DESIGN · BUILD · AUTOMATE
CHERRY HILLS VILLAGE SERVICES
Structured Cabling in Cherry Hills Village
Structured Cabling — Cat6 Data Drops (Per Drop), $199 each
Licensed structured cabling services for Cherry Hills Village and Arapahoe County. Cat6 and Cat6A wiring for homes and offices.
What Cherry Hills Village requires
Code reference: ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes) §105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Cat6 and Cat6A wiring for homes and offices
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Structured Cabling — Cat6 Data Drops (Per Drop)
$199 each · $169 each for 4–9 · $139 each for 10+ · $129 minimum visit
New Cat6 runs from your network location to wall jacks, per drop, including termination, labeling, and certification testing, through accessible attic, crawlspace, or basement paths.
$100 deposit to book, the rest when the work is done · morning (8–12) or afternoon (12–4)
What's included
New Cat6 runs from your network location to wall jacks, per drop, including termination, labeling, and certification testing, through accessible attic, crawlspace, or basement paths. Finished multi-story fishes with no access, exterior conduit, and drywall repair are not included.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Structured Cabling Services in Cherry Hills Village, Colorado
Autotelic provides professional structured cabling services throughout Cherry Hills Village and the surrounding Arapahoe County area. Cat6 and Cat6A installation across the Denver metro — patch panels, PoE switching, racks, and every drop terminated, labeled, and tested. Homes and offices. Whether you're in Cherry Hills Village (affluent south Denver) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a Structured Cabling project
This service is a component of How a ADU project works in Cherry Hills Village · How a New build project works in Cherry Hills Village.
Permit Thresholds
Cherry Hills Village permit thresholds
- Code reference
- The Village adopted the 2024 International Codes (I-Codes) at the beginning of 2026, including the 2024 International Residential Code (IRC), and adheres to Chapter 18 of the Cherry Hills Village Municipal Code for building regulations.
- Code reference
- If an addition is more than 50% of the existing square footage, or if the aggregate floor area is demolished or reconstructed by more than 50%, or increased by 50% or more, the project is considered "redevelopment" and may have additional submittal and drainage requirements per Chapter 9 of the zoni
- Code reference
- Any electrical work on 400 amps (320 continuous) or greater requires a separate plan review.
- Impervious Surface
- If more than 2,500 square feet of impervious surface is added cumulatively (e.g., house addition, driveway, patio), a Phase III Drainage Plan is required.
- Code Reference
- Cherry Hills Village Municipal Code, Chapter 18, and the adopted 2024 International Residential Code.
- Code reference
- ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes)§105.2
- Code reference
- One-story detached, prefabricated storage sheds that do not exceed 120 square feet.
- Code Reference
- Cherry Hills Village Municipal Code, Section 105.2, referencing adopted I-Codes.§105.2
Codes are amended regularly — verify current requirements with **The City of Cherry Hills Village (specifically its Building Division under Community Development) issues residential building permits.
text
What structured cabling covers
Structured cabling in the Denver metro typically includes Category 6 or 6A homeruns, jacks, patch panels, racks or wall-mount cabinets, and labeling. PoE often feeds access points and cameras from the same closet. This is copper premises cabling, not outdoor fiber or street ROW work. A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Cost is project-specific and depends on drop count, pathway, and whether a rack circuit is new.
text
Permits and who coordinates the work
Low-voltage pulls alone may not need a building permit; new circuits and hardwired racks typically do. Colorado DORA regulates electrical licensing. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for structured-cabling scopes.
text
What buyers should prepare
Drop count and locations, PoE device list, preferred closet or rack location, and photos of existing pathways.
FAQ
Common questions
How much does Structured Cabling — Cat6 Data Drops (Per Drop) cost in Cherry Hills Village?
$199 each · $169 each for 4–9 · $139 each for 10+ · $129 minimum visit.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay the $100 deposit. We confirm within 24 hours or refund you in full.
What's not included?
Finished multi-story fishes with no access, exterior conduit, and drywall repair are not included.
Who handles structured cabling permits and licensing?
A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.
Cat6 or Cat6A?
Cat6 covers most 1 Gbps homeruns. Cat6A is the usual choice when 10 Gbps or higher PoE heat is expected. Match the jacks and patch panel to the cable.
Is this the same as fiber?
No. Fiber is a separate premises or ROW path. Structured cabling here means copper homeruns to a patch panel.
What information helps define scope?
Drop count, PoE devices, closet location, and city or county.
Service Area
Serving Cherry Hills Village and Arapahoe County
We serve Cherry Hills Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Cherry Hills Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore