DESIGN · BUILD · AUTOMATE
GREENWOOD VILLAGE SERVICES
Access Control in Greenwood Village
Licensed access control services for Greenwood Village and Arapahoe County. Secure entry management.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Secure entry management
EVERY PROJECT STARTS WITH DESIGN
Local Service
Access Control Services in Greenwood Village, Colorado
Autotelic provides professional access control services throughout Greenwood Village and the surrounding Arapahoe County area. Keypad, fob, biometric, and mobile access control systems for commercial buildings and high-end residential. Whether you're in Greenwood Village (Denver Tech Center) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Greenwood Village permit thresholds
- Code reference
- The city operates under the 2018 International Residential Code (IRC) and other 2018 International Codes, along with the 2023 National Electrical Code (NEC) standards.
- Code reference
- Concrete or asphalt work exceeding 100 square feet
- Code reference
- Re-roofs/Repairs involving the removal of 25% or more of the decking
- Code reference
- Landscaping or grading that is more than 10 feet from a property line, not within a drainage easement, involves less than 500 square feet of disturbed area, and less than 10 cubic yards of earthwork
- Code reference
- Re-roofing that only involves laying new shingles and patching unsound decking (less than 25% of decking removal)
- Snow loads
- 30 lbs.
- Ultimate wind speed
- 120 mph (Basic Design) and nominal: 93 mph (allowable stress design)
- Frost depth
- 36 inches
Codes are amended regularly — verify current requirements with **The City of Greenwood Village (specifically its Community Development Department / Building Division) issues residential building permits.
text
What access control work covers
Access control in the Denver metro typically includes credential readers (card, fob, or mobile), door controllers, electric strikes, electromagnetic locks, electrified locksets, delayed-egress hardware, and telephone or video entry. Reader-to-controller links commonly use Wiegand or OSDP. Lock power is often 12 or 24 VDC; some readers use PoE. A municipally licensed Denver general contractor coordinates the project and licensed specialty trades for the low-voltage and electrical portions. Cost is project-specific and depends on door count, hardware, and integrations.
text
Egress, fire alarm, and voltage limits
Electric locking that limits mechanical free egress is treated as life-safety work. Magnetic locks typically need a fire-alarm release so doors unlock on alarm. Delayed-egress devices have their own listing and inspection path. Denver CPD documents an Access Control System Supervisor certificate for control units, electric door hardware, and interconnect wiring at 48 volts or less, or power-limited as defined by the NEC. That certificate does not cover complete conduit or raceway systems. Circuits above 48 V, including hard-wiring a power supply to building power, are electrical work.
text
Permits and who coordinates the work
City and County of Denver Community Planning and Development issues Access Control Permits for new or altered electric locking and access systems (Denver Commercial Building Code §131.9). Submittals commonly include a one-line diagram and point-to-point wiring, plus fire-alarm or elevator interconnections when those exist. Colorado DORA regulates electrical licensing. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for access-control scopes.
text
What buyers should prepare
Door count and fire ratings, whether existing hardware will be reused, indoor versus outdoor readers, fire-alarm panel location, and any elevator or after-hours requirements.
FAQ
Common questions
Do access control installs need a Denver permit?
Usually yes when electric locking or a new access system is installed or altered. CPD issues an Access Control Permit for that work.
Who handles access control permits and licensing?
A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.
Can maglocks stay locked during a fire alarm?
No. Magnetic locks that hold an egress door typically must release on fire alarm so occupants can exit.
Wiegand or OSDP?
Both are used. OSDP is the newer encrypted reader protocol; Wiegand remains common on existing doors. Match the controller and reader.
What information helps define scope?
Door count, fire ratings, existing hardware photos, fire-alarm interface needs, and city or county.
Service Area
Serving Greenwood Village and Arapahoe County
We serve Greenwood Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Greenwood Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore