DESIGN · BUILD · AUTOMATE
AURORA SERVICES
Security Camera Systems — PoE in Aurora
Licensed security camera systems — poe services for Aurora and Arapahoe/Adams County. Commercial-grade surveillance for any property.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Commercial-grade surveillance for any property
EVERY PROJECT STARTS WITH DESIGN
Local Service
Security Camera Systems — PoE Services in Aurora, Colorado
Autotelic provides professional security camera systems — poe services throughout Aurora and the surrounding Arapahoe/Adams County area. PoE security camera installation across the Denver metro — 4K IP cameras, NVR recording, structured wiring, remote app access, and AI analytics. Whether you're in Aurora (Colorado's third-largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permits & Licensing
Permits in Aurora
Aurora building permits are issued by the Building Division's Permit Center, which also handles public improvement, sign, and lawn and irrigation permits. Contractor licensing is a City of Aurora requirement, and applications go through the Aurora4Biz.org online portal. Authority: City of Aurora — Building Division (Permit Center).
Permit Thresholds
Aurora permit thresholds
- Code reference
- Permits are generally required for residential remodel work in Aurora, Colorado, per the adopted building codes (primarily the 2021 International Residential Code (IRC) with local amendments in Aurora City Code Chapter 22, Article V), unless specifically exempt.
- Aurora City Code § 22-184 (amending IRC R105.2) exempts only
- one-story detached accessory residential storage sheds, playhouses, or shade structures ≤120 sq ft, not attached to the residence, and not used for vehicle storage.§ 22-184
- Code reference
- Aurora City Code § 22-135 (amending IBC 105.2) has similar limited exemptions for certain small accessory structures, fences ≤7 ft high (plus all chain-link fences), and antennae/towers ≤25 ft high.§ 22-135
- Structural triggers
- Any structural alteration, addition, or work affecting load-bearing elements generally requires a permit under the adopted IRC (see R105 and amendments).
- Use tax (construction materials use tax)
- Prior to permit issuance, a deposit is required based on 3.75% (three and three-fourths percent) applied to 50% of the total estimated cost of the building/construction/reconstruction/alteration/expansion/modification/improvement (or 100% of the total estimated cost of construction materials/
- Code reference
- This is per Aurora City Code § 130-61.§ 130-61.
- Code reference
- All information is based on the Aurora Municipal Code (Chapter 22) and official city resources.
Codes are amended regularly — verify current requirements with City of Aurora — Building Division (Permit Center).
Zoning & Dimensional Standards
Setback & dimensional standards in Aurora
Zone-district dimensional standards for Aurora, quoted verbatim from the Aurora Unified Development Ordinance. Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
I-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Rear Setback (min) | 5 ft. |
Aurora Unified Development Ordinance I-1 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
I-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Rear Setback (min) | 5 ft. |
Aurora Unified Development Ordinance I-2 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 6,000 sf. [1] |
| Lot Frontage, Single-Family Detached (min) | Subarea A: 50 ft. Subarea B: 60 ft. |
| Front Setback (min) | 25 ft. [4] |
| Side Interior Setback (min) | 5 ft. [6] |
| Side Setback Abutting Local Street (min) | 12.5 ft. |
| Rear Setback (min) | 20 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-1 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 6,000 sf. [1] |
| Lot Frontage, Single-Family Detached (min) | Subarea A: 50 ft. Subarea B: 60 ft. |
| Front Setback (min) | 20 ft. [4] |
| Side Interior Setback (min) | 5 ft.[6] |
| Side Setback Abutting Local Street (min) | 10 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-2 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-3setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 5,000 sf. |
| Lot Frontage, Single-Family Detached (min) | 50 ft. |
| Front Setback (min) | 15 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 10 ft. |
| Rear Setback (min) | 10 ft. |
| Building Height (max) | 45 ft.[7] |
Aurora Unified Development Ordinance R-3 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-4setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 5,000 sf. |
| Lot Frontage, Single-Family Detached (min) | 50 ft. |
| Front Setback (min) | 12 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 7.5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Height (max) | 65 ft.[8] |
Aurora Unified Development Ordinance R-4 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-MHsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | [2] |
| Front Setback (min) | 15 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 15 ft. |
| Rear Setback (min) | 8 ft. |
| Building Height (max) | 20 ft.[9] |
Aurora Unified Development Ordinance R-MH setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-Rsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 43,560 sf. |
| Lot Frontage, Single-Family Detached (min) | 120 ft. |
| Front Setback (min) | 30 ft. |
| Side Interior Setback (min) | 10 ft. |
| Side Setback Abutting Local Street (min) | 25 ft. |
| Rear Setback (min) | 25 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-R setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What a PoE camera project usually includes
A Power over Ethernet (PoE) security camera system delivers both power and data over a single Ethernet cable. Typical scope starts with a property assessment: entry points, high-traffic zones, sightlines, lighting conditions, and indoor versus outdoor coverage needs. From there, the design selects camera form factors (dome, bullet, or PTZ), resolution targets (commonly 4MP to 4K/8MP), an NVR for local recording, and PoE switches or injectors matched to camera power draw. Installation covers secure mounting, structured Cat5e or Cat6 cable runs, weatherproofing for exterior paths, NVR and network configuration, feature setup such as motion detection or AI analytics, remote viewing access, system testing, and an owner walkthrough on day-to-day use.
text
Equipment classes, protocols, and integration points
Core components are IP cameras, Ethernet cabling, PoE power delivery, and recording/storage. Cameras are chosen for field of view, low-light performance, night vision needs, and physical durability. Cabling is typically Cat5e or Cat6; exterior runs use outdoor-rated cable, conduit, weatherproof couplers, grommets, and junction boxes where exposure or tampering is a concern. PoE standards are matched to load: IEEE 802.3af (up to 15.4W), 802.3at/PoE+ (up to 30W), or 802.3bt for higher-draw devices. Many modern cameras are designed around PoE+. Recording is commonly handled by a local NVR—often with built-in PoE ports—supporting continuous or scheduled recording without depending on cloud connectivity. Integration points usually include the LAN, PoE switch or NVR PoE ports, router/firewall rules for remote access, mobile or desktop viewing clients, and optional hybrid cloud backup if the owner wants off-site copies in addition to local storage.
text
Why wired PoE is used instead of Wi-Fi cameras
PoE is preferred for permanent installations because each camera has dedicated copper bandwidth and continuous power. That reduces dropouts from wireless interference, weak signal paths, and battery or plug-in power failures. Single-cable topology also simplifies pathway planning: one run carries both power and video back to the switch or NVR. Local NVR storage supports 24/7 recording without a recurring cloud subscription and keeps footage on-site. Buyers still need clean cable routes, adequate PoE budget per port and per switch, and correct IP addressing so cameras remain reachable after power cycles or network changes.
text
Denver permits, electrical coordination, and code context
In Denver, Community Planning and Development (CPD) issues permits and performs inspections under the Denver Building and Fire Code, which adopts model codes such as the IBC and NEC with local amendments. Pure low-voltage Ethernet pathways are not always treated the same as branch-circuit electrical work, but permits are commonly in play when the job penetrates fire-rated assemblies, adds or modifies outlets/circuits for an NVR or PoE rack, installs conduit that affects structure, or otherwise alters regulated building systems. Commercial scopes can carry tighter pathway, labeling, and separation expectations than simple residential add-ons. Autotelic is a municipally licensed Denver general contractor and coordinates licensed specialty trades for electrical or other regulated portions of the work. Exact permit needs should be confirmed against the final design and occupancy type before rough-in.
text
Privacy, audio, and cybersecurity considerations in Colorado
Camera placement should respect areas with a reasonable expectation of privacy. Recording in bathrooms, bedrooms, and similar private spaces is not appropriate. Colorado is a one-party consent state for audio recording, but professional installs often disable audio by default—especially in workplaces—to reduce consent and eavesdropping risk. Video in areas open to public view is generally treated differently from audio capture, but owners should still define notice practices for staff, tenants, or visitors where appropriate. Because these are IP systems, cybersecurity matters as much as mounting hardware: change default credentials, segment camera VLANs where practical, limit remote exposure, keep firmware current, and control who can export or delete footage.
text
What buyers should compare before approving a design
Evaluate resolution and optics together, not megapixels alone—sensor and lens quality drive identifiable detail and low-light performance. Confirm the PoE standard and switch power budget against every camera’s peak draw. Decide storage model up front: local NVR, cloud, or hybrid, including retention days and whether internet outages can interrupt recording. For exterior cameras, review IP weather ratings, mount strength, cable protection, and tamper resistance. Commercial and public-sector buyers may also need NDAA-compliant equipment sourcing. Ask how service is handled after turnover: who diagnoses a dead PoE port, failed drive, or offline camera, and how software updates are managed. Cost is project-specific and driven by camera count, pathway difficulty, storage retention, analytics features, and any electrical or permit scope—not a single flat package price.
FAQ
Common questions
What does PoE mean for a security camera system?
PoE means the camera receives power and network data over one Ethernet cable, usually Cat5e or Cat6, from a PoE switch, injector, or NVR with PoE ports. That removes separate camera power supplies at each mount location and supports a cleaner permanent install than Wi-Fi cameras.
Do I need an NVR if the cameras are on my network?
Most property owners still want an NVR or equivalent local recorder for continuous retention, faster playback, and recording that continues when internet service is down. Cloud-only storage is optional and usually adds subscription cost and upstream bandwidth dependence.
Which PoE standard should the switch support?
Match the switch or injector to camera power requirements. 802.3af covers lower-draw devices up to 15.4W, 802.3at (PoE+) supports up to 30W and is common for modern cameras, and 802.3bt is used for higher-power equipment. The design should check both per-port power and total switch budget.
Who handles the electrical permits and licensing on a Denver PoE camera project?
A municipally licensed Denver general contractor coordinates the project and brings in licensed specialty trades when the scope includes regulated electrical work, circuit changes, or other permit-triggering items. Denver CPD permit needs depend on whether the install alters electrical systems, fire-rated assemblies, or other controlled building elements.
Can outdoor cameras run on standard Ethernet cable?
Outdoor pathways should use outdoor-rated Ethernet cable and protected terminations. Exposed runs are commonly placed in conduit, with weatherproof couplers, grommets, and junction boxes at penetrations so moisture and UV do not degrade connections.
Should audio recording be enabled?
Often no, unless there is a clear operational need and a consent plan. Colorado’s one-party consent rule applies to audio, and many professional office and multi-user environments leave audio disabled to avoid privacy issues. Video coverage should still avoid private areas such as bathrooms and bedrooms.
Service Area
Serving Aurora and Arapahoe/Adams County
We serve Aurora, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Aurora project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore