DESIGN · BUILD · AUTOMATE
ERIE SERVICES
Flooring in Erie
Licensed flooring services for Erie and Boulder/Weld County. The foundation of every room.
What Erie requires
Code reference: This adoption was approved by the Erie Town Council via Ordinance No. 12-2026. Ord. No. 12-2026
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
The foundation of every room
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Flooring Services in Erie, Colorado
Autotelic provides professional flooring services throughout Erie and the surrounding Boulder/Weld County area. Hardwood, LVP, tile, and carpet installation with subfloor prep, transitions, and trim for a seamless finish. Whether you're in Erie (fast-growing between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Flooring project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Erie permit thresholds
- Code reference
- The Town of Erie has adopted the 2021 International Residential Code (IRC).
- Code reference
- Roofing (more than 1 square aggregate)
- Code reference
- Retaining walls over 4 feet from the bottom of the trench to the top of the wall
- Code reference
- Detached accessory structures 200 sq. ft. or less (not including patio covers, and provided there is no electrical and/or plumbing work)
- Code reference
- Minor fence repair (3 sections or less)
- Code reference
- Minor roof repairs (1 square or less)
- Code reference
- Decks, platforms, walks, and driveways not more than 30 inches above grade and not over any basement or story below
- Code reference
- Examples of square foot construction costs for valuation (as of January 1, 2026):
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
Energy Code
Erie energy code quick facts
- Code reference
- The Town of Erie, Colorado, has adopted the 2024 International Energy Conservation Code (IECC) with local amendments, effective April 24, 2026.
- Code reference
- This adoption was approved by the Erie Town Council via Ordinance No. 12-2026.Ord. No. 12-2026
- Code reference
- Erie is located in Climate Zone 5B.
- Code reference
- While Erie has adopted the 2024 IECC with local amendments, the specific details of these amendments relevant to prescriptive requirements for remodels and additions were not detailed in the publicly available information.
- Code reference
- Therefore, the following prescriptive requirements are based on the base 2024 IECC for Climate Zone 5B, which Erie adopted, and are subject to any specific local modifications enacted through Ordinance No. 12-2026.Ord. No. 12-2026
- Wall Insulation (Residential)
- The building thermal envelope for walls shall meet requirements specified in Table R402.1.2.
- Code reference
- A common prescriptive option for framed walls in Climate Zone 5B is R-20 continuous insulation, or R-13 cavity insulation plus R-5 continuous insulation (denoted as "13&5").
- Code reference
- The 2024 IECC also offers additional flexibility for wall insulation in Climate Zones 4 and 5 if additional credits are achieved.
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
text
What flooring work covers in the Denver metro
Flooring projects in the Denver metro commonly include hardwood or engineered wood, luxury vinyl plank, tile, carpet, and related transitions and base. Work may be a single-room refresh or a whole-level replacement during a remodel. Commercial spaces often prioritize durability, maintenance, and phased installs around occupancy. A municipally licensed Denver general contractor coordinates the overall flooring package and any licensed specialty trades needed when electrical, plumbing, or structural repairs appear under the old floor. Cost is project-specific and depends on material, area, subfloor condition, and furniture or fixture moves.
text
Subfloor prep and Front Range conditions
Successful installs start with a flat, dry, structurally sound subfloor. Denver-area humidity swings and slab moisture can affect wood and resilient products, so acclimation and moisture checks matter before install. Leveling compounds, underlayments, and plywood patches are common when the existing surface is uneven or damaged. Radiant heat, slab-on-grade construction, and below-grade rooms may limit which products and adhesives are appropriate. The product data sheet and site conditions should drive that choice.
text
Material choices and transitions
Hardwood and engineered wood emphasize appearance and refinishing options. LVP and similar resilient products emphasize water resistance and quicker installs in many kitchens and baths. Tile suits wet areas when the substrate and waterproofing details are correct. Carpet remains common in bedrooms and quiet zones. Transitions between rooms, height changes at tile, and door undercuts should be planned before materials arrive. Baseboards and casework may need removal and reinstall for a clean edge.
text
Permits and who coordinates the work
Simple like-for-like flooring replacement often does not need a building permit. Permits become more likely when the project opens walls, changes structure, adds electrical floor heat, or is part of a larger remodel. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when the flooring package ties into broader remodel work.
FAQ
Common questions
Which flooring holds up best in Denver kitchens and entries?
Water-resistant products such as quality LVP or properly detailed tile are common in wet or high-traffic zones. Wood can work with the right species, finish, and moisture management, but spills and snow melt need more care.
Who handles flooring project permits and licensing?
A municipally licensed Denver general contractor coordinates the project and the licensed specialty trades required when electrical, plumbing, or structural work is part of the scope. Local city or county departments issue permits when the work triggers them. Colorado has no statewide general contractor license.
Do I need to leave the house during flooring install?
Not always. Dust, noise, and adhesive odor vary by product and demolition needs. Phasing room by room is often possible in occupied homes and commercial spaces.
What prep happens before new flooring goes down?
Removal of the old floor when required, moisture and flatness checks, repairs or leveling, underlayment, and planning transitions and door clearances. Furniture and appliance moves should be confirmed before start day.
What information helps define an accurate flooring scope?
Room list and approximate square footage, current floor type, desired material, photos of problem areas, whether this is part of a larger remodel, and the city or county for any related permits.
Service Area
Serving Erie and Boulder/Weld County
We serve Erie, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Erie project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore