DESIGN · BUILD · AUTOMATE
FEDERAL HEIGHTS SERVICES
Cabinetry in Federal Heights
Licensed cabinetry services for Federal Heights and Adams County. Storage that works and looks great.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Storage that works and looks great
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Cabinetry Services in Federal Heights, Colorado
Autotelic provides professional cabinetry services throughout Federal Heights and the surrounding Adams County area. Kitchen, bath, and custom cabinetry from stock to full-custom with hardware, soft-close, and organizational inserts. Whether you're in Federal Heights (north central Denver metro) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Federal Heights permit thresholds
- Code reference
- Federal Heights, CO (Municipal Code Chapter 10, Article II, as amended by Ordinance No. 21-01, adopting the 2018 International Codes with local amendments) requires building permits for most residential remodel/alteration work, with limited exemptions.Ordinance No. 21-01
- Code reference
- The city adopts the 2018 IBC, IRC (for residential), IEBC, and related codes (with amendments in Sec. 10-16 and 10-18).Sec. 10-16
- Exempt work list (amended Sec. 105.2 of the codes)
- Standard IRC/IBC exemptions are significantly restricted.Sec. 105.2
- Code reference
- The exemption for fences less than 7 feet high.
- Code reference
- The city uses the 2018 codes’ general framework for when work requires permitting.
- Code reference
- Fees (per city Building Permit Fees page and Municipal Code Sec. 10-17):Sec. 10-17
- Building permit fee
- Based on total project valuation (labor + materials); tiered schedule applies (examples): $1–$500 = $23.50; $501–$2,000 = $23.50 + $3.05 per additional $100 (or fraction) up to $2,000; higher tiers up to $1M+ with decreasing per-$1,000 rates.
- Plan review fee
- 65% of the building permit fee (waived for certain simple projects like water heaters/furnaces/roofing without plan review; collected upfront for valuations > $25,000).
Codes are amended regularly — verify current requirements with **The City of Federal Heights Building Department issues residential building permits.
Energy Code
Federal Heights energy code quick facts
- Code reference
- 2018 IECC (no local amendments noted; kept as the 2018 edition when the city adopted the 2021 ICC codes effective April 15, 2023).
- Code reference
- Federal Heights explicitly retained the 2018 International Energy Conservation Code for energy requirements rather than updating it alongside other 2021 ICC codes (per city website and related ordinances such as those referenced in the 2023 adoption process, e.g., Ordinance No. 23-02 context).Ordinance No. 23-02
- Code reference
- Federal Heights is in Climate Zone 5B.
- Code reference
- Key prescriptive requirements (from 2018 IECC, applicable to remodels/additions/alterations where triggered; no local amendments identified):
- Ceiling/attic insulation
- R-49 (Table R402.1.2).
- Wood-frame wall insulation
- R-20 cavity or R-13 cavity + R-5 continuous insulation (Table R402.1.2).
- Floors over unconditioned space
- R-30 (Table R402.1.2).
- Air leakage
- Building or dwelling unit tested and verified to ≤ 3 ACH50 (or per applicable table/zone provision in R402.4.1.2; exact threshold follows 2018 base code for CZ 3–8).
Codes are amended regularly — verify current requirements with **The City of Federal Heights Building Department issues residential building permits.
text
What cabinetry work covers
Cabinetry projects in the Denver metro include kitchen and bath cabinets, laundry and garage storage, and custom built-ins. Scope usually covers layout, supply or fabrication, removal of existing boxes when needed, installation, hardware adjustment, and coordination with countertops and appliances. Commercial work may include breakrooms, reception desks, and durable laminate millwork. A municipally licensed Denver general contractor coordinates cabinet packages and the licensed specialty trades required when sinks, dishwashers, or electrical devices move with the layout. Cost is project-specific and depends on linear footage, construction grade, finish, and whether utilities relocate.
text
Measure, lead times, and install sequence
Accurate field measures matter in older Denver homes that are out of square. Stock and semi-custom lines trade speed for fewer size options; custom work fits unusual walls and appliance sizes but needs longer lead times. Install typically follows rough trades and drywall, then counters and backsplash follow cabinet set. Confirm who supplies counters and who cuts sink openings before cabinets are ordered. Soft-close hardware, finished ends, and filler strips should be listed in the written scope.
text
Permits and who coordinates the work
City and County of Denver Community Planning and Development generally treats cabinet-only replacements in the same layout, without plumbing or electrical changes, as finish work that does not need a building permit. Permits become likely when the project relocates plumbing fixtures, adds electrical, or is part of a larger remodel that changes the floor plan or structure. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when utility work is part of the cabinet package.
text
What buyers should lock early
Appliance models, sink type, whether an island is included, finish samples, and handle/pull selections drive box sizes and counter templating. Changing those after order often means delays. For baths, confirm vanity depth, mirror lighting, and plumbing centerlines before boxes are built.
FAQ
Common questions
Do cabinet replacements need a Denver building permit?
Often no when cabinets stay in the same layout and plumbing or electrical systems are not changed. CPD is the building-permit authority inside Denver. Moving a sink or adding circuits usually triggers trade permits.
Who handles cabinetry project permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for any plumbing or electrical work. Colorado has no statewide general contractor license.
When should counters be templated?
After cabinets are set and leveled. Templating too early risks counters that do not fit final box positions.
Stock, semi-custom, or custom — what changes?
Lead time, size flexibility, and finish options. Stock is fastest; custom fits unusual spaces and appliance sizes. The right choice depends on schedule and layout complexity.
What information helps define an accurate cabinetry scope?
Room photos or measurements, appliance list, whether the sink or utilities move, finish preference, and the city or county for any related permits.
Service Area
Serving Federal Heights and Adams County
We serve Federal Heights, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Federal Heights project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore