autotelic.build(720) 287-7958

DESIGN · BUILD · AUTOMATE

LAKEWOOD SERVICES

Smart Home Automation in Lakewood

Licensed smart home automation services for Lakewood and Jefferson County. Whole-home intelligence.

  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Smart Home Automation

Whole-home intelligence

FREE PLANNING TOOLS

Both tools are free and take a couple of minutes — start in either one.

Local Service

Smart Home Automation Services in Lakewood, Colorado

Autotelic provides professional smart home automation services throughout Lakewood and the surrounding Jefferson County area. Complete smart home systems with Crestron, Lutron, Savant, and Control4 — lighting, shades, climate, security, and AV under one interface. Whether you're in Lakewood (Jefferson County's largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.

Permits & Licensing

Permits in Lakewood

Lakewood building and construction permits are issued through the Public Works Department, and contractors must be registered with the city and hold a Lakewood contractor account before pulling permits. Permitting and inspections run through the city's eTRAKiT online system. Authority: City of Lakewood — Public Works Department (Building and Construction Permits).

Permit Thresholds

Lakewood permit thresholds

Code reference
Permits are generally required for residential remodel work in Lakewood, Colorado, unless the work falls under specific exemptions listed in the city’s adopted Building Code (referenced as § 105.2 in secondary sources and detailed in the official exemptions list). There are no broad valuation th§ 105.2
Code reference
One-story detached accessory buildings (tool/storage sheds, pergolas, playhouses, etc.) ≤ 120 sq ft (commercial) or ≤ 200 sq ft (residential), with additional placement rules.
Code reference
Moveable cases, cabinets, counters, and partitions ≤ 5’9” high.
Code reference
Retaining walls ≤ 30 inches high (unless supporting surcharge or impounding flammables).
Code reference
Private walks/driveways ≤ 30 inches above grade (not over basement/story below, not part of accessible route).
Code reference
Prefabricated non-heated swimming pools < 24 inches deep without circulation system.
Code reference
Window awnings on Group R-3 occupancies projecting ≤ 54” from exterior wall.
Code reference
Roof covering repairs < 100 sq ft (unless removing mechanical/electrical equipment).

Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).

Zoning & Dimensional Standards

Setback & dimensional standards in Lakewood

Zone-district dimensional standards for Lakewood, quoted verbatim from the Lakewood Zoning Code (2025). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.

C-Lsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)45 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) C-L setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

C-Rsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)90 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) C-R setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

LIsetback & dimensional standards
StandardRequirement
Front Setback (min)15 ft.
Side Setback (min)5 ft.
Rear Setback (min)5 ft.
Building Height (max)60 ft.
Open Space (min %)25%

Lakewood Zoning Code (2025) LI setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Asetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)10 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size7,000 sq. ft.
Minimum Lot Width75 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-A setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Bsetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size5,000 sq. ft.
Minimum Lot Width60 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-B setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-Csetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)35 ft.
Minimum Lot Size1,500 sq. ft.
Minimum Lot Width25 ft.
Open Space (min %)50%

Lakewood Zoning Code (2025) R-L-C setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-L-MHsetback & dimensional standards
StandardRequirement
Front Setback (min)25 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)20 ft.
Rear Setback (min)15 ft.
Building Height (max)25 ft.
Minimum Lot Width35 (SW) 40 (DW)
Open Space (min %)25%

Lakewood Zoning Code (2025) R-L-MH setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

R-Msetback & dimensional standards
StandardRequirement
Front Setback (min)10 ft.
Side Setback (min)5 ft.
Non-Primary Frontage Front Setback (min)10 ft.
Rear Setback (min)15 ft.
Building Height (max)45 ft.
Minimum Lot Width18 ft.
Open Space (min %)30%

Lakewood Zoning Code (2025) R-M setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code

Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.

text

What smart-home work covers

Smart-home projects in the Denver metro typically include lighting control (line-voltage dimmers, 0-10 V, occupancy or vacancy sensors, scene keypads), thermostats, motorized shades, contact sensors, and a local hub or controller using protocols such as Matter or Thread. Low-voltage sensors are different from line-voltage lighting circuits. A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Cost is project-specific and depends on room count, existing wiring, and whether new circuits are needed.

text

Lighting circuits and energy code

Replacing lighting or adding controls on 120 V circuits is electrical work. City and County of Denver Community Planning and Development reviews commercial and multifamily interior lighting replacements for energy-code controls. Residential alterations that add new lighting systems follow Denver Energy Code lighting provisions (DEC R404.1 when those systems are in the alteration). Minor electrical work may qualify for a quick permit.

text

Permits and who coordinates the work

CPD electrical permits typically apply when devices are swapped on lighting circuits, new circuits are added, or line-voltage load controllers are installed. Colorado DORA regulates electrical licensing. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for smart-home scopes.

text

What buyers should prepare

Rooms in scope, photos of existing switches, whether a dedicated controller is desired, and any shade or thermostat goals.

FAQ

Common questions

Do smart switches need a Denver permit?

Often yes when they replace devices on lighting circuits. Plug-in hubs alone usually do not. Confirm with CPD if the work is mixed.

Who handles smart-home permits and licensing?

A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.

Wi-Fi bulbs or a wired control system?

Wi-Fi bulbs avoid new wiring but depend on the network. Wired dimmers, 0-10 V, and a local hub are more durable for whole-house lighting.

Do occupancy sensors count as energy-code controls?

They are a common control type. Commercial lighting replacements are reviewed against energy-code control requirements.

What information helps define scope?

Room list, switch photos, shade motors yes or no, and city or county.

Service Area

Serving Lakewood and Jefferson County

We serve Lakewood, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lakewood project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

TRUSTED TO BUILD FOR

  • Punch Bowl SocialFirst four locations
  • Spectrum RetirementSenior living communities
  • Denver HighlandsFirst modular custom home

Free Estimate

Get a free smart home automation estimate in Lakewood

Tell us about your Lakewood project — we respond fast, and estimates are always free.

Name, phone, and email required.