DESIGN · BUILD · AUTOMATE
LONGMONT SERVICES
HVAC in Longmont
Licensed HVAC services for Longmont and Boulder County. Climate control engineered for comfort.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Climate control engineered for comfort
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
HVAC Services in Longmont, Colorado
Autotelic provides professional HVAC services throughout Longmont and the surrounding Boulder County area. Heating, ventilation, and air conditioning installation, replacement, and ductwork for residential and commercial buildings. Whether you're in Longmont (north Boulder County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Longmont permit thresholds
- Code reference
- The City of Longmont has adopted the 2024 International Codes, including the International Residential Code, effective July 1, 2026.
- Code reference
- Retaining walls over 48 inches.
- Code reference
- Accessory buildings over 120 square feet.
- Code reference
- Accessory buildings 120 square feet or less in floor area, though it is recommended to secure them against wind damage, and they must still meet setback requirements.
- Code reference
- Fencing below certain heights (commonly 6 feet).
- Foundations
- For one-story accessory structures greater than 120 square feet, foundations must be designed by a Colorado-licensed engineer, and the drawings must be stamped and sealed by that engineer.
- Code reference
- The City of Longmont enforces the 2024 International Codes, which became effective on July 1, 2026, along with the Metro Cohort Model Code.
- Code reference
- The Longmont Municipal Code incorporates by reference the International Residential Code for One and Two-Family Dwellings, 2021 Edition, including various appendix chapters.
Codes are amended regularly — verify current requirements with **The City of Longmont Building Services (Building Inspection division) issues residential building permits.
Energy Code
Longmont energy code quick facts
- Code reference
- 2024 IECC (Metro Cohort Model Code based on the 2024 International Energy Conservation Code, with local/regional amendments), effective July 1, 2026.
- Code reference
- Longmont adopted the 2024 International Codes (including the energy code) along with the Metro Cohort Model Code (MCMC, based on the 2024 IECC with regionally aligned amendments) via Ordinance O-2026-29 (adopted ~June 9, 2026; see Municode Chapter 16.22 for the energy conservation code adoption).Ordinance O-2026-29
- Code reference
- This aligns with Colorado state requirements for jurisdictions updating codes around this period (must meet or exceed 2021 IECC + electric/solar-ready provisions, with amendments not reducing stringency).
- Code reference
- Longmont follows its policy of adopting each new IECC version; it is not the Denver Green Code or Energize Denver program.
- Code reference
- Longmont is in IECC Climate Zone 5B.
- Key prescriptive requirements (from the adopted 2024 IECC/MCMC base provisions,
- Key prescriptive requirements (from the adopted 2024 IECC/MCMC base provisions, applicable to additions and alterations per the IECC scope for new construction elements in remodels/additions) relevant to remodels/additions in CZ 5B include (specific MCMC amendments may modify details; always verify
- Ceiling/attic insulation
- R-49 (or equivalent U-factor per Table R402.1.2/R402.1.3).
- Adopting ordinance/reference
- MCMC/2024 IECC Table R402.1.2 (or R402.1.3 component performance alternative) as adopted in Longmont Municipal Code Chapter 16.22.
Codes are amended regularly — verify current requirements with **The City of Longmont Building Services (Building Inspection division) issues residential building permits.
text
What HVAC work covers in the Denver metro
HVAC projects in the Denver metro include furnace and air-conditioner service, heat-pump and packaged-unit replacement, duct repairs, thermostat upgrades, and ventilation changes tied to remodels. Commercial buildings may also need rooftop units, zoning, and coordination with roofing or structural openings. A municipally licensed Denver general contractor coordinates the overall project and the licensed specialty trades required for mechanical and related electrical work. Scope should state whether the visit is repair, replacement, or a remodel that changes equipment location or duct routes.
text
Front Range climate and equipment choices
Denver winters and high summer temperatures put real load on heating and cooling equipment. Altitude, wide daily temperature swings, and wildfire-season air quality can influence filter strategy and outdoor-unit placement. Equipment selection should match the building's size, insulation, duct condition, and fuel or electrical service available on site. Replacement projects benefit from a load-aware assessment rather than one-for-one equipment swaps that ignore duct leakage or undersized returns. Cost is project-specific and depends on equipment type, access, duct work, and electrical or gas changes.
text
Remodel and commercial coordination
Kitchen, bathroom, and addition projects often change supply and return needs. Closing or opening rooms without adjusting airflow can create comfort problems. Commercial replacements commonly involve roof curbs, structural support, crane or lift access, and sequencing with roofing patches. A clear plan names equipment locations, thermostat zones, fresh-air requirements, and who will handle gas, electrical, and roof penetrations.
text
Permits and who coordinates the work
Many furnace, condenser, and duct alterations require mechanical permits and inspections through the local city or county. Related electrical or gas work is handled by the specialty trades qualified for that scope. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for HVAC packages. Permit responsibility and inspection sequencing should be stated in the project plan.
FAQ
Common questions
Repair or replace — how do you decide?
Repair is often practical for localized failures on equipment that is otherwise sound. Replacement is more common when the system is near end of life, parts are scarce, or comfort and efficiency goals cannot be met with the existing unit and ducts. An on-site assessment should drive that choice.
Who handles the HVAC permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for the work. Local city or county building departments issue mechanical and related permits. Colorado has no statewide general contractor license.
Do heat pumps work in Denver winters?
Cold-climate heat pumps can be appropriate for many Denver-metro homes when sized and installed for local design temperatures, often with a planned backup heat strategy. Suitability depends on the building envelope, electrical service, and comfort expectations.
How is commercial HVAC different from residential work?
Commercial projects more often involve rooftop equipment, larger duct systems, tighter sequencing around occupancy, and coordination with roofing and structural openings. Access for lifts or cranes can dominate the schedule.
What information helps define an accurate HVAC scope?
Equipment type and age if known, symptoms or comfort complaints, fuel source, recent utility bills if available, remodel drawings, and photos of the furnace closet, attic, or rooftop unit. Note the city or county for permitting.
Service Area
Serving Longmont and Boulder County
We serve Longmont, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Longmont project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore