DESIGN · BUILD · AUTOMATE
GREENWOOD VILLAGE SERVICES
Painting in Greenwood Village
Licensed painting services for Greenwood Village and Arapahoe County. Color and protection in every coat.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Color and protection in every coat
EVERY PROJECT STARTS WITH DESIGN
Local Service
Painting Services in Greenwood Village, Colorado
Autotelic provides professional painting services throughout Greenwood Village and the surrounding Arapahoe County area. Interior and exterior painting with thorough prep, premium paints, and clean detail work on trim, ceilings, and cabinets. Whether you're in Greenwood Village (Denver Tech Center) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Greenwood Village permit thresholds
- Code reference
- The city operates under the 2018 International Residential Code (IRC) and other 2018 International Codes, along with the 2023 National Electrical Code (NEC) standards.
- Code reference
- Concrete or asphalt work exceeding 100 square feet
- Code reference
- Re-roofs/Repairs involving the removal of 25% or more of the decking
- Code reference
- Landscaping or grading that is more than 10 feet from a property line, not within a drainage easement, involves less than 500 square feet of disturbed area, and less than 10 cubic yards of earthwork
- Code reference
- Re-roofing that only involves laying new shingles and patching unsound decking (less than 25% of decking removal)
- Snow loads
- 30 lbs.
- Ultimate wind speed
- 120 mph (Basic Design) and nominal: 93 mph (allowable stress design)
- Frost depth
- 36 inches
Codes are amended regularly — verify current requirements with **The City of Greenwood Village (specifically its Community Development Department / Building Division) issues residential building permits.
Energy Code
Greenwood Village energy code quick facts
- Code reference
- Greenwood Village, Colorado, has adopted the 2018 International Energy Conservation Code (IECC) as its energy code.
- Code reference
- There is no indication of a specific "Greenwood Green Code" or "Energize Denver" equivalent adopted by Greenwood Village; however, Colorado state law requires local jurisdictions to adopt and enforce the 2021 IECC and the Colorado Model Electric Ready and Solar Ready Code upon updating any other bui
- Code reference
- The adopting ordinance for the 2018 IECC is referenced on the Greenwood Village Official Website under "Adopted Codes & Manuals" and "Fee Schedule," stating that the 2018 International Energy Conservation Code is currently in effect.ordinance for
- Code reference
- Given that Greenwood Village operates under the 2018 IECC and is in Climate Zone 5B, the following are key prescriptive requirements for residential construction, generally applicable to remodels and additions when the scope of work includes these elements:
- Code reference
- While specific local amendments to the 2018 IECC would need to be thoroughly reviewed within the Greenwood Village Municipal Code, the general prescriptive requirements for Climate Zone 5B from the 2018 IECC (which Greenwood Village has adopted) are as follows:
- Ceiling Insulation (Attic)
- R-49.
- Code reference
- (IECC 2018, Table R402.1.2)IECC 2018
- Wood Frame Wall Insulation
- R-20 continuous insulation (c.i.) or R-13 + R-5 c.i.
Codes are amended regularly — verify current requirements with **The City of Greenwood Village (specifically its Community Development Department / Building Division) issues residential building permits.
text
What painting work covers in the Denver metro
Painting scopes in the Denver metro include interior walls and ceilings, trim and doors, finish-only cabinet painting, and exterior body and trim coats. Prep is part of the work: cleaning, patching, sanding, priming bare or stained areas, and protecting floors and fixtures. Commercial jobs often use low-odor products and after-hours phasing around occupancy. A municipally licensed Denver general contractor coordinates the overall finish package and the licensed specialty trades required when painting is part of a larger remodel. Discovery items found during prep, such as water damage or failed substrate, should be scoped separately from finish coats.
text
Prep, materials, and Front Range conditions
Durability tracks prep quality more than brand names. Exterior Front Range exposures bring UV, freeze-thaw, and hail that show weak scraping, priming, or caulking. Interior work depends on de-glossing glossy surfaces, sealing stains, and matching primer to drywall, wood, masonry, or metal. Product systems are usually primer plus finish coats suited to the substrate. Spray methods can fit some exteriors or cabinets when masking and overspray control are planned; brush and roll remain common for most interiors.
text
Permits, landmarks, and HOAs
Cosmetic painting that does not alter structure, electrical, plumbing, or mechanical systems is generally treated as finish work that does not need a City and County of Denver building permit through Community Planning and Development. Confirm edge cases when painting is bundled into a larger remodel. Other metro cities and counties are the permit authority for their own addresses. Denver Landmark Preservation reviews exterior work on designated landmarks and historic-district properties when a building or zoning permit is required, and issues a Certificate of Appropriateness when that review applies. Ask Landmark staff before exterior color changes on designated properties. HOA color approval is separate from city permits.
text
Pre-1978 paint disturbance and buyer checks
When paid work disturbs paint in housing or child-occupied facilities built before 1978, the U.S. EPA Renovation, Repair and Painting (RRP) Rule can apply even if no building permit is required. Painting preparation that disturbs coated surfaces is among the covered activities. Buyers should ask how RRP firm certification, renovator assignment, lead-safe work practices, and Renovate Right pamphlet acknowledgment will be handled when the building is pre-1978. Cities and counties license general contractors in Colorado. Colorado has no statewide general contractor license.
FAQ
Common questions
Do I need a Denver building permit just to repaint?
Usually no for cosmetic-only interior or exterior painting that does not change structure or building systems. City and County of Denver Community Planning and Development is the building-permit authority inside Denver. Confirm if the paint work is part of a larger remodel that does need permits.
Who handles painting permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required when other regulated work is included. Building permits, when needed, come from the local city or county. Colorado has no statewide general contractor license.
What changes for homes built before 1978?
Disturbing painted surfaces can trigger the EPA Renovation, Repair and Painting Rule. Ask how firm certification, renovator oversight, containment, and pre-renovation education will be documented for that address.
Do historic districts or HOAs affect exterior paint colors?
They can. Landmark Preservation may review exterior changes on designated landmarks and historic-district properties when permit-triggering work is involved, and staff guidance should be sought before color changes on those properties. Many HOAs require separate exterior color approval.
What should a painting proposal include?
Rooms or elevations, prep level, coat count, product approach, protection plan, schedule or phasing, exclusions such as rot or stucco repair, and how discovery items will be approved. For pre-1978 buildings, include the lead-safe work approach.
Service Area
Serving Greenwood Village and Arapahoe County
We serve Greenwood Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Greenwood Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore