DESIGN · BUILD · AUTOMATE
ENGLEWOOD SERVICES
HVAC in Englewood
Licensed HVAC services for Englewood and Arapahoe County. Climate control engineered for comfort.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Climate control engineered for comfort
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
HVAC Services in Englewood, Colorado
Autotelic provides professional HVAC services throughout Englewood and the surrounding Arapahoe County area. Heating, ventilation, and air conditioning installation, replacement, and ductwork for residential and commercial buildings. Whether you're in Englewood (south central Denver metro) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Englewood permit thresholds
- Code reference
- In Englewood, Colorado, building permits for residential remodel work are generally required based on the specific type of work performed rather than a fixed valuation threshold. The City requires permits for most construction projects to ensure compliance with adopted building codes (including
- Code reference
- Repair of roofing or siding when the repaired area is less than 100 square feet.
- Code reference
- Decks under 200 square feet that are not attached to the house, do not serve an exit door, and are not more than 30 inches above grade (zoning approval still required).
- Code reference
- The City’s use tax rate is 3.80% applied to 50% of the project valuation (an estimate assuming 50% of valuation represents taxable construction materials).
- Code reference
- A reconciliation process is available post-project if actual materials differ from the 50% estimate.
- Code reference
- Relevant references include the City’s “To Permit or Not To Permit” guidance and the Sales, Use and Other Taxes page (with citations to EMC Title 4, Chapter 4 for sales/use tax rules).
Codes are amended regularly — verify current requirements with **The City of Englewood’s Building and Codes Division (part of the Community Development Department) issues residential building permits.
Energy Code
Englewood energy code quick facts
- Code reference
- 2024 International Energy Conservation Code (IECC), adopted by the City of Englewood with no specific local amendments detailed on the official building division page (effective for all permits submitted after May 31, 2026).
- Code reference
- This applies to the Denver-metro area (Climate Zone 5B).
- Code reference
- Key prescriptive requirements from the 2024 IECC (relevant to remodels/additions via the residential or existing-building provisions, e.g., R402 and related sections) include the following (standard base-code values, as no local amendments are specified):
- Code reference
- Vertical fenestration U-factor ≤ 0.28 (Table R402.1.2, Climate Zone 5 and Marine 4).
- Code reference
- Skylight U-factor ≤ 0.50 (Table R402.1.2, Climate Zone 5 and Marine 4).
- Code reference
- Air leakage ≤ 3.0 ACH50 at 50 Pa for detached one-family dwellings in Climate Zones 3–5 (or ≤ 0.27 cfm/ft² of enclosure area for smaller homes/attached units); testing required (R402.4.1.2).
- Code reference
- Additional common prescriptive envelope items (from 2024 IECC Tables R402.1.2/R402.1.3 for CZ 5) typically cover ceiling/attic, wall, and other assemblies, but exact R-values/U-factors should be verified directly from the adopted code edition as they involve trade-offs and footnotes.
Codes are amended regularly — verify current requirements with **The City of Englewood’s Building and Codes Division (part of the Community Development Department) issues residential building permits.
text
What HVAC work covers in the Denver metro
HVAC projects in the Denver metro include furnace and air-conditioner service, heat-pump and packaged-unit replacement, duct repairs, thermostat upgrades, and ventilation changes tied to remodels. Commercial buildings may also need rooftop units, zoning, and coordination with roofing or structural openings. A municipally licensed Denver general contractor coordinates the overall project and the licensed specialty trades required for mechanical and related electrical work. Scope should state whether the visit is repair, replacement, or a remodel that changes equipment location or duct routes.
text
Front Range climate and equipment choices
Denver winters and high summer temperatures put real load on heating and cooling equipment. Altitude, wide daily temperature swings, and wildfire-season air quality can influence filter strategy and outdoor-unit placement. Equipment selection should match the building's size, insulation, duct condition, and fuel or electrical service available on site. Replacement projects benefit from a load-aware assessment rather than one-for-one equipment swaps that ignore duct leakage or undersized returns. Cost is project-specific and depends on equipment type, access, duct work, and electrical or gas changes.
text
Remodel and commercial coordination
Kitchen, bathroom, and addition projects often change supply and return needs. Closing or opening rooms without adjusting airflow can create comfort problems. Commercial replacements commonly involve roof curbs, structural support, crane or lift access, and sequencing with roofing patches. A clear plan names equipment locations, thermostat zones, fresh-air requirements, and who will handle gas, electrical, and roof penetrations.
text
Permits and who coordinates the work
Many furnace, condenser, and duct alterations require mechanical permits and inspections through the local city or county. Related electrical or gas work is handled by the specialty trades qualified for that scope. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for HVAC packages. Permit responsibility and inspection sequencing should be stated in the project plan.
FAQ
Common questions
Repair or replace — how do you decide?
Repair is often practical for localized failures on equipment that is otherwise sound. Replacement is more common when the system is near end of life, parts are scarce, or comfort and efficiency goals cannot be met with the existing unit and ducts. An on-site assessment should drive that choice.
Who handles the HVAC permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for the work. Local city or county building departments issue mechanical and related permits. Colorado has no statewide general contractor license.
Do heat pumps work in Denver winters?
Cold-climate heat pumps can be appropriate for many Denver-metro homes when sized and installed for local design temperatures, often with a planned backup heat strategy. Suitability depends on the building envelope, electrical service, and comfort expectations.
How is commercial HVAC different from residential work?
Commercial projects more often involve rooftop equipment, larger duct systems, tighter sequencing around occupancy, and coordination with roofing and structural openings. Access for lifts or cranes can dominate the schedule.
What information helps define an accurate HVAC scope?
Equipment type and age if known, symptoms or comfort complaints, fuel source, recent utility bills if available, remodel drawings, and photos of the furnace closet, attic, or rooftop unit. Note the city or county for permitting.
Service Area
Serving Englewood and Arapahoe County
We serve Englewood, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Englewood project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore