DESIGN · BUILD · AUTOMATE
CHERRY HILLS VILLAGE SERVICES
Flooring in Cherry Hills Village
Licensed flooring services for Cherry Hills Village and Arapahoe County. The foundation of every room.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
The foundation of every room
EVERY PROJECT STARTS WITH DESIGN
Local Service
Flooring Services in Cherry Hills Village, Colorado
Autotelic provides professional flooring services throughout Cherry Hills Village and the surrounding Arapahoe County area. Hardwood, LVP, tile, and carpet installation with subfloor prep, transitions, and trim for a seamless finish. Whether you're in Cherry Hills Village (affluent south Denver) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Cherry Hills Village permit thresholds
- Code reference
- The Village adopted the 2024 International Codes (I-Codes) at the beginning of 2026, including the 2024 International Residential Code (IRC), and adheres to Chapter 18 of the Cherry Hills Village Municipal Code for building regulations.
- Code reference
- If an addition is more than 50% of the existing square footage, or if the aggregate floor area is demolished or reconstructed by more than 50%, or increased by 50% or more, the project is considered "redevelopment" and may have additional submittal and drainage requirements per Chapter 9 of the zoni
- Code reference
- Any electrical work on 400 amps (320 continuous) or greater requires a separate plan review.
- Impervious Surface
- If more than 2,500 square feet of impervious surface is added cumulatively (e.g., house addition, driveway, patio), a Phase III Drainage Plan is required.
- Code Reference
- Cherry Hills Village Municipal Code, Chapter 18, and the adopted 2024 International Residential Code.
- Code reference
- ### Exempt Work (Cherry Hills Village Municipal Code Section 105.2, referencing adopted I-Codes)Section 105.2
- Code reference
- One-story detached, prefabricated storage sheds that do not exceed 120 square feet.
- Code Reference
- Cherry Hills Village Municipal Code, Section 105.2, referencing adopted I-Codes.Section 105.2
Codes are amended regularly — verify current requirements with **The City of Cherry Hills Village (specifically its Building Division under Community Development) issues residential building permits.
Energy Code
Cherry Hills Village energy code quick facts
- Code reference
- Cherry Hills Village, Colorado, has adopted the 2024 International Energy Conservation Code (IECC).
- Code reference
- However, state law requires local jurisdictions to adopt and enforce the 2021 International Energy Conservation Code (IECC) and the Colorado Model Electric Ready and Solar Ready Code when updating any other building code, with amendments not permitted to decrease effectiveness or energy efficiency.
- Code reference
- An ordinance (Ordinance No. 2023, Series 1) also indicates the adoption of the 2021 International Energy Conservation Code.Ordinance No. 2023
- Code reference
- Cherry Hills Village is located in IECC Climate Zone 5B.
- Code reference
- The following are key prescriptive requirements for residential remodels and additions, based on the 2021 IECC for Climate Zone 5B, which serve as minimum standards under the adopted energy code:
- Code reference
- ### Key Prescriptive Requirements for Remodels/Additions (2021 IECC, Climate Zone 5B)
- Requirement
- R-49 minimum, with an R-60 retrofit recommended.
- Code reference
- The 2021 IECC raised the prescriptive ceiling to R-60, with R-49 acceptable only with a raised-heel truss (per IECC R402.2.1).
Codes are amended regularly — verify current requirements with **The City of Cherry Hills Village (specifically its Building Division under Community Development) issues residential building permits.
text
What flooring work covers in the Denver metro
Flooring projects in the Denver metro commonly include hardwood or engineered wood, luxury vinyl plank, tile, carpet, and related transitions and base. Work may be a single-room refresh or a whole-level replacement during a remodel. Commercial spaces often prioritize durability, maintenance, and phased installs around occupancy. A municipally licensed Denver general contractor coordinates the overall flooring package and any licensed specialty trades needed when electrical, plumbing, or structural repairs appear under the old floor. Cost is project-specific and depends on material, area, subfloor condition, and furniture or fixture moves.
text
Subfloor prep and Front Range conditions
Successful installs start with a flat, dry, structurally sound subfloor. Denver-area humidity swings and slab moisture can affect wood and resilient products, so acclimation and moisture checks matter before install. Leveling compounds, underlayments, and plywood patches are common when the existing surface is uneven or damaged. Radiant heat, slab-on-grade construction, and below-grade rooms may limit which products and adhesives are appropriate. The product data sheet and site conditions should drive that choice.
text
Material choices and transitions
Hardwood and engineered wood emphasize appearance and refinishing options. LVP and similar resilient products emphasize water resistance and quicker installs in many kitchens and baths. Tile suits wet areas when the substrate and waterproofing details are correct. Carpet remains common in bedrooms and quiet zones. Transitions between rooms, height changes at tile, and door undercuts should be planned before materials arrive. Baseboards and casework may need removal and reinstall for a clean edge.
text
Permits and who coordinates the work
Simple like-for-like flooring replacement often does not need a building permit. Permits become more likely when the project opens walls, changes structure, adds electrical floor heat, or is part of a larger remodel. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when the flooring package ties into broader remodel work.
FAQ
Common questions
Which flooring holds up best in Denver kitchens and entries?
Water-resistant products such as quality LVP or properly detailed tile are common in wet or high-traffic zones. Wood can work with the right species, finish, and moisture management, but spills and snow melt need more care.
Who handles flooring project permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required when electrical, plumbing, or structural work is part of the scope. Local city or county departments issue permits when the work triggers them. Colorado has no statewide general contractor license.
Do I need to leave the house during flooring install?
Not always. Dust, noise, and adhesive odor vary by product and demolition needs. Phasing room by room is often possible in occupied homes and commercial spaces.
What prep happens before new flooring goes down?
Removal of the old floor when required, moisture and flatness checks, repairs or leveling, underlayment, and planning transitions and door clearances. Furniture and appliance moves should be confirmed before start day.
What information helps define an accurate flooring scope?
Room list and approximate square footage, current floor type, desired material, photos of problem areas, whether this is part of a larger remodel, and the city or county for any related permits.
Service Area
Serving Cherry Hills Village and Arapahoe County
We serve Cherry Hills Village, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Cherry Hills Village project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore