DESIGN · BUILD · AUTOMATE
AURORA SERVICES
Cabinetry in Aurora
Licensed cabinetry services for Aurora and Arapahoe/Adams County. Storage that works and looks great.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Storage that works and looks great
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Cabinetry Services in Aurora, Colorado
Autotelic provides professional cabinetry services throughout Aurora and the surrounding Arapahoe/Adams County area. Kitchen, bath, and custom cabinetry from stock to full-custom with hardware, soft-close, and organizational inserts. Whether you're in Aurora (Colorado's third-largest city) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permits & Licensing
Permits in Aurora
Aurora building permits are issued by the Building Division's Permit Center, which also handles public improvement, sign, and lawn and irrigation permits. Contractor licensing is a City of Aurora requirement, and applications go through the Aurora4Biz.org online portal. Authority: City of Aurora — Building Division (Permit Center).
Permit Thresholds
Aurora permit thresholds
- Code reference
- Permits are generally required for residential remodel work in Aurora, Colorado, per the adopted building codes (primarily the 2021 International Residential Code (IRC) with local amendments in Aurora City Code Chapter 22, Article V), unless specifically exempt.
- Aurora City Code § 22-184 (amending IRC R105.2) exempts only
- one-story detached accessory residential storage sheds, playhouses, or shade structures ≤120 sq ft, not attached to the residence, and not used for vehicle storage.§ 22-184
- Code reference
- Aurora City Code § 22-135 (amending IBC 105.2) has similar limited exemptions for certain small accessory structures, fences ≤7 ft high (plus all chain-link fences), and antennae/towers ≤25 ft high.§ 22-135
- Structural triggers
- Any structural alteration, addition, or work affecting load-bearing elements generally requires a permit under the adopted IRC (see R105 and amendments).
- Use tax (construction materials use tax)
- Prior to permit issuance, a deposit is required based on 3.75% (three and three-fourths percent) applied to 50% of the total estimated cost of the building/construction/reconstruction/alteration/expansion/modification/improvement (or 100% of the total estimated cost of construction materials/
- Code reference
- This is per Aurora City Code § 130-61.§ 130-61.
- Code reference
- All information is based on the Aurora Municipal Code (Chapter 22) and official city resources.
Codes are amended regularly — verify current requirements with City of Aurora — Building Division (Permit Center).
Energy Code
Aurora energy code quick facts
- Code reference
- Aurora, Colorado, has adopted the 2021 International Energy Conservation Code (IECC) as its base energy code (with the Colorado Model Electric Ready and Solar Ready Code also required by state law).
- Code reference
- Aurora is in IECC Climate Zone 5B.
- Code reference
- The adopting provision is Aurora City Code § 22-203 (Code adopted, under Article VI, International Energy Conservation Code).§ 22-203
- Code reference
- Key prescriptive requirements relevant to remodels/additions (drawn from 2021 IECC Table R402.1.2 and related sections for CZ 5B; these apply unless a performance path or other compliance option is used):
- Ceiling/attic insulation
- R-49 (2021 IECC Table R402.1.2, CZ 5B).
- Wood-frame wall insulation
- R-20 or 13 + 5ci (continuous insulation) (2021 IECC Table R402.1.2, CZ 5B).
- Floor insulation (over unconditioned space)
- R-30 (2021 IECC Table R402.1.2, CZ 5B).
- Fenestration (windows)
- Maximum U-factor 0.30 and SHGC 0.40 (2021 IECC Table R402.1.2, CZ 5B).
Codes are amended regularly — verify current requirements with City of Aurora — Building Division (Permit Center).
Zoning & Dimensional Standards
Setback & dimensional standards in Aurora
Zone-district dimensional standards for Aurora, quoted verbatim from the Aurora Unified Development Ordinance. Knowing your lot's district — and its setbacks, height, and coverage limits — is where every feasibility conversation starts.
I-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Rear Setback (min) | 5 ft. |
Aurora Unified Development Ordinance I-1 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
I-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Rear Setback (min) | 5 ft. |
Aurora Unified Development Ordinance I-2 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-1setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 6,000 sf. [1] |
| Lot Frontage, Single-Family Detached (min) | Subarea A: 50 ft. Subarea B: 60 ft. |
| Front Setback (min) | 25 ft. [4] |
| Side Interior Setback (min) | 5 ft. [6] |
| Side Setback Abutting Local Street (min) | 12.5 ft. |
| Rear Setback (min) | 20 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-1 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-2setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 6,000 sf. [1] |
| Lot Frontage, Single-Family Detached (min) | Subarea A: 50 ft. Subarea B: 60 ft. |
| Front Setback (min) | 20 ft. [4] |
| Side Interior Setback (min) | 5 ft.[6] |
| Side Setback Abutting Local Street (min) | 10 ft. |
| Rear Setback (min) | 15 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-2 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-3setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 5,000 sf. |
| Lot Frontage, Single-Family Detached (min) | 50 ft. |
| Front Setback (min) | 15 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 10 ft. |
| Rear Setback (min) | 10 ft. |
| Building Height (max) | 45 ft.[7] |
Aurora Unified Development Ordinance R-3 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-4setback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 5,000 sf. |
| Lot Frontage, Single-Family Detached (min) | 50 ft. |
| Front Setback (min) | 12 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 7.5 ft. |
| Rear Setback (min) | 10 ft. |
| Building Height (max) | 65 ft.[8] |
Aurora Unified Development Ordinance R-4 setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-MHsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | [2] |
| Front Setback (min) | 15 ft. |
| Side Interior Setback (min) | 5 ft. |
| Side Setback Abutting Local Street (min) | 15 ft. |
| Rear Setback (min) | 8 ft. |
| Building Height (max) | 20 ft.[9] |
Aurora Unified Development Ordinance R-MH setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
R-Rsetback & dimensional standards
| Standard | Requirement |
|---|---|
| Lot Area, Single-Family Detached (min) | 43,560 sf. |
| Lot Frontage, Single-Family Detached (min) | 120 ft. |
| Front Setback (min) | 30 ft. |
| Side Interior Setback (min) | 10 ft. |
| Side Setback Abutting Local Street (min) | 25 ft. |
| Rear Setback (min) | 25 ft. |
| Building Height (max) | 38 ft. |
Aurora Unified Development Ordinance R-R setback standards (146-4.2.2 Table 4.2-1) — effective 2026-02-23 · View the code
Verify current requirements with the jurisdiction — informational reference only. Standards vary by overlay, lot, and use; we confirm the exact rules for your property during feasibility.
text
What cabinetry work covers
Cabinetry projects in the Denver metro include kitchen and bath cabinets, laundry and garage storage, and custom built-ins. Scope usually covers layout, supply or fabrication, removal of existing boxes when needed, installation, hardware adjustment, and coordination with countertops and appliances. Commercial work may include breakrooms, reception desks, and durable laminate millwork. A municipally licensed Denver general contractor coordinates cabinet packages and the licensed specialty trades required when sinks, dishwashers, or electrical devices move with the layout. Cost is project-specific and depends on linear footage, construction grade, finish, and whether utilities relocate.
text
Measure, lead times, and install sequence
Accurate field measures matter in older Denver homes that are out of square. Stock and semi-custom lines trade speed for fewer size options; custom work fits unusual walls and appliance sizes but needs longer lead times. Install typically follows rough trades and drywall, then counters and backsplash follow cabinet set. Confirm who supplies counters and who cuts sink openings before cabinets are ordered. Soft-close hardware, finished ends, and filler strips should be listed in the written scope.
text
Permits and who coordinates the work
City and County of Denver Community Planning and Development generally treats cabinet-only replacements in the same layout, without plumbing or electrical changes, as finish work that does not need a building permit. Permits become likely when the project relocates plumbing fixtures, adds electrical, or is part of a larger remodel that changes the floor plan or structure. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when utility work is part of the cabinet package.
text
What buyers should lock early
Appliance models, sink type, whether an island is included, finish samples, and handle/pull selections drive box sizes and counter templating. Changing those after order often means delays. For baths, confirm vanity depth, mirror lighting, and plumbing centerlines before boxes are built.
FAQ
Common questions
Do cabinet replacements need a Denver building permit?
Often no when cabinets stay in the same layout and plumbing or electrical systems are not changed. CPD is the building-permit authority inside Denver. Moving a sink or adding circuits usually triggers trade permits.
Who handles cabinetry project permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required for any plumbing or electrical work. Colorado has no statewide general contractor license.
When should counters be templated?
After cabinets are set and leveled. Templating too early risks counters that do not fit final box positions.
Stock, semi-custom, or custom — what changes?
Lead time, size flexibility, and finish options. Stock is fastest; custom fits unusual spaces and appliance sizes. The right choice depends on schedule and layout complexity.
What information helps define an accurate cabinetry scope?
Room photos or measurements, appliance list, whether the sink or utilities move, finish preference, and the city or county for any related permits.
Service Area
Serving Aurora and Arapahoe/Adams County
We serve Aurora, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Aurora project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore