DESIGN · BUILD · AUTOMATE
ARVADA SERVICES
Interior Painting in Arvada
Paint Accent Wall, $245
See all 9 jobsLicensed interior painting services for Arvada and Jefferson/Adams County. Color and protection in every coat.
What Arvada requires
Code reference: Arvada requires building permits for most residential construction, alteration, repair, enlargement, replacement, equipment installation, use/occupancy changes, and demolition work, per the City’s Building Permits page and Chapter 18 of the Arvada City Code (which adopts the 2024 International Res Ord. No. 4921
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Color and protection in every coat
Jobs you can book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Fixed-price jobs
Paint Accent Wall
Paint one accent wall up to 12 ft wide x 9 ft tall: crisp taped edges at corners and ceiling, two coats in one color, masking included.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint one accent wall up to 12 ft wide x 9 ft tall: crisp taped edges at corners and ceiling, two coats in one color, masking included. Paint included; on-site time includes dry time between coats. Excludes deep reds/oranges needing a third coat or tinted primer (small upcharge), specialty finishes (limewash, murals), walls over the size cap, and adjacent wall painting.
Paint One Room Ceiling
Paint one room ceiling up to 12x14 ft, height to 10 ft: mask walls/floor/fixtures, cut in, two coats flat ceiling white.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint one room ceiling up to 12x14 ft, height to 10 ft: mask walls/floor/fixtures, cut in, two coats flat ceiling white. Paint included. Excludes popcorn/heavily textured ceilings that flake when rolled (see popcorn removal SKU), vaulted ceilings over 10 ft, water-stain sealing beyond one spot-prime, and wall painting.
Paint One Room, Walls Only - Large
Paint the walls of one large room up to 16x20 ft, ceilings to 10 ft (roughly 720 sq ft of wall): prep, cut in, two coats quality interior paint in one color, masking included.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint the walls of one large room up to 16x20 ft, ceilings to 10 ft (roughly 720 sq ft of wall): prep, cut in, two coats quality interior paint in one color, masking included. Paint included. May be split into a TWO-VISIT job for coat dry time; duration shown is total on-site minutes. Excludes ceilings, trim, doors, two-story great-room walls, wallpaper removal, and drywall repair beyond minor filling.
Paint One Room, Walls Only - Medium
Paint the walls of one room up to 12x14 ft, 9 ft ceilings (roughly 470 sq ft of wall): light prep, cut in, two coats quality interior paint in one color, masking included.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint the walls of one room up to 12x14 ft, 9 ft ceilings (roughly 470 sq ft of wall): light prep, cut in, two coats quality interior paint in one color, masking included. Paint included. Excludes ceilings, trim, doors, closet interiors, vaulted walls over 10 ft, wallpaper removal, primer coat for drastic color changes (small upcharge), and drywall repair beyond minor filling.
Paint One Room, Walls Only - Small
Paint the walls of one room up to 10x10 ft, 9 ft ceilings (roughly 320 sq ft of wall): light prep (nail holes, minor dings), cut in, two coats quality interior paint in one color, floors and fixtures masked.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint the walls of one room up to 10x10 ft, 9 ft ceilings (roughly 320 sq ft of wall): light prep (nail holes, minor dings), cut in, two coats quality interior paint in one color, floors and fixtures masked. Paint included (standard sheens; customer picks color). Excludes ceilings, trim, doors, closets interiors, wallpaper removal, drastic color changes needing primer coat (small upcharge), and drywall repairs beyond minor filling.
Wallpaper Single Wall Hang (Customer-Supplied Paper)
Hang customer-supplied wallpaper on one wall up to 12 ft wide x 9 ft tall: wall prep (clean, minor fill, sizing/primer as needed), pattern-matched hang, trimmed edges, seams rolled.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Hang customer-supplied wallpaper on one wall up to 12 ft wide x 9 ft tall: wall prep (clean, minor fill, sizing/primer as needed), pattern-matched hang, trimmed edges, seams rolled. Works with pasted, unpasted, and quality peel-and-stick papers. Customer must supply enough paper for the wall PLUS one extra roll for pattern match. Excludes paper material, wallpaper removal of existing paper (quoted separately), heavily textured walls requiring skim-coat first (see skim-coat SKU), and murals requiring exact centered layout beyond one focal alignment.
Priced per item
Paint Baseboard (Per Linear Foot)
$2.75 each · $2.25 each for 151+ · $89 minimum visit
Repaint existing baseboard: clean/scuff, caulk gaps at wall, tape floor line, two coats trim enamel.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Repaint existing baseboard: clean/scuff, caulk gaps at wall, tape floor line, two coats trim enamel. Paint included. Duration typical for ~120 lf. Excludes stain-grade-to-paint conversion (bonding primer upcharge), carpet-edge protection beyond taped shield (fresh carpet at customer's risk), baseboard replacement (see install SKU), and wall paint touch-ups.
Paint Interior Door and Jamb (Per Door)
$115 each · $95 each for 5+ · $89 minimum visit
Paint interior doors both faces plus jamb and casing edges: degloss/scuff, mask hardware, brush-and-roll or spray two coats enamel.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Paint interior doors both faces plus jamb and casing edges: degloss/scuff, mask hardware, brush-and-roll or spray two coats enamel. Paint included. TWO-VISIT job in most cases — first coats visit one, final coat after full dry on visit two; duration shown is total on-site minutes for a typical 3-door booking (add ~70 min per additional door). Excludes stain-to-paint conversions needing bonding primer on raw stain bleed (upcharge), French/panel-glass doors (masking upcharge), and hardware replacement.
Visit first, then quoted
Interior Painting Service Visit
$89 visit fee — credited toward the work
A painter walks the space, checks surface condition, and delivers a firm per-room or per-wall quote.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
A painter walks the space, checks surface condition, and delivers a firm per-room or per-wall quote. The $89 visit fee is credited toward your painting project.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Interior Painting Services in Arvada, Colorado
Autotelic provides professional interior painting services throughout Arvada and the surrounding Jefferson/Adams County area. Interior painting services across the Denver metro — walls, ceilings, trim, cabinets, and accent walls with thorough prep and premium paint products. Whether you're in Arvada (historic Olde Town and rapid growth) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a Interior Painting project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permits & Licensing
Permits in Arvada
Arvada building permits are issued by Building Services, and the city notes that unpermitted work can jeopardize a contractor's licensing as well as a property's resale value. Permit applications, inspection scheduling, and status checks are handled through the separate Arvada Permits (eTRAKiT) site. Authority: City of Arvada — Building Services.
Permit Thresholds
Arvada permit thresholds
- Code reference
- Arvada requires building permits for most residential construction, alteration, repair, enlargement, replacement, equipment installation, use/occupancy changes, and demolition work, per the City’s Building Permits page and Chapter 18 of the Arvada City Code (which adopts the 2024 International ResOrd. No. 4921
- Code reference
- This is assessed in lieu of sales tax on construction materials used in Arvada (Arvada Municipal Code § 98-84).§ 98-84
- Code reference
- A separate 2026 Building Fee Schedule PDF is referenced but not detailed on the main pages.
- Code reference
- For the most current or project-specific details (including any local amendments to the 2024 IRC that might address minor/exempt work or structural thresholds), contact the Arvada Building Safety Division or check the adopted codes on the City website, as published information emphasizes case-by-cas
Codes are amended regularly — verify current requirements with City of Arvada — Building Services.
Energy Code
Arvada energy code quick facts
- Code reference
- Arvada, Colorado, has adopted the Colorado Low Energy Carbon Code (or Model Low Energy and Carbon Code/MLECC/LECC), based on the 2024 International Energy Conservation Code (IECC), with no additional local energy-code amendments noted beyond the state model. This applies alongside the 2024 Inter
- Code reference
- Adoption occurred via City Council action on March 24, 2026 (effective for permits submitted on or after approximately July 1, 2026).
- Code reference
- Arvada (Climate Zone 5B) does not use the Denver Green Code or Energize Denver program.
- Code reference
- For remodels and additions, the modified/new portions generally must comply with the current code (per IECC/LECC Sections C502/C503 or R502/R503 equivalents) without necessarily triggering updates to unmodified existing systems.
- Code reference
- Key prescriptive requirements (drawn from the 2024 IECC residential provisions as adopted in the Colorado LECC; values for CZ 5; relevant to new or modified envelope elements in additions/remodels):
- Ceiling/attic insulation
- Minimum R-49 (Table R402.1.3 / equivalent in LECC).
- Wood-frame above-grade wall insulation
- Options include R-20 + R-5 ci, R-13 + R-10 ci, or equivalent assembly U-factor ≤ 0.045 (or reduced options such as R-20 cavity with additional efficiency credits per R408); see Table R402.1.2/R402.1.3.
- Air leakage (blower-door testing)
- Maximum 3.0 ACH50 at 50 Pa for the tested dwelling unit or building under the prescriptive path in CZ 3–5 (R402.5.1.3 / equivalent).
Codes are amended regularly — verify current requirements with City of Arvada — Building Services.
Zoning & Dimensional Standards
Setback & dimensional standards in Arvada
Zone-district dimensional standards for Arvada, quoted verbatim from the Arvada Land Development Code. Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
RN-12.5setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30 ft. |
| Side Interior Setback (min) | 10 ft. |
| Rear Setback (min) | 15 ft. |
| Building Coverage (max) | 35% |
| Building Height (max) | 28 ft. |
| Lot Area (min) | 12,500 sf. |
| Lot Width (min) | 100 ft. |
Arvada Land Development Code RN-12.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
RN-32.5setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30 ft. |
| Side Interior Setback (min) | 15 ft. |
| Rear Setback (min) | 15 ft. |
| Building Coverage (max) | 25% |
| Building Height (max) | 35 ft. |
| Lot Area (min) | 32,500 sf. |
| Lot Width (min) | 100 ft. |
Arvada Land Development Code RN-32.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
RN-4setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 18 ft. |
| Side Interior Setback (min) | 5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Coverage (max) | 40% |
| Building Height (max) | 28 ft. |
| Lot Area (min) | 4,000 sf. |
| Lot Width (min) | 40 ft. |
Arvada Land Development Code RN-4 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
RN-6setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 18 ft. |
| Side Interior Setback (min) | 5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Coverage (max) | 40% |
| Building Height (max) | 28 ft. |
| Lot Area (min) | 6,000 sf. |
| Lot Width (min) | 50 ft. |
Arvada Land Development Code RN-6 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
RN-7.5setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 20 ft. |
| Side Interior Setback (min) | 7.5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Coverage (max) | 40% |
| Building Height (max) | 28 ft. |
| Lot Area (min) | 7,500 sf. |
| Lot Width (min) | 75 ft. |
Arvada Land Development Code RN-7.5 setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
RN-Dsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 18 ft. |
| Side Interior Setback (min) | 5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Coverage (max) | 40% |
| Building Height (max) | 28 ft. |
| Lot Area (min) | 6,000 sf. |
| Lot Width (min) | 60 ft. |
Arvada Land Development Code RN-D setback standards (2-1-3-3 Table 2-1-3-3A (RN)) — effective 2025-12-16 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What interior painting covers
Interior painting in the Denver metro includes walls, ceilings, and trim with prep such as patching, sanding, and priming. Protection of floors and fixtures is part of a clean job. A municipally licensed Denver general contractor coordinates painting packages and related trades when repairs beyond finish work appear. Cost is project-specific and depends on room count, prep condition, and coat requirements.
text
Prep quality
Durability tracks prep: cleaning, de-glossing, stain blocking, and priming bare areas. Color changes over dark bases may need extra coats.
text
What buyers should prepare
Rooms in scope, preferred sheen, whether ceilings and trim are included, and building age.
FAQ
Common questions
How much does Paint Accent Wall cost in Arvada?
$245.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles licensing for interior painting projects?
A municipally licensed Denver general contractor coordinates the work and related specialty trades when needed. Colorado has no statewide general contractor license.
What changes for pre-1978 homes?
Disturbing paint can trigger EPA RRP requirements. Ask how lead-safe practices will be handled.
Should trim and ceilings be included?
Often yes for a uniform finish. Confirm in the written scope.
What information helps define scope?
Room list, prep concerns, sheen preference, building age, and city or county.
Service Area
Serving Arvada and Jefferson/Adams County
We serve Arvada, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Arvada project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore