and written estimate, $149
Licensed demolition services for Thornton and Adams County. Controlled demo with precision.
What Thornton requires
Code reference: This is adopted by reference in Thornton City Code Sec. 10-174 (with amendments in Sec. 10-175), along with the 2024 International Existing Building Code. §10-174
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Controlled demo with precision
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Site visit and written estimate
We come out, look at the job and send you a written estimate.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
We come out, look at the job and send you a written estimate. The visit is credited to the job if you go ahead.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Demolition Services in Thornton, Colorado
Autotelic provides professional demolition services throughout Thornton and the surrounding Adams County area. Selective and full demolition services including hazardous material abatement, structural demo, and complete haul-off. Whether you're in Thornton (one of Colorado's fastest-growing cities) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a Demolition project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Thornton permit thresholds
- Code reference
- This applies to residential remodels and is governed by the city’s adopted codes (2024 International Residential Code, 2024 International Existing Building Code, and related codes with local amendments, effective for applications on or after July 1, 2025).
- Code reference
- Attached decks of any height; any deck serving the main exit door; decks with attached roofs; decks/porches 200 sq ft or larger; any deck or porch in the front yard.
- Code reference
- Fences over 7 ft tall; retaining walls over 48 inches (measured from bottom of footing; engineering required).
- Code reference
- Room additions; attached/detached garages; accessory buildings larger than 200 sq ft.
- Code reference
- Detached decks less than 200 sq ft and less than 30 inches above grade that do not serve the main exit door.
- Code reference
- One-story detached accessory structures less than 200 sq ft.
- Code reference
- Fences 7 ft tall or less.
- Code reference
- Painting; minor roofing repair (one square or less); replacement of less than 100 sq ft of asphalt shingles.
Codes are amended regularly — verify current requirements with **The Building Inspection Division of the City of Thornton (Colorado) issues residential building permits.
Energy Code
Thornton energy code quick facts
- Code reference
- 2024 International Energy Conservation Code (IECC), including the Colorado Model Electric Ready and Solar Ready Code (with local amendments), effective July 1, 2025.
- Code reference
- This is adopted by reference in Thornton City Code Sec. 10-174 (with amendments in Sec. 10-175), along with the 2024 International Existing Building Code.§10-174
- Code reference
- Permit applications submitted on or after July 1, 2025, must comply.
- Code reference
- No specific local numeric amendments to prescriptive requirements (e.g., R-values, U-factors, or air-sealing thresholds for Climate Zone 5B) or details on remodels/additions beyond the base 2024 IECC + state model code are identified in available sources.
Codes are amended regularly — verify current requirements with **The Building Inspection Division of the City of Thornton (Colorado) issues residential building permits.
text
What demolition work covers
Demolition in the Denver metro ranges from selective interior tear-out to partial exterior removal and full structure demo with haul-off. Dust, noise, and utility disconnects are part of planning. A municipally licensed Denver general contractor coordinates demolition and related specialty trades for disconnects and abatement when required. Cost is project-specific and depends on volume, access, disposal, and hazardous-material handling.
text
Selective vs full demo
Selective demo protects adjacent finishes and structure. Full demo needs clear limits, safety fencing, and often more formal permitting and noticing.
text
What buyers should prepare
Demo limits, salvage preferences, building age, and whether hazardous materials testing has been done.
FAQ
Common questions
How much does Site visit and written estimate cost in Thornton?
$149.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles demolition permits and licensing?
A municipally licensed Denver general contractor coordinates the project and related specialty trades. Colorado has no statewide general contractor license.
What about lead paint in older buildings?
Disturbing paint in pre-1978 housing can trigger EPA RRP requirements. Testing and work practices should be planned before demo.
Can materials be salvaged?
Sometimes. Salvage goals should be written into the scope before tear-out starts.
What information helps define scope?
Photos or plans of what stays vs goes, building age, access constraints, and city or county.
Service Area
Serving Thornton and Adams County
We serve Thornton, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Thornton project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore