autotelic.build(720) 287-7958

DESIGN · BUILD · AUTOMATE

LOUISVILLE SERVICES

Concrete Flatwork in Louisville

Licensed concrete flatwork services for Louisville and Boulder County. Driveways. Patios. Walkways. Done right..

What Louisville requires

Code/municipal code sections: Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025). Ord. 2025-1907

See full local requirements ↓
  • Full Design Lifecycle
  • Construction & Tenant Finish
  • Smart Home · A/V · Edge Compute
Concrete Flatwork

Driveways. Patios. Walkways. Done right.

FREE PLANNING TOOLS

Both tools are free and take a couple of minutes — start in either one.

Local Service

Concrete Flatwork Services in Louisville, Colorado

Autotelic provides professional concrete flatwork services throughout Louisville and the surrounding Boulder County area. Concrete flatwork across the Denver metro — patios, driveways, walkways, and garage floors with stamped, broom, and exposed aggregate finishes. Whether you're in Louisville (between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.

Permit Thresholds

Louisville permit thresholds

Code/municipal code sections
Louisville Municipal Code Chapter 15 (Buildings and Construction), which incorporates the 2024 ICC codes (IBC, IRC, IECC, IEBC, etc., effective December 6, 2025) with local amendments via Ordinance 2025-1907 (No. 1907-2025).Ord. 2025-1907
Building permit fee follows a progressive table (e.g., $0–$500
$28; higher brackets up to $1M+ with per-$1,000 increments; exact amounts per the published schedule).
Plan review (in-house)
65% of the building fee.
Boulder County Use Tax
1.185% of 50% of Total Valuation.
City of Louisville Use Tax
3.775% of 50% of Total Valuation.
Code reference
Impact fees may apply for additions or remodels increasing finished floor area over 500 sq ft (per category tables; first 500 sq ft often exempt).

Codes are amended regularly — verify current requirements with **The City of Louisville, Colorado’s Building Safety Division (part of the city government) issues residential building permits.

Energy Code

Louisville energy code quick facts

Code reference
2024 International Energy Conservation Code (IECC), effective December 6, 2025 (adopted via the City of Louisville’s 2024 ICC Code Adoption ordinance), along with the Colorado Model Electric Ready and Solar Ready Code (also effective 12/6/25).
Code reference
Louisville is in Climate Zone 5B.
Code reference
The 2024 IECC (with the model ready codes) applies to new construction and, via Chapter 5 [RE], to additions, alterations, and remodels involving the building thermal envelope.
Code reference
Key prescriptive requirements relevant to remodels/additions (drawn from 2024 IECC Table R402.1.2 and related sections for CZ 5 / 5B; additions must meet these for new envelope areas or the whole-building UA alternative):
Ceiling/attic insulation
Maximum assembly U-factor 0.026 (2024 IECC Table R402.1.2).
Wood-frame wall insulation
Maximum assembly U-factor 0.045 (or equivalent prescriptive R-value combinations such as R-20 + R-5ci or R-13 + R-10ci; note R408 tradeoffs may allow reduced wall performance with additional measures) (2024 IECC Table R402.1.2 and R408).
Vertical fenestration (windows/doors)
Maximum U-factor 0.28 (2024 IECC Table R402.1.2).
Skylights
Maximum U-factor 0.50 (2024 IECC Table R402.1.2).

Codes are amended regularly — verify current requirements with **The City of Louisville, Colorado’s Building Safety Division (part of the city government) issues residential building permits.

text

What concrete flatwork covers

Flatwork in the Denver metro includes patios, private driveways, walkways, and slabs on the lot, plus public sidewalks, curb ramps, and driveway aprons in the right-of-way. Those two locations use different permit paths. A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Cost is project-specific and depends on area, thickness, and whether the pour sits in the public way.

text

Private lot versus public sidewalk

Reconstruction of a City sidewalk requires a permit before work begins (Denver Municipal Code Sec. 49). Denver DOTI Right-of-Way Services regulates curbs, gutters, sidewalks, driveways, and other ROW improvements, including driveway aprons. Private patios and drives are typically a zoning and drainage question: site plans often dimension patio and drive coverage, and parking surfaces must meet neighborhood-inspection rules. Grading changes can trigger SUDP review.

text

Permits and who coordinates the work

DOTI handles ROW concrete and street occupancy. City and County of Denver Community Planning and Development handles zoning and building on private property. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades for flatwork scopes.

text

What buyers should prepare

Whether the pour is on the lot or in the sidewalk/apron, drainage direction, and photos of the existing curb cut.

FAQ

Common questions

Does a patio need a Denver permit?

Often a zoning review when coverage or setbacks change. A public sidewalk or apron needs a DOTI ROW permit before work starts.

Who handles flatwork permits and licensing?

A municipally licensed Denver general contractor coordinates the project and licensed specialty trades. Colorado has no statewide general contractor license.

Is the driveway apron the same as the driveway?

No. The apron is the portion in the public right-of-way next to the street. That piece follows DOTI rules, not just private-lot zoning.

Can I park on dirt?

Neighborhood inspections do not allow parking on dirt. Allowed surfaces depend on dwelling type (gravel, road base, asphalt, or concrete).

What information helps define scope?

Lot vs ROW, square footage, drainage photos, and city or county.

Service Area

Serving Louisville and Boulder County

We serve Louisville, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Louisville project.

How It Runs

01

Survey

02

Design

03

Build

04

Verify

DESIGN SERVICES

CONSTRUCTION

TECHNOLOGY

TRUSTED TO BUILD FOR

  • Punch Bowl SocialFirst four locations
  • Spectrum RetirementSenior living communities
  • Denver HighlandsFirst modular custom home

Free Estimate

Get a free concrete flatwork estimate in Louisville

Tell us about your Louisville project — we respond fast, and estimates are always free.

Name, phone, and email required.

Verifying you're human…