DESIGN · BUILD · AUTOMATE
PARKER SERVICES
Custom Modular Home in Parker
Licensed custom modular home services for Parker and Douglas County. Factory precision. Custom design. On-site assembly..
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Factory precision. Custom design. On-site assembly.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Custom Modular Home Services in Parker, Colorado
Autotelic provides professional custom modular home services throughout Parker and the surrounding Douglas County area. Licensed modular home installation across the Denver metro — factory-precision construction with on-site assembly, Tesla Solar Roof, and smart home automation. Whether you're in Parker (southeast Denver metro) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Parker permit thresholds
- Key official source
- Parker Administrative Code, Section 301 (Permits and Inspections), specifically 301.1 (Permits Required) and 301.2 / 301.2.1 (Exempted Work).Section 301
- Code reference
- Examples of residential remodel/alteration work typically requiring permits (per Town guidance, cross-referenced to Section 301):Section 301
- Code reference
- Exempt work (per Parker Administrative Code Section 301.2.1 for building permits; exemptions do not authorize work violating other codes/ordinances):Section 301.2.1
- Code reference
- One-story detached accessory buildings (tool/storage sheds, playhouses, similar uses) with floor area ≤ 200 sq ft and ceilings ≤ 10 ft.
- Code reference
- Fences not over 6 ft high.
- Code reference
- Movable cases, counters, and partitions not over 5 ft 9 in high.
- Code reference
- Decks (any height/size), retaining/block walls over 48 inches, and related work are explicitly noted as requiring permits.
- Code reference
- A 2.5% convenience fee applies to credit card transactions.
Codes are amended regularly — verify current requirements with **Town of Parker Building Division (within incorporated Parker limits).
Energy Code
Parker energy code quick facts
- Code reference
- 2024 International Energy Conservation Code (IECC), effective June 30, 2026, as adopted by the Town of Parker (no specific local energy code amendments noted beyond the base 2024 IECC and the separately listed 2025 Colorado Model Electric Ready and Solar Ready Code).
- Code reference
- Parker (Douglas County) is in IECC Climate Zone 5B.
- Code reference
- The 2024 IECC applies to additions and remodels/alterations (with the added or modified portions generally required to meet current prescriptive or performance requirements; unmodified portions are typically not required to be upgraded).
- Code reference
- Key prescriptive requirements (from the adopted 2024 IECC, relevant to remodels/additions in CZ 5; cite the base code sections as no local amendments override them):
- Code reference
- Vertical fenestration U-factor ≤ 0.28 (Table R402.1.2; 2024 IECC R402.1.2).
- Code reference
- Skylight U-factor ≤ 0.50 (Table R402.1.2; 2024 IECC R402.1.2).
- Code reference
- Air leakage ≤ 3 ACH50 (tested and verified; R402.4.1.2 / R402.5.1.2; applies to CZ 3–5, including 5B; 2024 IECC).
- Code reference
- Ceiling/attic insulation R-49 (prescriptive R-value path in Table R402.1.3 or equivalent U-factor path; 2024 IECC, reflecting 2024 updates from prior editions).
Codes are amended regularly — verify current requirements with **Town of Parker Building Division (within incorporated Parker limits).
text
What this covers
Factory-built modules set on a Denver-area foundation with site-built connections. Transport, crane, and weather window are part of the plan; finish and utility tie-in happen on site.
text
How the work is coordinated
Permits cover both the factory package and the site work through the local building department. Denver-metro work is permitted locally. Colorado has no statewide general-contractor license. Cities and counties license general contractors. DORA licenses electrical and plumbing (and similar regulated trades), not general contractors. Autotelic is a municipally licensed Denver general contractor that coordinates licensed specialty trades. Denver building permits run through Community Planning and Development (CPD). Costs are project-specific; no dollar figures.
FAQ
Common questions
Who handles the custom modular home permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades. Colorado has no statewide general-contractor license; cities and counties license general contractors. DORA licenses electrical and plumbing, not general contractors.
What is typically in scope for custom modular home in Denver?
Factory-built modules set on a Denver-area foundation with site-built connections.
When do you need drawings or a permit?
Anything that changes structure, occupancy, or regulated electrical or plumbing usually needs a local permit. Denver building permits are reviewed by Community Planning and Development. Confirm the exact trigger with CPD for the address.
Service Area
Serving Parker and Douglas County
We serve Parker, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Parker project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Let's design your perfect Custom Modular Home together
Get a personalized estimate in about 2 minutes — no pressure, no obligation.
How This Works (2 minutes)
- 1Tell us about your project (30 seconds)
- 2Answer a few quick questions for an accurate estimate (60 seconds)
- 3Get your personalized estimate instantly (30 seconds)
No pressure. No obligation. No spam calls. If we're not the right fit, we'll tell you — and even recommend someone who is.
Explore
Also serving
Explore