DESIGN · BUILD · AUTOMATE
LITTLETON SERVICES
Drywall in Littleton
Drywall Patch - Medium (12-24 in), $285
See all 7 jobsLicensed drywall services for Littleton and Arapahoe County. Flawless finishes, zero punch lists.
What Littleton requires
Code reference: Standard IRC Section R105.2 exemptions typically apply (e.g., certain minor non-structural repairs, painting, or very small accessory structures), but Littleton provides no separate local valuation threshold below which permits are automatically waived for remodel/alteration work. §R105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Flawless finishes, zero punch lists
Jobs you can book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Fixed-price jobs
Ceiling Drywall Patch with Texture Match
Repair one ceiling drywall opening up to 24x24 in (typical leak cut-out): backing, hang, tape, mud, and spray/hand texture match (knockdown, orange peel, or stomp).
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Repair one ceiling drywall opening up to 24x24 in (typical leak cut-out): backing, hang, tape, mud, and spray/hand texture match (knockdown, orange peel, or stomp). TWO-VISIT job for mud dry time; duration is total on-site minutes across both visits. Ceiling height up to 10 ft. Excludes leak-source repair, painting, popcorn ceilings containing asbestos (test required for pre-1990 homes), and structural framing.
Drywall Patch - Large (24-48 in)
Repair one drywall opening 24-48 in across (e.g., plumbing access cut, door-knob-to-stud damage): frame backing, hang new board, tape, mud, and texture match.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Repair one drywall opening 24-48 in across (e.g., plumbing access cut, door-knob-to-stud damage): frame backing, hang new board, tape, mud, and texture match. TWO-VISIT job (hang/coat day 1, sand/texture day 2); duration is total on-site minutes across both visits. Excludes painting, insulation replacement beyond patch area, ceiling patches (see ceiling patch SKU), and moisture/mold remediation.
Drywall Patch - Medium (12-24 in)
Repair one drywall hole 12-24 in across: cut back to sound board, install backing, hang patch, tape, and apply mud coats with knockdown or orange-peel texture match.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Repair one drywall hole 12-24 in across: cut back to sound board, install backing, hang patch, tape, and apply mud coats with knockdown or orange-peel texture match. TWO-VISIT job (hang/coat day 1, sand/texture day 2 after dry time); duration shown is total on-site time across both visits. Includes one patch per booking. Excludes painting/primer, plumbing or electrical repair behind the wall, and smooth-finish Level 5 walls.
Drywall Patch (Small, Up to 2 Patches)
Repair up to two holes (each under 12 inches) including patch, tape, mud, sand, and texture match, ready for paint.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Repair up to two holes (each under 12 inches) including patch, tape, mud, sand, and texture match, ready for paint. Requires a return trip for final coats; painting is available as an add-on.
Popcorn Ceiling Removal - One Room
Scrape popcorn texture from one room ceiling up to 15x15 ft (225 sq ft cap), full floor/wall masking, skim minor gouges, and apply knockdown or smooth-sand finish.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Scrape popcorn texture from one room ceiling up to 15x15 ft (225 sq ft cap), full floor/wall masking, skim minor gouges, and apply knockdown or smooth-sand finish. TWO-VISIT job (scrape/skim day 1, sand/texture day 2 after dry time); duration is total on-site minutes across both visits. REQUIRES negative asbestos test for homes built before 1990 (customer-provided lab result). Excludes painted-over popcorn (quote separately), asbestos abatement, ceiling paint, and rooms over the size cap.
Skim-Coat One Wall
Skim-coat one wall up to 12 ft wide x 9 ft tall to a smooth Level 4 finish: light scuff/prep, two skim passes, sand, and spot-prime repaired areas.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Skim-coat one wall up to 12 ft wide x 9 ft tall to a smooth Level 4 finish: light scuff/prep, two skim passes, sand, and spot-prime repaired areas. TWO-VISIT job (coats day 1, sand/final day 2 after dry time); duration is total on-site minutes across both visits. Excludes wallpaper removal, full-wall priming and finish paint, texture application, and walls with active moisture damage.
Visit first, then quoted
Drywall Repair Visit
$99 visit fee — credited toward the work
We assess holes, cracks, water damage, or texture mismatch and quote the patch-and-finish work on site.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
We assess holes, cracks, water damage, or texture mismatch and quote the patch-and-finish work on site. The $99 trip fee is applied to the job if you proceed.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Drywall Services in Littleton, Colorado
Autotelic provides professional drywall services throughout Littleton and the surrounding Arapahoe County area. Complete drywall services including hang, tape, mud, and finish with Level 4 and Level 5 options. Whether you're in Littleton (historic downtown Littleton) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Drywall project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permits & Licensing
Permits in Littleton
Littleton building permits are issued by the Community Development Department's Building Division and Permit Center, and a license or registration certificate is required to obtain permits for work within city limits. Applications, plan submittals, and inspection scheduling run through the eTRAKiT online system. Authority: City of Littleton — Community Development Department (Building Division / Permit Center).
Permit Thresholds
Littleton permit thresholds
- Code reference
- Littleton has adopted the 2024 International Residential Code (IRC) and other International Codes (with local amendments) under Littleton City Code Title 4, Building Regulations, Chapter 1.
- Code reference
- Standard IRC Section R105.2 exemptions typically apply (e.g., certain minor non-structural repairs, painting, or very small accessory structures), but Littleton provides no separate local valuation threshold below which permits are automatically waived for remodel/alteration work.§R105.2
- Code reference
- Exempt work lists and structural triggers are governed by the adopted 2024 IRC (with amendments) and Littleton’s submittal policies.
- Code reference
- Minor cosmetic or non-structural work (e.g., painting, flooring replacement without affecting structure) is typically exempt under IRC R105.2.
- Building permit fees follow a tiered schedule based on total valuation (e.g., $1
- $25.85; higher tiers add incremental amounts per $100 or $1,000).
- Code reference
- Plan review fee is 65% of the permit fee(s) when blueprints/construction documents are reviewed.
- Code reference
- Use tax deposit = 0.01969 × total job valuation, calculated as ((total job valuation × 52.5%) × 3.75%).
- Code reference
- Arapahoe County Open Space Tax = 0.00125 × total valuation, calculated as ((total job valuation × 50%) × 0.25%).
Codes are amended regularly — verify current requirements with City of Littleton — Community Development Department (Building Division / Permit Center).
Energy Code
Littleton energy code quick facts
- Code reference
- 2024 IECC (residential and commercial provisions), as adopted by reference with amendments in Littleton City Code Title 4, Chapter 1 (Ordinance 11, Series 2025). The city also adopts the Colorado Model Electric Ready and Solar Ready Code (June 1, 2023 version).Ord. 11
- Code reference
- Prescriptive R-values/U-factors are unchanged from the 2024 I-codes (no local reductions or increases).
- Code reference
- Littleton is in Climate Zone 5B.
- Code reference
- Alterations/additions to the building thermal envelope (new assemblies, modifications, or change-in-use) must generally meet the new-construction prescriptive requirements below; existing assemblies that are exposed but not modified may be insulated to the greatest extent possible without exceeding
- Code reference
- Some exceptions apply (e.g., storm windows, roof recovers) provided energy use is not increased (amended C503.2 / R503.1.1).
- Ceiling/attic insulation
- R-49 (or R-38 over 100% of the area if uncompressed R-38 extends over the wall top plate at eaves; limited reduction to R-30 allowed for certain roof/ceiling designs up to 500 sf or 20% of ceiling area).
- Adopting reference/ordinance
- 2024 IECC Table R402.1.2 / IRC Table N1102.1.2 (as consolidated in city table, note b/c).
- Wood-framed above-grade walls
- R-20ci only, or R-13cav + R-10ci, or R-20cav + R-5ci, or R-30cav only.
Codes are amended regularly — verify current requirements with City of Littleton — Community Development Department (Building Division / Permit Center).
text
What drywall work covers
Drywall projects in the Denver metro include hanging, taping, texturing, and patching walls and ceilings. Moisture-resistant boards are common in baths and laundry areas. A municipally licensed Denver general contractor coordinates drywall with framing and finishing trades. Cost is project-specific and depends on area, texture match, and access.
text
Texture and wet areas
Matching existing texture takes skill and lighting checks. Wet areas need the right board type and coordination with waterproofing trades.
text
Permits and who coordinates the work
Small patches often do not need a City and County of Denver building permit. New walls in a remodel are usually covered under the broader CPD building permit. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when electrical or plumbing rough-in is tied to the walls.
text
What buyers should note
Rooms in scope, texture type, ceiling vs walls, and any moisture staining.
Installed cost
Drywall: typical 800 sq ft basement, installed
- Essential
- $10,500 – $12,000
- Premium
- $10,500 – $12,000
- Luxury
- $10,500 – $12,000
Prices as of September 2026 · Littleton projects are priced on the same Denver-metro estimate.
See materials and what's included →FAQ
Common questions
How much does Ceiling Drywall Patch with Texture Match cost in Littleton?
$475.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Do drywall patches need a Denver permit?
Often no for small patches. New walls in remodels are typically part of a CPD building permit.
Who handles drywall project licensing?
A municipally licensed Denver general contractor coordinates the work and related specialty trades. Colorado has no statewide general contractor license.
Can you match popcorn or orange-peel texture?
Often yes; matching depends on existing texture and lighting. Samples should be reviewed on site.
What board for bathrooms?
Moisture-resistant boards are commonly used in wet rooms, coordinated with the waterproofing plan.
What information helps define scope?
Photos, approximate square footage, texture goals, moisture issues, and city or county.
Service Area
Serving Littleton and Arapahoe County
We serve Littleton, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Littleton project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore