DESIGN · BUILD · AUTOMATE
LAKEWOOD SERVICES
Custom Cabinetry in Lakewood
Licensed custom cabinetry services for Lakewood and Jefferson County. Storage that works and looks great.
What Lakewood requires
Code reference: Permits are generally required for residential remodel work in Lakewood, Colorado, unless the work falls under specific exemptions listed in the city’s adopted Building Code (referenced as § 105.2 in secondary sources and detailed in the official exemptions list). There are no broad valuation th § 105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Storage that works and looks great
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Custom Cabinetry Services in Lakewood, Colorado
Autotelic provides professional custom cabinetry services throughout Lakewood and the surrounding Jefferson County area. Custom cabinetry across the Denver metro — kitchen, bath, closet, and built-in cabinets from stock to full-custom with soft-close hardware and organizational inserts. Whether you're in Lakewood (Jefferson County's largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Custom Cabinetry project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permits & Licensing
Permits in Lakewood
Lakewood building and construction permits are issued through the Public Works Department, and contractors must be registered with the city and hold a Lakewood contractor account before pulling permits. Permitting and inspections run through the city's eTRAKiT online system. Authority: City of Lakewood — Public Works Department (Building and Construction Permits).
Permit Thresholds
Lakewood permit thresholds
- Code reference
- Permits are generally required for residential remodel work in Lakewood, Colorado, unless the work falls under specific exemptions listed in the city’s adopted Building Code (referenced as § 105.2 in secondary sources and detailed in the official exemptions list). There are no broad valuation th§ 105.2
- Code reference
- One-story detached accessory buildings (tool/storage sheds, pergolas, playhouses, etc.) ≤ 120 sq ft (commercial) or ≤ 200 sq ft (residential), with additional placement rules.
- Code reference
- Moveable cases, cabinets, counters, and partitions ≤ 5’9” high.
- Code reference
- Retaining walls ≤ 30 inches high (unless supporting surcharge or impounding flammables).
- Code reference
- Private walks/driveways ≤ 30 inches above grade (not over basement/story below, not part of accessible route).
- Code reference
- Prefabricated non-heated swimming pools < 24 inches deep without circulation system.
- Code reference
- Window awnings on Group R-3 occupancies projecting ≤ 54” from exterior wall.
- Code reference
- Roof covering repairs < 100 sq ft (unless removing mechanical/electrical equipment).
Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).
Energy Code
Lakewood energy code quick facts
- Code reference
- 2021 IECC (with Colorado Model Electric Ready and Solar Ready Code amendments required by state law HB22-1362; Lakewood has also adopted solar-ready provisions via Appendix RB).
- Code reference
- Lakewood’s adopted codes document explicitly lists the 2021 International Energy Conservation Code (no major local energy-specific amendments noted beyond state-mandated additions).
- Code reference
- Climate zone is 5 (5B for the Denver-metro area).
- Code reference
- Key prescriptive requirements (from 2021 IECC Table R402.1.2 and related sections for Climate Zone 5, applicable to new construction, additions, and alterations/remodels where triggered; existing buildings and additions must comply with envelope and other provisions unless exempted):
- Ceiling/attic insulation
- R-60 (or equivalent U-factor).
- Adopting reference
- 2021 IECC Table R402.1.2 (R402.1 prescriptive requirements).
- Wood-frame wall insulation
- R-20 + R-5ci or R-13 + R-10ci (or equivalent U-factor).
- Adopting reference
- 2021 IECC Table R402.1.2.
Codes are amended regularly — verify current requirements with City of Lakewood — Public Works Department (Building and Construction Permits).
text
What custom cabinetry covers
Custom cabinetry in the Denver metro includes kitchens, baths, offices, garages, and built-ins designed to fit irregular walls and exact appliance sizes. Scope usually covers design, fabrication, install, and hardware fit. A municipally licensed Denver general contractor coordinates cabinet packages and licensed specialty trades when sinks or electrical devices move. Cost is project-specific and depends on construction grade, finish, and layout complexity.
text
Measure and lead times
Field measures should capture out-of-square conditions common in older Front Range homes. Custom work needs longer lead times than stock. Counters are templated after cabinets are set.
text
Permits and who coordinates the work
Same-layout cabinet installs without plumbing or electrical changes are generally treated as finish work that does not need a City and County of Denver building permit. Moving utilities typically needs trade permits through CPD or the local building department. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when required.
text
What buyers should lock early
Appliance models, sink type, finish samples, and whether an island is included. Late changes after fabrication extend schedules.
FAQ
Common questions
Do custom cabinets need a Denver building permit?
Usually not when the layout and utilities stay put. Moving plumbing or electrical typically needs trade permits via CPD.
Who handles permits and licensing when utilities move?
A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.
When are counters templated?
After cabinets are installed and leveled.
Stock vs custom — what changes?
Custom fits unusual spaces and sizes with longer lead times. Stock is faster with fewer size options.
What information helps define scope?
Room photos or plans, appliance list, finish preference, utility move plans, and city or county.
Service Area
Serving Lakewood and Jefferson County
We serve Lakewood, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lakewood project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore