DESIGN · BUILD · AUTOMATE
GREENWOOD VILLAGE SERVICES
Interior Design in Greenwood Village
Whole-Home Renovation Design Consultation, $350
See all 2 jobsLicensed interior design services for Greenwood Village and Arapahoe County. Spaces that feel intentional.
What Greenwood Village requires
Code reference: The city operates under the 2018 International Residential Code (IRC) and other 2018 International Codes, along with the 2023 National Electrical Code (NEC) standards.
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Spaces that feel intentional
Jobs you can book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Whole-Home Renovation Design Consultation
A two-hour walkthrough of the full house to prioritize scope, phasing, and budget across rooms.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
A two-hour walkthrough of the full house to prioritize scope, phasing, and budget across rooms. You receive a written room-by-room scope outline with cost ranges.
3D Concept Package — Single Room
On-site measure of one room followed by a 3D concept model with two layout options and rendered views.
$275 deposit to book, the rest when the work is done · morning (8–12) or afternoon (12–4)
What's included
On-site measure of one room followed by a 3D concept model with two layout options and rendered views. You receive the renderings plus a dimensioned concept plan.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Interior Design Services in Greenwood Village, Colorado
Autotelic provides professional interior design services throughout Greenwood Village and the surrounding Arapahoe County area. Full-service interior design including space planning, material selection, furniture procurement, and install supervision. Whether you're in Greenwood Village (Denver Tech Center) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a Interior Design project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Greenwood Village permit thresholds
- Code reference
- The city operates under the 2018 International Residential Code (IRC) and other 2018 International Codes, along with the 2023 National Electrical Code (NEC) standards.
- Code reference
- Concrete or asphalt work exceeding 100 square feet
- Code reference
- Re-roofs/Repairs involving the removal of 25% or more of the decking
- Code reference
- Landscaping or grading that is more than 10 feet from a property line, not within a drainage easement, involves less than 500 square feet of disturbed area, and less than 10 cubic yards of earthwork
- Code reference
- Re-roofing that only involves laying new shingles and patching unsound decking (less than 25% of decking removal)
- Snow loads
- 30 lbs.
- Ultimate wind speed
- 120 mph (Basic Design) and nominal: 93 mph (allowable stress design)
- Frost depth
- 36 inches
Codes are amended regularly — verify current requirements with **The City of Greenwood Village (specifically its Community Development Department / Building Division) issues residential building permits.
text
What interior design covers here
Interior design for Denver-metro homes and light commercial spaces typically includes space planning, finish selection, fixture and furnishing direction, and coordination documents that construction teams can build from. Projects often span kitchens, baths, basements, living areas, and office tenant interiors. A municipally licensed Denver general contractor coordinates construction that follows design intent and brings in licensed specialty trades when plumbing, electrical, or mechanical work is required. Cost is project-specific and depends on scope, finish level, and whether construction is included.
text
What buyers should lock early
Priorities for layout, storage, lighting, and durability; must-keep items; and whether the project is design-only or design through construction. Finish lead times and appliance models should be decided before ordering long-lead cabinetry or millwork.
FAQ
Common questions
How much does Whole-Home Renovation Design Consultation cost in Greenwood Village?
$350.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles permits and licensing when design becomes a remodel?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for regulated work. Colorado has no statewide general contractor license.
Can design and construction be under one team?
Yes. Design-build coordination keeps finish decisions aligned with rough-in, inspections, and schedule. Confirm who holds each contract and who pulls permits.
What should be decided before ordering finishes?
Final layout, appliance models, lighting plan, and primary finish materials. Late changes after orders often extend lead times.
What information helps define an accurate interior design scope?
Photos or plans, rooms in scope, must-keep items, functional priorities, and whether construction permitting will be needed in your city or county.
Service Area
Serving Greenwood Village and Arapahoe County
We serve Greenwood Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Greenwood Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore