DESIGN · BUILD · AUTOMATE
CHERRY HILLS VILLAGE SERVICES
Fiber Optic in Cherry Hills Village
Licensed fiber optic services for Cherry Hills Village and Arapahoe County. High-speed backbone infrastructure.
What Cherry Hills Village requires
Code reference: ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes) §105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
High-speed backbone infrastructure
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Fiber Optic Services in Cherry Hills Village, Colorado
Autotelic provides professional fiber optic services throughout Cherry Hills Village and the surrounding Arapahoe County area. Single-mode and multi-mode fiber optic cabling with termination, splicing, and OTDR testing for campus and building networks. Whether you're in Cherry Hills Village (affluent south Denver) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Fiber Optic project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Cherry Hills Village permit thresholds
- Code reference
- The Village adopted the 2024 International Codes (I-Codes) at the beginning of 2026, including the 2024 International Residential Code (IRC), and adheres to Chapter 18 of the Cherry Hills Village Municipal Code for building regulations.
- Code reference
- If an addition is more than 50% of the existing square footage, or if the aggregate floor area is demolished or reconstructed by more than 50%, or increased by 50% or more, the project is considered "redevelopment" and may have additional submittal and drainage requirements per Chapter 9 of the zoni
- Code reference
- Any electrical work on 400 amps (320 continuous) or greater requires a separate plan review.
- Impervious Surface
- If more than 2,500 square feet of impervious surface is added cumulatively (e.g., house addition, driveway, patio), a Phase III Drainage Plan is required.
- Code Reference
- Cherry Hills Village Municipal Code, Chapter 18, and the adopted 2024 International Residential Code.
- Code reference
- ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes)§105.2
- Code reference
- One-story detached, prefabricated storage sheds that do not exceed 120 square feet.
- Code Reference
- Cherry Hills Village Municipal Code, Section 105.2, referencing adopted I-Codes.§105.2
Codes are amended regularly — verify current requirements with **The City of Cherry Hills Village (specifically its Building Division under Community Development) issues residential building permits.
text
What fiber work covers
Premises fiber in the Denver metro typically includes pulling single-mode or multimode cable, fusion or connector terminations, patch panels, and media converters or ONTs at the demarc. Indoor pathways use existing conduit, J-hooks, or new raceway. Outdoor work on the lot is different from work in the public right-of-way. A municipally licensed Denver general contractor coordinates the project and licensed specialty trades for low-voltage and electrical portions. Cost is project-specific and depends on run length, terminations, and whether conduit is new.
text
Indoor electrical vs street ROW
Hardwired racks, PoE switches, and new circuits go through City and County of Denver Community Planning and Development electrical permits. Colorado DORA regulates electrical licensing. Fiber or power conduit in the public ROW is a DOTI construction/occupancy permit, and longer conduit runs may need a Utility Plan Review. Zoning telecommunications permits cover antennas and ground equipment on private property, not ordinary indoor premises cabling.
text
Permits and who coordinates the work
CPD handles electrical permits for line-voltage work tied to the fiber plant. DOTI handles street cuts and ROW occupancy when the drop leaves the property. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for fiber-optic scopes.
text
What buyers should prepare
Whether this is an indoor backbone or a street drop, existing conduit photos, desired termination rooms, and city or county.
FAQ
Common questions
Do indoor fiber runs need a Denver permit?
The fiber itself is often low-voltage. New circuits, hardwired racks, or line-voltage work typically need a CPD electrical permit.
Who handles fiber permits and licensing?
A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.
When does DOTI get involved?
When conduit or a street cut is in the public right-of-way. That is a ROW construction or occupancy permit, sometimes with a Utility Plan Review.
Single-mode or multimode?
Single-mode is typical for longer campus or ISP drops. Multimode is still common for short indoor backbones. Match the optics at both ends.
What information helps define scope?
Run length, indoor vs ROW, existing conduit, termination locations, and city or county.
Service Area
Serving Cherry Hills Village and Arapahoe County
We serve Cherry Hills Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Cherry Hills Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore