(720) 287-7958

DESIGN · BUILD · AUTOMATE

COMMERCE CITY SERVICES

Trim & Millwork in Commerce City

Baseboard Installation (Per Linear Foot), $6.50 each · $99 minimum visit

See all 4 jobs

Licensed trim & millwork services for Commerce City and Adams County. The details that define a space.

What Commerce City requires

Code reference: These rules are in Commerce City Revised Municipal Code Chapter 5 (Buildings and Building Regulations), Article I, particularly Sec. 5-5 (scope of the City of Commerce City Building Code and work exempt from code provisions) and the referenced Sec. 5-8 (work exempt from permit requirements). §5-5

See full local requirements ↓
  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Trim & Millwork

The details that define a space

Jobs you can book online

Pick your job and choose a time.

Pay when you book. We confirm within 24 hours or refund you in full.

  • Baseboard Installation (Per Linear Foot)

    $6.50 each · $5.50 each for 61–150 · $4.75 each for 151+ · $99 minimum visit

    Supply and install primed MDF baseboard up to 4.25 in tall: remove and haul away old base, cut, cope inside corners, nail, fill nail holes, and caulk top edge.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Supply and install primed MDF baseboard up to 4.25 in tall: remove and haul away old base, cut, cope inside corners, nail, fill nail holes, and caulk top edge. The per-linear-foot rate includes standard material. Duration shown is typical for ~100 lf; larger jobs scale (~2 min/lf). Excludes finish painting, stain-grade or hardwood profiles (quote separately), tile/stone base, and floor repairs behind removed base.

  • Crown Molding, Paint-Grade (Per Linear Foot)

    $9.50 each · $8.50 each for 61+ · $99 minimum visit

    Supply and install primed MDF crown molding up to 4.5 in: cut compound miters, cope inside corners, nail to blocking/studs, fill, and caulk both edges.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Supply and install primed MDF crown molding up to 4.5 in: cut compound miters, cope inside corners, nail to blocking/studs, fill, and caulk both edges. Ceilings up to 10 ft. The per-foot rate includes standard paint-grade material. Duration typical for one room (~55 lf). Excludes finish painting, vaulted/angled ceiling transitions, stain-grade wood, and rooms with heavy ceiling texture requiring extra caulk detail (small upcharge quoted on site).

  • Quarter-Round / Shoe Molding (Per Linear Foot)

    $3.25 each · $2.75 each for 81+ · $99 minimum visit

    Supply and install primed quarter-round or shoe molding along existing baseboard: cut, cope, nail, and fill nail holes.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Supply and install primed quarter-round or shoe molding along existing baseboard: cut, cope, nail, and fill nail holes. The per-linear-foot rate includes primed material. Duration typical for ~80 lf. Excludes painting, baseboard replacement (see baseboard SKU), and stain-grade material matching.

  • Window Casing (Per Window)

    $135 each · $115 each for 4+ · $99 minimum visit

    Case one standard window (up to 4x5 ft) in primed MDF: picture-frame or stool-and-apron style, mitered, nailed, filled, and caulked.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Case one standard window (up to 4x5 ft) in primed MDF: picture-frame or stool-and-apron style, mitered, nailed, filled, and caulked. Per-window rate includes standard material. Duration typical for 2 windows; add ~75 min per additional window. Excludes painting, drywall returns repair, stain-grade material, and windows above first-story exterior ladder height on interior stairwells requiring scaffold.

FREE PLANNING TOOLS

Both tools are free and take a couple of minutes — start in either one.

Local Service

Trim & Millwork Services in Commerce City, Colorado

Autotelic provides professional trim & millwork services throughout Commerce City and the surrounding Adams County area. Baseboard, crown molding, door casing, wainscoting, and custom millwork installation with paint or stain finish. Whether you're in Commerce City (northeast Denver metro) or nearby communities, our team delivers quality workmanship, licensed and insured.

The build sequence for a Trim & Millwork project

Every project starts with a feasibility study; this trade is priced from the same assemblies.

  1. Trim & Millwork feasibility in Commerce City
  2. How a Trim & Millwork project is estimated

Start a Trim & Millwork feasibility study

Permit Thresholds

Commerce City permit thresholds

Code reference
Residential roof sheathing replacements of 256 square feet and under (unless required to be fire-retardant).
Code reference
Gutters, kitchen cabinets, on-grade patios, driveways, and certain other minor items (e.g., fences meeting height limits, playground equipment, retaining walls 4 feet and under without surcharge).
Code reference
These rules are in Commerce City Revised Municipal Code Chapter 5 (Buildings and Building Regulations), Article I, particularly Sec. 5-5 (scope of the City of Commerce City Building Code and work exempt from code provisions) and the referenced Sec. 5-8 (work exempt from permit requirements).§5-5
Code reference
The city adopts the 2021 IBC/IRC and related codes with local amendments.
Code reference
Use tax is collected at 4.5% applied to the dollar cost and/or value of all building and construction materials intended to be used and/or consumed as part of the project (not collapsed into a single rate; confirmed for small projects valued at $500 or less, where the permit fee is $23.50 and th

Codes are amended regularly — verify current requirements with **The Building Safety Division (part of the City of Commerce City’s Community Development Department) issues residential building permits.

Energy Code

Commerce City energy code quick facts

Code reference
2021 IECC (as the City of Commerce City Energy Conservation Code), with local amendments.
Code reference
Commerce City adopts the 2021 edition of the International Energy Conservation Code (IECC) as its Energy Conservation Code (both commercial and residential provisions apply, per the city’s Building Code).
Code reference
This is incorporated by reference in the Commerce City Revised Municipal Code (C3BC), primarily via Sec. 5-2 (Incorporation by reference), which lists the 2021 IECC among the adopted codes.§5-2
Code reference
It is further detailed and locally amended on the city’s official page for the 2021 IECC.
Code reference
The city’s amendments (detailed on the official 2021 IECC adoption page) are primarily administrative/procedural and do not alter the core prescriptive tables or performance requirements of the 2021 IECC itself.
Code reference
Amending C101.1 (Title) to reference the City of Commerce City Commercial Energy Conservation Code.
Code reference
Requiring digital submission of construction documents with specific energy-related details (e.g., insulation R-values, fenestration U-factors/SHGC, air barrier details).
Code reference
Deleting/replacing the fees section (C104) to tie into the city’s municipal code Article VI, Chapter 5.

Codes are amended regularly — verify current requirements with **The Building Safety Division (part of the City of Commerce City’s Community Development Department) issues residential building permits.

text

What this covers

Interior millwork: casing, base, crowns, and simple built-ins. Field measure existing openings; shop drawings only when the brief asks.

FAQ

Common questions

How much does Baseboard Installation (Per Linear Foot) cost in Commerce City?

$6.50 each · $5.50 each for 61–150 · $4.75 each for 151+ · $99 minimum visit.

How do I book?

Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.

Who handles the trim & millwork permits and licensing?

A municipally licensed Denver general contractor coordinates licensed specialty trades. Colorado has no statewide general-contractor license; cities and counties license general contractors. DORA licenses electrical and plumbing, not general contractors.

What is typically in scope for trim & millwork in Denver?

Interior millwork: casing, base, crowns, and simple built-ins.

Service Area

Serving Commerce City and Adams County

We serve Commerce City, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Commerce City project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

Free Estimate

Get a free trim & millwork estimate in Commerce City

Tell us about your Commerce City project — we respond fast, and estimates are always free.

Name, phone, and email required.

Verifying you're human…