DESIGN · BUILD · AUTOMATE
LAKEWOOD SERVICES
Interior Design in Lakewood
Licensed interior design services for Lakewood and Jefferson County. Spaces that feel intentional.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Spaces that feel intentional
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Interior Design Services in Lakewood, Colorado
Autotelic provides professional interior design services throughout Lakewood and the surrounding Jefferson County area. Full-service interior design including space planning, material selection, furniture procurement, and install supervision. Whether you're in Lakewood (Jefferson County's largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permits & Licensing
Permits in Lakewood
Lakewood building and construction permits are issued through the Public Works Department, and contractors must be registered with the city and hold a Lakewood contractor account before pulling permits. Permitting and inspections run through the city's eTRAKiT online system. Authority: City of Lakewood — Public Works Department (Building and Construction Permits).
Permit Thresholds
Lakewood permit thresholds
- Code reference
- Permits are generally required for residential remodel work in Lakewood, Colorado, unless the work falls under specific exemptions listed in the city’s adopted Building Code (referenced as § 105.2 in secondary sources and detailed in the official exemptions list). There are no broad valuation th§ 105.2
- Code reference
- One-story detached accessory buildings (tool/storage sheds, pergolas, playhouses, etc.) ≤ 120 sq ft (commercial) or ≤ 200 sq ft (residential), with additional placement rules.
- Code reference
- Moveable cases, cabinets, counters, and partitions ≤ 5’9” high.
- Code reference
- Retaining walls ≤ 30 inches high (unless supporting surcharge or impounding flammables).
- Code reference
- Private walks/driveways ≤ 30 inches above grade (not over basement/story below, not part of accessible route).
- Code reference
- Prefabricated non-heated swimming pools < 24 inches deep without circulation system.
- Code reference
- Window awnings on Group R-3 occupancies projecting ≤ 54” from exterior wall.
- Code reference
- Roof covering repairs < 100 sq ft (unless removing mechanical/electrical equipment).
Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).
Zoning & Dimensional Standards
Setback & dimensional standards in Lakewood
Zone-district dimensional standards for Lakewood, quoted verbatim from the Lakewood Zoning Code (2025). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
C-Lsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 15 ft. |
| Side Setback (min) | 5 ft. |
| Rear Setback (min) | 5 ft. |
| Building Height (max) | 45 ft. |
| Open Space (min %) | 25% |
Lakewood Zoning Code (2025) C-L setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
C-Rsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 15 ft. |
| Side Setback (min) | 5 ft. |
| Rear Setback (min) | 5 ft. |
| Building Height (max) | 90 ft. |
| Open Space (min %) | 25% |
Lakewood Zoning Code (2025) C-R setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
LIsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 15 ft. |
| Side Setback (min) | 5 ft. |
| Rear Setback (min) | 5 ft. |
| Building Height (max) | 60 ft. |
| Open Space (min %) | 25% |
Lakewood Zoning Code (2025) LI setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
R-L-Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25 ft. |
| Side Setback (min) | 10 ft. |
| Non-Primary Frontage Front Setback (min) | 20 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 35 ft. |
| Minimum Lot Size | 7,000 sq. ft. |
| Minimum Lot Width | 75 ft. |
| Open Space (min %) | 50% |
Lakewood Zoning Code (2025) R-L-A setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
R-L-Bsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25 ft. |
| Side Setback (min) | 5 ft. |
| Non-Primary Frontage Front Setback (min) | 20 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 35 ft. |
| Minimum Lot Size | 5,000 sq. ft. |
| Minimum Lot Width | 60 ft. |
| Open Space (min %) | 50% |
Lakewood Zoning Code (2025) R-L-B setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
R-L-Csetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25 ft. |
| Side Setback (min) | 5 ft. |
| Non-Primary Frontage Front Setback (min) | 20 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 35 ft. |
| Minimum Lot Size | 1,500 sq. ft. |
| Minimum Lot Width | 25 ft. |
| Open Space (min %) | 50% |
Lakewood Zoning Code (2025) R-L-C setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
R-L-MHsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25 ft. |
| Side Setback (min) | 5 ft. |
| Non-Primary Frontage Front Setback (min) | 20 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 25 ft. |
| Minimum Lot Width | 35 (SW) 40 (DW) |
| Open Space (min %) | 25% |
Lakewood Zoning Code (2025) R-L-MH setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
R-Msetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 10 ft. |
| Side Setback (min) | 5 ft. |
| Non-Primary Frontage Front Setback (min) | 10 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 45 ft. |
| Minimum Lot Width | 18 ft. |
| Open Space (min %) | 30% |
Lakewood Zoning Code (2025) R-M setback standards (Article 5 Tables 4 & 8 Dimensional Standards (§17.5)) — effective 2025-03-24 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What interior design covers here
Interior design for Denver-metro homes and light commercial spaces typically includes space planning, finish selection, fixture and furnishing direction, and coordination documents that construction teams can build from. Projects often span kitchens, baths, basements, living areas, and office tenant interiors. A municipally licensed Denver general contractor coordinates construction that follows design intent and brings in licensed specialty trades when plumbing, electrical, or mechanical work is required. Cost is project-specific and depends on scope, finish level, and whether construction is included.
text
Design decisions that affect permits
Moving walls, relocating plumbing fixtures, adding circuits, or changing mechanical routes turns a finish refresh into permitted construction. Cosmetic finish changes that do not alter structure or building systems are less likely to need a building permit, but the construction scope—not the design drawings alone—determines CPD requirements inside Denver.
text
Permits and who coordinates the work
Design services themselves are not a City and County of Denver building permit. When construction proceeds, Community Planning and Development reviews and inspects regulated work through e-permits. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for the build package tied to the design.
text
What buyers should lock early
Priorities for layout, storage, lighting, and durability; must-keep items; and whether the project is design-only or design through construction. Finish lead times and appliance models should be decided before ordering long-lead cabinetry or millwork.
FAQ
Common questions
Does hiring an interior designer require a Denver building permit?
No. Permits apply to construction work that alters structure or building systems. CPD is the building-permit authority inside Denver when that construction begins.
Who handles permits and licensing when design becomes a remodel?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for regulated work. Colorado has no statewide general contractor license.
Can design and construction be under one team?
Yes. Design-build coordination keeps finish decisions aligned with rough-in, inspections, and schedule. Confirm who holds each contract and who pulls permits.
What should be decided before ordering finishes?
Final layout, appliance models, lighting plan, and primary finish materials. Late changes after orders often extend lead times.
What information helps define an accurate interior design scope?
Photos or plans, rooms in scope, must-keep items, functional priorities, and whether construction permitting will be needed in your city or county.
Service Area
Serving Lakewood and Jefferson County
We serve Lakewood, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lakewood project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore