DESIGN · BUILD · AUTOMATE
ERIE SERVICES
Gutters in Erie
Licensed gutters services for Erie and Boulder/Weld County. Protect your investment from water damage.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Protect your investment from water damage
EVERY PROJECT STARTS WITH DESIGN
Local Service
Gutters Services in Erie, Colorado
Autotelic provides professional gutters services throughout Erie and the surrounding Boulder/Weld County area. Seamless gutter installation, downspouts, gutter guards, and drainage solutions for residential and commercial buildings. Whether you're in Erie (fast-growing between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Erie permit thresholds
- Code reference
- The Town of Erie has adopted the 2021 International Residential Code (IRC).
- Code reference
- Roofing (more than 1 square aggregate)
- Code reference
- Retaining walls over 4 feet from the bottom of the trench to the top of the wall
- Code reference
- Detached accessory structures 200 sq. ft. or less (not including patio covers, and provided there is no electrical and/or plumbing work)
- Code reference
- Minor fence repair (3 sections or less)
- Code reference
- Minor roof repairs (1 square or less)
- Code reference
- Decks, platforms, walks, and driveways not more than 30 inches above grade and not over any basement or story below
- Code reference
- Examples of square foot construction costs for valuation (as of January 1, 2026):
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
Energy Code
Erie energy code quick facts
- Code reference
- The Town of Erie, Colorado, has adopted the 2024 International Energy Conservation Code (IECC) with local amendments, effective April 24, 2026.
- Code reference
- This adoption was approved by the Erie Town Council via Ordinance No. 12-2026.Ordinance No. 12-2026
- Code reference
- Erie is located in Climate Zone 5B.
- Code reference
- While Erie has adopted the 2024 IECC with local amendments, the specific details of these amendments relevant to prescriptive requirements for remodels and additions were not detailed in the publicly available information.
- Code reference
- Therefore, the following prescriptive requirements are based on the base 2024 IECC for Climate Zone 5B, which Erie adopted, and are subject to any specific local modifications enacted through Ordinance No. 12-2026.Ordinance No. 12-2026
- Wall Insulation (Residential)
- The building thermal envelope for walls shall meet requirements specified in Table R402.1.2.
- Code reference
- A common prescriptive option for framed walls in Climate Zone 5B is R-20 continuous insulation, or R-13 cavity insulation plus R-5 continuous insulation (denoted as "13&5").
- Code reference
- The 2024 IECC also offers additional flexibility for wall insulation in Climate Zones 4 and 5 if additional credits are achieved.
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
text
What gutter projects cover
Gutter work in the Denver metro includes replacing or installing gutters and downspouts, adding outlets and extensions, and optional leaf-protection systems. Proper sizing and outlet placement move roof water away from foundations during Front Range storms. A municipally licensed Denver general contractor coordinates gutter packages and related fascia or drainage repairs discovered during removal. Cost is project-specific and depends on linear footage, stories, material, and fascia condition.
text
Drainage details that matter
Downspouts should discharge far enough from the foundation to avoid pooling against basement walls. Splash blocks, extensions, or underground drains may be needed depending on grade. Clogged or undersized gutters overflow onto siding and entries.
text
Permits and who coordinates the work
Gutter-only replacement is generally treated as exterior maintenance that does not need a City and County of Denver building permit. Fascia or structural repairs and work on designated landmarks may change that path—confirm when those conditions apply. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when broader exterior work is included.
text
What buyers should check
Existing overflow stains, fascia rot, downspout discharge points, and whether underground drains are desired. Multi-story access affects install method and protection needs.
FAQ
Common questions
Do new gutters need a Denver building permit?
Usually no for gutter-only replacement. Confirm with CPD if fascia/structural repairs or landmark rules apply.
Who handles gutter project licensing?
A municipally licensed Denver general contractor coordinates the work and related specialty trades when needed. Colorado has no statewide general contractor license.
How far should downspouts discharge?
Far enough that water does not pond at the foundation. Exact solutions depend on grade and landscaping.
Are leaf guards worth it in Denver?
They can reduce clogging from trees, but still need periodic checks after hail or heavy storms. They do not replace correct sizing and outlet placement.
What information helps define an accurate gutter scope?
Approximate linear footage or elevation photos, stories, fascia condition, drainage complaints, and the city or county of the property.
Service Area
Serving Erie and Boulder/Weld County
We serve Erie, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Erie project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore