DESIGN · BUILD · AUTOMATE
BRIGHTON SERVICES
Cabinetry in Brighton
Licensed cabinetry services for Brighton and Adams County. Storage that works and looks great.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Storage that works and looks great
EVERY PROJECT STARTS WITH DESIGN
Local Service
Cabinetry Services in Brighton, Colorado
Autotelic provides professional cabinetry services throughout Brighton and the surrounding Adams County area. Kitchen, bath, and custom cabinetry from stock to full-custom with hardware, soft-close, and organizational inserts. Whether you're in Brighton (northeast Denver metro) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Brighton permit thresholds
- Brighton, Colorado (City of Brighton building department) requires a building pe
- Any owner or authorized agent who intends to construct, enlarge, alter, repair, move, demolish or change the occupancy of a building or structure, or to erect, install, enlarge, alter, repair, remove, convert or replace any electrical, gas, mechanical or plumbing system...Section R105.1
- Code reference
- This is codified in Brighton Municipal Code (BMC) Chapter 15 (Buildings and Construction), particularly Article 15-28 (International Residential Code adoption and amendments).
- Building
- One-story detached accessory structures (e.g., sheds, playhouses) ≤ 200 sq ft floor area (zoning must still be met); retaining walls ≤ 4 ft high (footing to top); painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work; prefabricated swimming pools < 24" deep; swing set
- Electrical
- Listed plug-and-cord temporary decorative lighting; replacement of a circuit breaker (same location/capacity); low-voltage wiring/devices (< 25 volts, ≤ 50 watts); minor repairs like changing bulbs or same-location fixture/outlet replacement.
- Notes on exemptions and triggers
- The FAQ lists slightly varying shed thresholds (e.g., < 120 sq ft in one place); the dedicated permit guide (200 sq ft) is the more specific reference.
- Code reference
- Any structural alteration, enlargement, or repair affecting the structure generally triggers a permit under the broad “alter/repair” language of R105.1 (no separate valuation-based threshold or explicit “structural trigger” list beyond this).
- Use tax/fee basis
- Use tax is 3.75% applied to 50% of the project valuation (materials + labor).
Codes are amended regularly — verify current requirements with **The City of Brighton (specifically its Community Development/Building Division) issues residential building permits.
Energy Code
Brighton energy code quick facts
- Code reference
- 2021 IECC (no specific local energy code amendments identified beyond the base code and any applicable state requirements).
- Code reference
- Brighton’s official codes page explicitly lists the International Energy Conservation Code 2021 (alongside the other 2021 I-Codes).
- Code reference
- Colorado state law (e.g., HB 22-1362) requires adoption of the 2021 IECC (plus electric/solar ready provisions) when updating other building codes, but Brighton’s published list aligns with the 2021 edition without further local overrides described.
- Code reference
- Brighton is in Climate Zone 5B (standard for the Denver-metro/Adams County area).
- Code reference
- Key prescriptive requirements relevant to remodels/additions are drawn from the 2021 IECC (base code) for CZ 5B.
- Code reference
- Specific numeric values and sections are not detailed in Brighton’s public code listings or amendments pages; refer directly to the 2021 IECC Table R402.1.2 (or equivalent) and related sections for wall/ceiling insulation R-values or U-factors, air-sealing thresholds (typically tested or prescriptiv
- Code reference
- The city adopts the 2021 IECC via its standard building code adoption process (see codes page and related ordinances adopting the 2021 I-Codes).
- Construction use tax
- City of Brighton imposes a 3.75% city use tax on construction and building materials (paid on an estimated basis at permit issuance; contractors track and reconcile actuals; present permit to suppliers to avoid duplicate city sales tax).
Codes are amended regularly — verify current requirements with **The City of Brighton (specifically its Community Development/Building Division) issues residential building permits.
text
Cabinetry for kitchens, baths, and storage
Cabinetry is non-structural interior finish work that covers design or layout, cabinet supply or fabrication, and installation of kitchen, bath, laundry, and built-in storage units. Related work often includes hardware, doors and drawers, and—when coordinated as part of the same scope—countertops or backsplashes. In a typical remodel sequence, cabinetry follows framing, drywall, plumbing, and electrical rough-in so boxes can be set level, plumb, and aligned with appliances and utilities already in place.
text
Typical scope of work
A cabinetry project may include measuring and layout, selecting stock, semi-custom, or custom units, ordering or fabricating boxes and fronts, installing base and wall cabinets, hanging doors, fitting drawers, setting hardware, and making appliance cutouts or adjustments for a clean fit. Work can also cover pantry systems, laundry cabinets, mudroom or garage storage, and other built-in casework. Pure cabinetry work does not include structural changes, utility relocations, or major floor-plan alterations; those items belong in a broader remodel scope and may change permit needs.
text
Permits and inspections in Denver
In the City and County of Denver, like-for-like cabinet installation or replacement on single-family and duplex homes generally does not require a building permit or inspection when the work does not alter structure, plumbing, electrical, HVAC, or the floor plan. The same principle commonly applies to related finish items such as countertops when they are replacements in place. If the project also moves walls, relocates plumbing or electrical, or changes the layout, permits are handled through Denver Community Planning and Development (CPD) / Development Services via e-permits. Nearby jurisdictions, including parts of Jefferson County, often treat cabinet-only replacements similarly. Local rules still vary by address, so the authority having jurisdiction should be confirmed for each project.
text
Materials, construction, and climate notes
Cabinet boxes are commonly built from plywood (including multi-ply birch or hardwood veneer), particleboard or MDF with laminate or melamine, or engineered wood products. Doors and drawer fronts may use solid wood, MDF for painted or thermofoil finishes, or veneered panels. Construction styles include face-frame (traditional) and frameless/European full-access systems. Joinery methods often use dadoes, dowels, pocket screws, glue, and mechanical fasteners; quality hardware typically includes soft-close hinges and full-extension drawer slides. Finishes range from paint and stain to lacquer or vinyl/thermofoil wraps. In Denver’s arid climate, stable, well-sealed materials and solid assembly help reduce warping and finish stress from humidity swings. Buyers often prefer plywood boxes for strength and moisture resistance, while MDF remains common for painted doors when properly finished and sealed.
text
What buyers should evaluate
Review box material and construction quality, door and drawer build (solid or properly veneered versus hollow), hardware brand and operation, finish durability, and whether reveals, gaps, and alignments are consistent after install. Check that units are set plumb, level, and square; that fillers and scribes are planned for walls that are not perfectly straight; and that moisture-prone areas are detailed carefully. Ask for a written scope that lists inclusions and exclusions, appliance clearances, hardware selections, finish samples, lead times, and who is responsible for countertops, plumbing reconnects, or electrical finish work if those are separate. Confirm that no structural or utility work is being treated as “cabinets only” when a broader remodel is actually planned.
text
How a cabinetry project usually runs
Most projects start with site measure, layout review, and product selection. After approvals, cabinets are ordered or fabricated, then staged for install once the room is ready. Installation includes setting base and wall units, shimming for level and plumb, securing to structure as appropriate, installing doors and drawers, adjusting hardware, and completing punch-list fit work. If plumbing, electrical, or countertops are part of a larger remodel, those specialty trades are sequenced around cabinet install so sinks, cooktops, lighting, and outlets land correctly. Final walkthrough focuses on alignment, operation, finish condition, and remaining accessories.
FAQ
Common questions
Do I need a permit to replace kitchen or bathroom cabinets in Denver?
For single-family and duplex homes in Denver, like-for-like cabinet replacement or installation generally does not require a building permit when the work does not change structure, plumbing, electrical, HVAC, or the floor plan. If utilities or layout are altered, permits may be required through Denver CPD.
What is included in cabinetry installation?
Typical scope covers layout, supply or fabrication, setting boxes, installing doors and drawers, hardware, and fit adjustments. Countertops, plumbing reconnects, electrical finish, flooring, and painting may be separate depending on the written project scope.
Stock, semi-custom, or custom—what’s the difference?
Stock cabinets use fixed sizes and limited finishes for faster lead times. Semi-custom offers more size, layout, and finish options while still using a manufacturer’s system. Custom casework is built to the room’s exact dimensions and design details. Choice depends on layout constraints, style goals, timeline, and budget priorities.
Which cabinet materials hold up well?
Plywood boxes are widely preferred for strength and moisture resistance. MDF is common for painted doors when sealed well. Solid wood is often used for higher-end visible components. Quality hinges, full-extension slides, and durable finishes matter as much as the core material.
Who handles the cabinetry permits and licensing?
A municipally licensed Denver general contractor coordinates the overall project and any licensed specialty trades needed when work goes beyond cabinet installation. Cabinet-only replacements often need no building permit in Denver, but if plumbing, electrical, structural, or layout changes are involved, those items are routed through the proper permits and qualified trades.
When should cabinets be installed during a remodel?
Cabinets are typically installed after framing, drywall, and mechanical rough-in are complete, and before or in coordination with final countertops, plumbing trim, and finish electrical. Installing too early can lead to damage or rework; installing too late can delay appliances and countertops.
Service Area
Serving Brighton and Adams County
We serve Brighton, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Brighton project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore