DESIGN · BUILD · AUTOMATE
WESTMINSTER SERVICES
Cabinetry in Westminster
Licensed cabinetry services for Westminster and Adams/Jefferson County. Storage that works and looks great.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Storage that works and looks great
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Cabinetry Services in Westminster, Colorado
Autotelic provides professional cabinetry services throughout Westminster and the surrounding Adams/Jefferson County area. Kitchen, bath, and custom cabinetry from stock to full-custom with hardware, soft-close, and organizational inserts. Whether you're in Westminster (between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permits & Licensing
Permits in Westminster
Westminster building permits are issued by the Building Division within Community Services, and the city requires general contractors and mechanical, plumbing, and electrical subcontractors to be registered with the city before permit release. The permitting process is fully paperless, running through Westminster's eTRAKiT portal. Authority: City of Westminster — Building Division (Community Services Department).
Permit Thresholds
Westminster permit thresholds
- Code reference
- The primary source is the City of Westminster Building Division’s *Residential Building Permit Requirements* document (updated August 22, 2024), available on the official city website.
- Code reference
- Many exterior items common in remodels/additions (decks >30" above grade, room additions, attached/detached garages, retaining walls >3 ft or with surcharge, etc.) also require permits.
- Code reference
- Decks ≤30 inches above ground (with caveats).
- Code reference
- Stand-alone storage sheds ≤120 sq ft with no electrical/plumbing/mechanical.
- Code reference
- Minor roofing repair (≤100 sq ft).
- Code reference
- Minor siding repair (<100 sq ft).
- Code reference
- Retaining walls ≤36 inches in height (no surcharge).
Codes are amended regularly — verify current requirements with City of Westminster — Building Division (Community Services Department).
Energy Code
Westminster energy code quick facts
- Code reference
- Westminster, Colorado, has adopted the 2021 International Energy Conservation Code (IECC) together with the Colorado Model Electric Ready and Solar Ready Codes (as required by state law HB22-1362 for jurisdictions updating building codes).
- Code reference
- This applies to new construction, major renovations, remodels, and additions (with the building thermal envelope and other provisions triggered as applicable under the IECC).
- Code reference
- Westminster is in Climate Zone 5B.
- Code reference
- No unique local amendments decreasing stringency or deviating from the 2021 IECC prescriptive tables (plus the state model electric/solar-ready provisions) are indicated in available adoption materials.
- Code reference
- Key prescriptive requirements for remodels/additions (drawn from the adopted 2021 IECC Residential provisions, Table R402.1.2 / R402.1.3 and related sections; these apply where the scope triggers energy code compliance for the affected envelope components):
- Ceiling/attic insulation
- Minimum R-60 (or equivalent U-factor ≤ 0.026).
- Code reference
- (2021 IECC Table R402.1.2 / R402.1.3, Climate Zone 5.)
- Wood-frame wall insulation
- Minimum R-30 (or 20 + 5 ci, 13 + 10 ci, or 0 + 20 ci options) or equivalent U-factor ≤ 0.045.
Codes are amended regularly — verify current requirements with City of Westminster — Building Division (Community Services Department).
text
What cabinetry work covers
Cabinetry projects in the Denver metro include kitchen and bath cabinets, laundry and garage storage, and custom built-ins. Scope usually covers layout, supply or fabrication, removal of existing boxes when needed, installation, hardware adjustment, and coordination with countertops and appliances. Commercial work may include breakrooms, reception desks, and durable laminate millwork. A municipally licensed Denver general contractor coordinates cabinet packages and the licensed specialty trades required when sinks, dishwashers, or electrical devices move with the layout. Cost is project-specific and depends on linear footage, construction grade, finish, and whether utilities relocate.
text
Measure, lead times, and install sequence
Accurate field measures matter in older Denver homes that are out of square. Stock and semi-custom lines trade speed for fewer size options; custom work fits unusual walls and appliance sizes but needs longer lead times. Install typically follows rough trades and drywall, then counters and backsplash follow cabinet set. Confirm who supplies counters and who cuts sink openings before cabinets are ordered. Soft-close hardware, finished ends, and filler strips should be listed in the written scope.
text
Permits and who coordinates the work
City and County of Denver Community Planning and Development generally treats cabinet-only replacements in the same layout, without plumbing or electrical changes, as finish work that does not need a building permit. Permits become likely when the project relocates plumbing fixtures, adds electrical, or is part of a larger remodel that changes the floor plan or structure. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when utility work is part of the cabinet package.
text
What buyers should lock early
Appliance models, sink type, whether an island is included, finish samples, and handle/pull selections drive box sizes and counter templating. Changing those after order often means delays. For baths, confirm vanity depth, mirror lighting, and plumbing centerlines before boxes are built.
FAQ
Common questions
Do cabinet replacements need a Denver building permit?
Often no when cabinets stay in the same layout and plumbing or electrical systems are not changed. CPD is the building-permit authority inside Denver. Moving a sink or adding circuits usually triggers trade permits.
Who handles cabinetry project permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for any plumbing or electrical work. Colorado has no statewide general contractor license.
When should counters be templated?
After cabinets are set and leveled. Templating too early risks counters that do not fit final box positions.
Stock, semi-custom, or custom — what changes?
Lead time, size flexibility, and finish options. Stock is fastest; custom fits unusual spaces and appliance sizes. The right choice depends on schedule and layout complexity.
What information helps define an accurate cabinetry scope?
Room photos or measurements, appliance list, whether the sink or utilities move, finish preference, and the city or county for any related permits.
Service Area
Serving Westminster and Adams/Jefferson County
We serve Westminster, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Westminster project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore