DESIGN · BUILD · AUTOMATE
ERIE SERVICES
Masonry in Erie
Licensed masonry services for Erie and Boulder/Weld County. Timeless brick, block, and stone.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Timeless brick, block, and stone
EVERY PROJECT STARTS WITH DESIGN
Local Service
Masonry Services in Erie, Colorado
Autotelic provides professional masonry services throughout Erie and the surrounding Boulder/Weld County area. Brick veneer, CMU block, stone masonry, and retaining walls for structural and decorative applications. Whether you're in Erie (fast-growing between Denver and Boulder) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Erie permit thresholds
- Code reference
- The Town of Erie has adopted the 2021 International Residential Code (IRC).
- Code reference
- Roofing (more than 1 square aggregate)
- Code reference
- Retaining walls over 4 feet from the bottom of the trench to the top of the wall
- Code reference
- Detached accessory structures 200 sq. ft. or less (not including patio covers, and provided there is no electrical and/or plumbing work)
- Code reference
- Minor fence repair (3 sections or less)
- Code reference
- Minor roof repairs (1 square or less)
- Code reference
- Decks, platforms, walks, and driveways not more than 30 inches above grade and not over any basement or story below
- Code reference
- Examples of square foot construction costs for valuation (as of January 1, 2026):
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
Energy Code
Erie energy code quick facts
- Code reference
- The Town of Erie, Colorado, has adopted the 2024 International Energy Conservation Code (IECC) with local amendments, effective April 24, 2026.
- Code reference
- This adoption was approved by the Erie Town Council via Ordinance No. 12-2026.Ordinance No. 12-2026
- Code reference
- Erie is located in Climate Zone 5B.
- Code reference
- While Erie has adopted the 2024 IECC with local amendments, the specific details of these amendments relevant to prescriptive requirements for remodels and additions were not detailed in the publicly available information.
- Code reference
- Therefore, the following prescriptive requirements are based on the base 2024 IECC for Climate Zone 5B, which Erie adopted, and are subject to any specific local modifications enacted through Ordinance No. 12-2026.Ordinance No. 12-2026
- Wall Insulation (Residential)
- The building thermal envelope for walls shall meet requirements specified in Table R402.1.2.
- Code reference
- A common prescriptive option for framed walls in Climate Zone 5B is R-20 continuous insulation, or R-13 cavity insulation plus R-5 continuous insulation (denoted as "13&5").
- Code reference
- The 2024 IECC also offers additional flexibility for wall insulation in Climate Zones 4 and 5 if additional credits are achieved.
Codes are amended regularly — verify current requirements with **Town of Erie Building Division (Town of Erie, Colorado).
text
What masonry work covers
Masonry projects in the Denver metro include brick and stone repair, repointing, chimney rebuilds or caps, block walls, and new veneer tied to building framing. Outdoor steps, columns, and kitchen bases are common residential add-ons. Commercial work may include veneer repairs on street-facing elevations. A municipally licensed Denver general contractor coordinates masonry packages and related specialty trades when structural ties, flashings, or chimney liners are involved. Cost is project-specific and depends on access, matching materials, and whether work is repair or rebuild.
text
Front Range moisture and freeze-thaw
Freeze-thaw cycles and wind-driven rain stress mortar joints, chimney crowns, and missing weeps. Through-wall flashings and drainage details often matter more than surface appearance. Matching older brick or stone can constrain repair approaches.
text
Permits and who coordinates the work
Structural masonry, many new walls, and chimney work with structural changes typically need building permits through City and County of Denver Community Planning and Development (or the local building department). Landmark Preservation may review exterior masonry on designated landmarks and historic-district properties when permits are required. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when regulated work is part of the package.
text
What buyers should define early
Repair versus rebuild goals, chimney use (decorative vs active flue), known leaks, and whether matching salvage brick is available. Photos of failed joints, spalls, and caps help scope the first visit.
FAQ
Common questions
Do masonry repairs need a Denver building permit?
Minor repointing may not, but structural rebuilds, new walls, and many chimney structural changes typically do. Confirm with CPD before starting.
Who handles masonry permits and licensing?
A municipally licensed Denver general contractor coordinates the project and licensed specialty trades when needed. Colorado has no statewide general contractor license.
Why is my chimney spalling?
Water entering failed crowns or joints, then freeze-thaw, is a common Front Range pattern. Caps, flashings, and liners should be checked together.
Can new brick match my 1920s home?
Sometimes with salvage or careful blending. Exact matches are not always available; review samples on site before large rebuilds.
What information helps define an accurate masonry scope?
Photos of damaged areas, chimney use, landmark/HOA status, and the city or county for permitting.
Service Area
Serving Erie and Boulder/Weld County
We serve Erie, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Erie project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home