DESIGN · BUILD · AUTOMATE
CHERRY HILLS VILLAGE SERVICES
Server Rack Build & Cable Management in Cherry Hills Village
Licensed server rack build & cable management services for Cherry Hills Village and Arapahoe County. Clean racks. Organized infrastructure..
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Clean racks. Organized infrastructure.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Server Rack Build & Cable Management Services in Cherry Hills Village, Colorado
Autotelic provides professional server rack build & cable management services throughout Cherry Hills Village and the surrounding Arapahoe County area. Server rack builds across the Denver metro — 2-post and 4-post racks, PDUs, UPS, cable management, patch panels, and clean infrastructure for IT closets. Whether you're in Cherry Hills Village (affluent south Denver) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Cherry Hills Village permit thresholds
- Code reference
- The Village adopted the 2024 International Codes (I-Codes) at the beginning of 2026, including the 2024 International Residential Code (IRC), and adheres to Chapter 18 of the Cherry Hills Village Municipal Code for building regulations.
- Code reference
- If an addition is more than 50% of the existing square footage, or if the aggregate floor area is demolished or reconstructed by more than 50%, or increased by 50% or more, the project is considered "redevelopment" and may have additional submittal and drainage requirements per Chapter 9 of the zoni
- Code reference
- Any electrical work on 400 amps (320 continuous) or greater requires a separate plan review.
- Impervious Surface
- If more than 2,500 square feet of impervious surface is added cumulatively (e.g., house addition, driveway, patio), a Phase III Drainage Plan is required.
- Code Reference
- Cherry Hills Village Municipal Code, Chapter 18, and the adopted 2024 International Residential Code.
- Code reference
- ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes)Section 105.2
- Code reference
- One-story detached, prefabricated storage sheds that do not exceed 120 square feet.
- Code Reference
- Cherry Hills Village Municipal Code, Section 105.2, referencing adopted I-Codes.Section 105.2
Codes are amended regularly — verify current requirements with **The City of Cherry Hills Village (specifically its Building Division under Community Development) issues residential building permits.
overview
overview
This trade is the rack and its power and cable plant, not a managed-IT or cloud-hosting contract. Scope includes 19-inch two-post or four-post racks and enclosed cabinets, vertical and horizontal managers, patch panels, PDUs, UPS placement, rack grounding, and labeled structured cabling landing in the rack. Typical locations are a closet, MDF, IDF, or dedicated equipment room.
permits
permits
City and County of Denver Community Planning and Development issues electrical permits for new circuits serving racks, PDUs, and UPS equipment. CPD commercial plan-review guidance requires electrical review for 10 or more new 20 A single-pole circuits, circuits rated above 20 A, new three-phase circuits, or a new circuit at a voltage other than 120 V or 277 V. Electrical review also verifies fuses, breakers, wiring ratings, and panel loads. Some minor electrical work can use a CPD quick permit. DORA licenses electrical contractors. Cities and counties license general contractors. Colorado has no statewide general contractor license.
code
code
Maintain working clearances in front of electrical equipment and listed firestop at rated penetrations. CPD inspection guidance for electrical rough-in expects wiring supported, splices made up, and covering left off until inspected. Confirm with CPD and Denver Fire if the room is a designated equipment room or if detection or suppression is affected. Do not assume a clean-agent system is required.
methods
methods
Use EIA 19-inch spacing, managers sized to Category 6 or 6A bundle diameter, and separate power and data paths. Bond the rack to the building grounding electrode system per the adopted NEC. Match PDU rating to the circuit. Label both ends and keep slack in managers. Cost is project-specific.
FAQ
Common questions
Who handles the electrical permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades. CPD issues electrical permits for new rack, PDU, and UPS circuits. DORA licenses electrical contractors. Colorado has no statewide general contractor license.
When does a rack circuit need electrical plan review?
CPD commercial guidance requires electrical review for 10 or more new 20 A single-pole circuits, circuits above 20 A, new three-phase, or voltages other than 120 V or 277 V. Smaller work may use a quick permit. Confirm with CPD.
Does an interior closet rack need Landmark review?
Interior closet work that does not change the building envelope typically does not trigger Landmark Preservation. Exterior penetrations or work on a designated structure can.
What should be ready for electrical inspection?
CPD inspection guidance expects wiring supported, splices made up, and covering left off until rough-in is inspected. Have the permit and approved plans on site.
Service Area
Serving Cherry Hills Village and Arapahoe County
We serve Cherry Hills Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Cherry Hills Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore