(720) 287-7958

DESIGN · BUILD · AUTOMATE

CASTLE ROCK SERVICES

Doors in Castle Rock

Door Hardware & Lockset Replacement, $165

See all 12 jobs

Licensed doors services for Castle Rock and Douglas County. Every entrance, perfected.

What Castle Rock requires

Code reference: Exempt work follows the Town’s adopted amendments to the 2024 International Residential Code (IRC) and International Building Code (IBC), per Ordinance No. 2026-017 (effective around June 30, 2026). Ord. No. 2026-017

See full local requirements ↓
  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Doors

Every entrance, perfected

Jobs you can book online

Pick your job and choose a time.

Pay when you book. We confirm within 24 hours or refund you in full.

Fixed-price jobs

  • Barn Door Kit Installation

    Install one customer-supplied barn door kit (door up to 42 in x 84 in, up to 100 lb): mount header board or blocking into studs, hang rail level, install door, guides, stops, and soft-close if included in kit.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Install one customer-supplied barn door kit (door up to 42 in x 84 in, up to 100 lb): mount header board or blocking into studs, hang rail level, install door, guides, stops, and soft-close if included in kit. Excludes the door/kit material, doors over 100 lb, electrical relocation (switches/outlets behind rail), and header framing inside the wall.

  • Bifold Door Adjust or Replace

    One bifold opening: re-track, replace pivots/guides/snuggers, and align existing doors — or install one customer-supplied replacement bifold set (up to 60 in opening) including track and hardware kit.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    One bifold opening: re-track, replace pivots/guides/snuggers, and align existing doors — or install one customer-supplied replacement bifold set (up to 60 in opening) including track and hardware kit. Excludes the door and kit material, opening resizing, and painting.

  • Door Hardware & Lockset Replacement

    Replace up to three customer-supplied knobs, deadbolts, or smart locks on standard-bore doors, including latch alignment and strike adjustment.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Replace up to three customer-supplied knobs, deadbolts, or smart locks on standard-bore doors, including latch alignment and strike adjustment. Fresh mortising or bore resizing is quoted separately.

  • Exterior Door Weatherstrip and Sweep

    Weather-seal one exterior door: replace kerf-in or nail-on weatherstripping on all three sides, install new door sweep or replace sill gasket, and verify smooth latch and full seal (daylight check).

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Weather-seal one exterior door: replace kerf-in or nail-on weatherstripping on all three sides, install new door sweep or replace sill gasket, and verify smooth latch and full seal (daylight check). Standard materials included. Excludes threshold replacement, door planing (see plane/adjust SKU), storm doors, and rot repair at jamb or sill.

  • Front Door Refinish

    Refinish one wood or fiberglass entry door in place: sand/strip failed finish, condition, apply stain (or exterior enamel) plus exterior-rated topcoats.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Refinish one wood or fiberglass entry door in place: sand/strip failed finish, condition, apply stain (or exterior enamel) plus exterior-rated topcoats. TWO-VISIT job — coats require overnight dry between visits; duration shown is total on-site minutes across visits. Stain/paint and topcoat included. Excludes sidelites and transoms (add-on quoted on site), door removal to a shop, severe UV-rot or veneer failure (replacement recommended instead), and hardware replacement.

  • Garage Door Opener Install (Customer-Supplied)

    Replace an existing opener with a customer-supplied smart unit on a standard sectional door, including rail assembly, safety-eye alignment, and app pairing.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Replace an existing opener with a customer-supplied smart unit on a standard sectional door, including rail assembly, safety-eye alignment, and app pairing. New wiring or spring work is quoted separately.

  • Interior Door Install (Prehung, Per Opening)

    Remove an existing interior door and install a customer-supplied prehung unit in the same rough opening, including shimming, hardware, and casing reinstall.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Remove an existing interior door and install a customer-supplied prehung unit in the same rough opening, including shimming, hardware, and casing reinstall. Out-of-square openings needing reframing are quoted on site.

  • Interior Door Slab Swap

    Replace one interior door slab in an existing square jamb: mortise hinges, bore lockset (if slab is unbored), hang, and adjust for even reveal.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Replace one interior door slab in an existing square jamb: mortise hinges, bore lockset (if slab is unbored), hang, and adjust for even reveal. Customer supplies the slab and hardware. Excludes the slab and lockset material, jamb replacement, out-of-square openings requiring rework (converted to plane/adjust pricing on site), and painting/staining.

  • Pocket Door Roller Repair

    Repair one dragging or derailed pocket door: remove door (including split-jamb/trim removal and reinstall where required), replace rollers, adjust track alignment and guides, and rehang.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Repair one dragging or derailed pocket door: remove door (including split-jamb/trim removal and reinstall where required), replace rollers, adjust track alignment and guides, and rehang. Standard replacement rollers included. Excludes full track replacement requiring wall opening (quoted on site as drywall work), new door slab, and hardware upgrades.

  • Storm Door Installation

    Installation of one customer-supplied storm door (standard 32 in or 36 in) on an existing square entry frame: hinge-rail fitting, closer and wind chain, handle/latch set, sweep adjustment, and removal of an old storm…

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Installation of one customer-supplied storm door (standard 32 in or 36 in) on an existing square entry frame: hinge-rail fitting, closer and wind chain, handle/latch set, sweep adjustment, and removal of an old storm door with haul-away of the door only. Excludes door purchase, entry doors, out-of-square or rotted frames requiring trim/jamb repair (quoted separately), and custom-size openings.

Priced per item

  • Door Planing and Adjustment (Per Door)

    $65 each · $55 each for 4+ · $109 minimum visit

    Fix rubbing/sticking interior doors: plane or belt-sand edges, shim or reset hinges, adjust strike plates, and seal raw planed edges.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    Fix rubbing/sticking interior doors: plane or belt-sand edges, shim or reset hinges, adjust strike plates, and seal raw planed edges. The per-door rate applies to each door serviced. Duration shown is typical for 2-3 doors; add ~35 min per additional door. Excludes slab or jamb replacement, exterior doors with foundation-movement issues, and repainting planed edges.

Visit first, then quoted

  • Door & Window Service Visit

    $109 visit fee — credited toward the work

    We diagnose sticking doors, failed seals, broken hardware, or drafty windows and quote repair or replacement.

    Pay when you book · morning (8–12) or afternoon (12–4)

    What's included

    We diagnose sticking doors, failed seals, broken hardware, or drafty windows and quote repair or replacement. The $109 trip fee is credited toward the job.

FREE PLANNING TOOLS

Both tools are free and take a couple of minutes — start in either one.

Local Service

Doors Services in Castle Rock, Colorado

Autotelic provides professional doors services throughout Castle Rock and the surrounding Douglas County area. Interior and exterior door supply and installation including hardware, casing, and weather-sealing. Whether you're in Castle Rock (Douglas County seat) or nearby communities, our team delivers quality workmanship, licensed and insured.

The build sequence for a Doors project

Every project starts with a feasibility study; this trade is priced from the same assemblies.

  1. Doors feasibility in Castle Rock
  2. How a Doors project is estimated

Start a Doors feasibility study

Permit Thresholds

Castle Rock permit thresholds

Code reference
Exempt work follows the Town’s adopted amendments to the 2024 International Residential Code (IRC) and International Building Code (IBC), per Ordinance No. 2026-017 (effective around June 30, 2026).Ord. No. 2026-017
Code reference
One-story detached accessory non-habitable structures (tool sheds, playhouses, etc.) ≤ 120 sq ft, ≥ 10 ft from the nearest occupiable structure.
Code reference
Fences ≤ 6 ft high (swimming pool barriers of any height are *not* exempt).
Code reference
Shingle repair or replacement not exceeding one square (100 sq ft) of covering per building.
Code reference
The adopted codes (2024 IRC/IBC and related) govern when alterations trigger permitting.
Code reference
See Title 15 of the Castle Rock Municipal Code (and amendments in Ordinance 2026-017) for the full adopted code language on work exempt from permit (primarily amending IRC R105.2 and equivalent IBC sections).Ord. 2026-017
Building use tax
5.2% applied to 50% of the project’s valuation (materials estimated at half the valuation).
Code reference
This comprises the Town’s 4.2% use tax rate + Douglas County’s 1% use tax rate.
Ord. No. 2026-017Source: crgov.com

Codes are amended regularly — verify current requirements with **The Town of Castle Rock Building Division (part of Development Services) issues residential building permits within the town limits.

Energy Code

Castle Rock energy code quick facts

Code reference
2021 International Energy Conservation Code (IECC), with local amendments, as adopted by Ordinance No. 2026-017 (adopted June 2, 2026; effective June 30, 2026), along with the Colorado Model Electric-Ready and Solar-Ready Code.Ord. No. 2026-017
Code reference
This applies to Castle Rock (Douglas County, Climate Zone 5B).
Code reference
The adoption aligns with state requirements for jurisdictions updating other building codes by the June 30, 2026 deadline.
Code reference
Specific local numeric amendments to prescriptive requirements (e.g., R-values, U-factors, or air-sealing thresholds for remodels/additions) are not detailed in publicly available sources beyond references to the base 2021 IECC tables/sections (such as Table R402.1.2 for insulation/fenestration and
Code reference
The adopting ordinance incorporates the 2021 IECC by reference with amendments thereto but does not appear to alter the core prescriptive values in available excerpts.
Ord. No. 2026-017Source: crgov.com

Codes are amended regularly — verify current requirements with **The Town of Castle Rock Building Division (part of Development Services) issues residential building permits within the town limits.

text

What door projects cover

Door projects in the Denver metro include replacing interior or exterior doors, upgrading hardware, and sometimes creating or resizing openings. Exterior work adds weatherstripping, thresholds, and flashing details. A municipally licensed Denver general contractor coordinates door packages and related framing trades when openings change. Cost is project-specific and depends on door type, count, and whether rough openings change.

text

Fit and performance

Swing clearance, stack height, and flooring transitions affect fit. Exterior doors should address weather and security needs for Front Range exposure.

text

What buyers should prepare

Door count, interior vs exterior, swing direction, and whether openings will change.

FAQ

Common questions

How much does Door Hardware & Lockset Replacement cost in Castle Rock?

$165.

How do I book?

Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.

Who handles door permits and licensing?

A municipally licensed Denver general contractor coordinates the project and related specialty trades. Colorado has no statewide general contractor license.

Can exterior doors be replaced on a historic home?

Possibly, but Landmark rules may apply on designated properties. Check before ordering.

What about fire-rated doors?

Certain locations require rated doors and hardware. Confirm use and wall type on site.

What information helps define scope?

Door locations, interior vs exterior, opening changes, photos, and city or county.

Service Area

Serving Castle Rock and Douglas County

We serve Castle Rock, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Castle Rock project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

Free Estimate

Get a free doors estimate in Castle Rock

Tell us about your Castle Rock project — we respond fast, and estimates are always free.

Name, phone, and email required.

Verifying you're human…