DESIGN · BUILD · AUTOMATE
LAFAYETTE SERVICES
Roofing in Lafayette
Roofing Inspection & Repair Visit, $129 visit fee — credited toward the work
See all 3 jobsLicensed roofing services for Lafayette and Boulder County. Protection from the top down.
What Lafayette requires
Code reference: Exempt work (from building permit requirements, per the City’s website and 2023 Lafayette Colorado Building Code amendments to IRC Section R105.2 / equivalent) includes (non-exhaustive list relevant to remodels): §R105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Protection from the top down
Jobs you can book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Emergency Roof Leak Response
$249 visit fee — credited toward the work
Confirmed within 2 hours or fully refunded.
Priority dispatch for active roof leaks — emergency tarp or temporary seal to stop water intrusion, plus a documented permanent-repair quote.
Pay when you book
What's included
Priority dispatch for active roof leaks — emergency tarp or temporary seal to stop water intrusion, plus a documented permanent-repair quote. The $249 fee is credited toward the repair; steep or unsafe conditions may limit same-visit access.
Roofing Inspection & Repair Visit
$129 visit fee — credited toward the work
Roofer inspects shingles, flashing, penetrations, and hail damage, with photos and a written repair quote.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Roofer inspects shingles, flashing, penetrations, and hail damage, with photos and a written repair quote. The $129 fee applies toward any approved roof work.
Soffit Vent Installation (Per Vent)
$65 each · $55 each for 7+ · $129 minimum visit
Cut in and install aluminum soffit intake vents (4x16 or 8x16): layout between rafter tails, cut soffit, screw vents, verify insulation is not blocking airflow at each location.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Cut in and install aluminum soffit intake vents (4x16 or 8x16): layout between rafter tails, cut soffit, screw vents, verify insulation is not blocking airflow at each location. Vent material included. Single-story eave height up to 12 ft. Duration typical for 4-6 vents. Excludes ridge/roof vents, baffle installation in attic (quoted on site), two-story eaves, and soffit repair/replacement.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Roofing Services in Lafayette, Colorado
Autotelic provides professional roofing services throughout Lafayette and the surrounding Boulder County area. Full roofing services including tear-off, underlayment, shingles, metal, flat roofing, and storm damage repair. Whether you're in Lafayette (east Boulder County) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a Roofing project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permit Thresholds
Lafayette permit thresholds
- Code reference
- This follows the City’s adopted codes (primarily the 2021 International Residential Code with local amendments in the 2023 Lafayette Colorado Building Code, effective August 1, 2023).
- Code reference
- Exempt work (from building permit requirements, per the City’s website and 2023 Lafayette Colorado Building Code amendments to IRC Section R105.2 / equivalent) includes (non-exhaustive list relevant to remodels):§R105.2
- Code reference
- One-story detached accessory storage sheds under 120 sq ft.
- Code reference
- Retaining walls under 3 ft high (measured from bottom of footing to top of wall, unless supporting a surcharge).
- Code reference
- Sidewalks, driveways, and patios less than 30 inches above adjacent grade and not part of an accessible route.
- Code reference
- Window awnings projecting no more than 54 inches from a residence (no additional support required).
- Construction use tax
- Any person obtaining a building permit must pay a use tax deposit of 3.87% on 60% of the value of the permit (per Sec. 110-37 of the Municipal Code).§110-37
Codes are amended regularly — verify current requirements with **City of Lafayette, Colorado Building Division (part of the Planning & Building Department) issues residential building permits within city limits.
Energy Code
Lafayette energy code quick facts
- Code reference
- 2021 IECC (residential and commercial provisions) with local amendments, as adopted in the 2023 Lafayette, Colorado Building Code (effective August 1, 2023).
- Code reference
- This is confirmed on the City’s official Building Code & Design Information page and in the adopted code document (which includes Article 9 amendments to the 2021 IECC).
- Code reference
- The base prescriptive requirements follow the 2021 IECC (Climate Zone 5B for the Lafayette area).
- Code reference
- The City is in the process of considering 2024 I-Codes (including a Metro Cohort Model Code based on the 2024 IECC) but has not yet adopted them.
- Code reference
- Key prescriptive requirements relevant to remodels/additions (drawn from the 2021 IECC as adopted/amended locally; specific numeric values and sections are from the base 2021 IECC unless locally modified in Article 9 of the 2023 Lafayette code—local amendments focus more on electrification/solar
- Wall insulation (wood-frame above-grade)
- R-20 + R-5 ci or R-13 + R-10 ci (2021 IECC Table R402.1.2 / prescriptive path; applies to additions and alterations per R503).
- Ceiling/attic insulation
- R-49 (or higher per table footnotes; 2021 IECC Table R402.1.2; relevant for additions and certain alterations).
- Fenestration (windows/doors)
- Maximum U-factor typically 0.30 (or as specified in Table R402.1.2 for CZ 5; SHGC requirements also apply; relevant for replacement windows in remodels).
Codes are amended regularly — verify current requirements with **City of Lafayette, Colorado Building Division (part of the Planning & Building Department) issues residential building permits within city limits.
content
Roofing Scope in Denver
Roofing projects in Denver commonly include repairs, replacements, and inspections for both residential and commercial properties. Top search queries include roofing companies denver, roofing contractors denver, roof repair denver, and commercial roofing denver.
content
Permits and Codes
Denver requires permits for most roofing work. A municipally licensed Denver general contractor coordinates licensed specialty trades for permit applications and inspections under local building codes.
FAQ
Frequently Asked Questions
How much does Roofing Inspection & Repair Visit cost in Lafayette?
$129 visit fee — credited toward the work.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Who handles the roofing permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades for permits and inspections.
What roofing materials are used in Denver?
Common materials include asphalt shingles, metal panels, and modified bitumen, selected based on project requirements and local conditions.
Service Area
Serving Lafayette and Boulder County
We serve Lafayette, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lafayette project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore