DESIGN · BUILD · AUTOMATE
WHEAT RIDGE SERVICES
Framing in Wheat Ridge
Licensed framing services for Wheat Ridge and Jefferson County. The skeleton of every great build.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
The skeleton of every great build
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Framing Services in Wheat Ridge, Colorado
Autotelic provides professional framing services throughout Wheat Ridge and the surrounding Jefferson County area. Wood and steel framing for new construction, additions, and remodels with structural accuracy and fast turnaround. Whether you're in Wheat Ridge (central Jefferson County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Wheat Ridge permit thresholds
- Code reference
- Retaining walls over 4' high (or supporting a surcharge) and other structural elements like decks or room additions explicitly require permits; any structural work in a remodel would qualify as an alteration requiring a permit.
- Code reference
- These requirements are enforced under the City of Wheat Ridge Municipal Code, Chapter 5, Article II, Division 2 (Building Permits).
- Use tax
- Per City Code Section 22-68, use tax is charged at 3.5% of 60% of the project valuation (60% of valuation is assumed to be materials subject to tax).Section 22-68
- Code reference
- Permit fees are based on the higher of the applicant’s valuation or the building official’s minimum (using ICC Building Valuation Data); a separate plan review fee (65% of the permit fee) applies where required.
Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.
Energy Code
Wheat Ridge energy code quick facts
- Code reference
- 2024 IECC (with Colorado Model Low Energy and Carbon Code, 2025 edition, and Colorado Model Electric Ready and Solar Ready Code), adopted by reference with primarily administrative/local amendments (no technical energy amendments noted).
- Code reference
- This replaces the prior 2018 I-Codes.
- Code reference
- City Council approved on October 27, 2025 (Ordinance 1883); the 2024 codes (including 2024 IECC, excluding Chapter 1 but retaining Sections C102, R102, C107, and R107) apply to all new permit applications beginning January 1, 2026.Ordinance 1883
- Code reference
- Wheat Ridge is in Climate Zone 5B.
- Code reference
- Requirements for remodels/additions generally follow the 2024 IECC (and Colorado model code) provisions applicable to existing buildings (often via IEBC cross-references or specific existing-building sections), with no local technical amendments identified that alter prescriptive values.
- Code reference
- Specific numeric prescriptive requirements (e.g., R-values, U-factors, air-sealing thresholds) are those in the base 2024 IECC/Colorado model code for CZ 5B; local adoption does not modify them.
- Permit-related tax/fee (construction use tax)
- Use tax of 3.5% applied to 60% of the project valuation (separate from and in addition to the building permit fee, which is calculated via a tiered schedule based on valuation).
- Code reference
- Adopting references include Chapter 5 of the Wheat Ridge Municipal Code (incorporating the listed codes by reference) and Ordinance 1883.Ordinance 1883
Codes are amended regularly — verify current requirements with **City of Wheat Ridge Building Division (City of Wheat Ridge, Colorado) issues residential building permits.
Zoning & Dimensional Standards
Setback & dimensional standards in Wheat Ridge
Zone-district dimensional standards for Wheat Ridge, quoted verbatim from the Wheat Ridge Code of Ordinances (Ch.26 Zoning). Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
A-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' (g) |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 1 acre |
| Lot Width (min) | 140' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
A-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' (g) |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 1 acre |
| Lot Width (min) | 140' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) A-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 30' (c) |
| Side Setback (min) | 15' |
| Rear Setback (min) | 15' |
| Building Coverage (max) | 25% |
| Building Height (max) | 35' |
| Lot Area (min) | 12,500 sf |
| Lot Width (min) | 100' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (c) |
| Side Setback (min) | 10' |
| Rear Setback (min) | 15' (h) |
| Building Coverage (max) | 30% |
| Building Height (max) | 35' |
| Lot Area (min) | 9,000 sf |
| Lot Width (min) | 75' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Bsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (e) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1B setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-1Csetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 20' (d) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 5' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 5,000 sf |
| Lot Width (min) | 50' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-1C setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (e) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 9,000 sf |
| Lot Width (min) | 75' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-2Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (d) |
| Side Setback (min) | 5' (d) |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-2A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-3setback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (e) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3 setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
R-3Asetback & dimensional standards
| Standard | Requirement |
|---|---|
| Front Setback (min) | 25' (e) |
| Side Setback (min) | 5' |
| Rear Setback (min) | 10' |
| Building Coverage (max) | 40% |
| Building Height (max) | 35' |
| Lot Area (min) | 7,500 sf |
| Lot Width (min) | 60' |
Wheat Ridge Code of Ordinances (Ch.26 Zoning) R-3A setback standards (Ch.26 Art.II district standards tables) — effective 2025-01-27 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What framing work covers
Framing in the Denver metro includes partition walls, new openings, blocking, and structural framing for additions or major remodels. Load-bearing changes need careful planning and often engineering. A municipally licensed Denver general contractor coordinates framing and licensed specialty trades for related mechanical openings. Cost is project-specific and depends on span, structure type, and access.
text
Load paths and openings
Removing walls or widening openings can change how loads move through the house. Headers, posts, and foundations must be checked before demo. Temporary shoring may be required during the work.
text
Permits and who coordinates the work
Structural framing and many opening changes typically need building permits and inspections through City and County of Denver Community Planning and Development. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when the package includes regulated systems.
text
What buyers should prepare
Goals for open layouts, any known prior unpermitted openings, and whether engineering drawings already exist.
FAQ
Common questions
Do I need a Denver permit to remove a wall?
Usually yes if the wall is load-bearing or the opening changes structure. Confirm with CPD and assess the load path first.
Who handles framing permits and licensing?
A municipally licensed Denver general contractor coordinates the project and related specialty trades. Colorado has no statewide general contractor license.
When is an engineer needed?
Commonly when loads change beyond simple partition work. CPD may require engineered details for certain scopes.
Can framing start before other permits?
Follow the issued permit sequence. Rough inspections typically happen before insulation and drywall.
What information helps define scope?
Desired layout changes, photos, existing plans if any, and city or county.
Service Area
Serving Wheat Ridge and Jefferson County
We serve Wheat Ridge, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Wheat Ridge project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore