DESIGN · BUILD · AUTOMATE
LONGMONT SERVICES
In-Ceiling & In-Wall Speaker Install in Longmont
In-Ceiling / In-Wall Speaker Installation (Per Speaker), $189 each
Licensed in-ceiling & in-wall speaker install services for Longmont and Boulder County. Premium audio. Invisible installation..
What Longmont requires
Code reference: The City of Longmont has adopted the 2024 International Codes, including the International Residential Code, effective July 1, 2026.
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Premium audio. Invisible installation.
Book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
In-Ceiling / In-Wall Speaker Installation (Per Speaker)
$189 each · $169 each for 4–7 · $149 each for 8+ · $129 minimum visit
Cut-in, wiring termination, and mounting of architectural speakers in accessible drywall ceilings or walls, per speaker, including connection to your amplifier.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Cut-in, wiring termination, and mounting of architectural speakers in accessible drywall ceilings or walls, per speaker, including connection to your amplifier. Speaker hardware, long wire runs through inaccessible framing, and amplifier setup are not included.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
In-Ceiling & In-Wall Speaker Install Services in Longmont, Colorado
Autotelic provides professional in-ceiling & in-wall speaker install services throughout Longmont and the surrounding Boulder County area. In-ceiling and in-wall speaker installation across the Denver metro — multi-zone audio with speaker wire, amplifiers, and streaming integration. Whether you're in Longmont (north Boulder County) or nearby communities, our team delivers quality workmanship, licensed and insured.
The build sequence for a In-Ceiling & In-Wall Speaker Install project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
- In-Ceiling & In-Wall Speaker Install feasibility in Longmont
- How a In-Ceiling & In-Wall Speaker Install project is estimated
Start a In-Ceiling & In-Wall Speaker Install feasibility study
Permit Thresholds
Longmont permit thresholds
- Code reference
- The City of Longmont has adopted the 2024 International Codes, including the International Residential Code, effective July 1, 2026.
- Code reference
- Retaining walls over 48 inches.
- Code reference
- Accessory buildings over 120 square feet.
- Code reference
- Accessory buildings 120 square feet or less in floor area, though it is recommended to secure them against wind damage, and they must still meet setback requirements.
- Code reference
- Fencing below certain heights (commonly 6 feet).
- Foundations
- For one-story accessory structures greater than 120 square feet, foundations must be designed by a Colorado-licensed engineer, and the drawings must be stamped and sealed by that engineer.
- Code reference
- The City of Longmont enforces the 2024 International Codes, which became effective on July 1, 2026, along with the Metro Cohort Model Code.
- Code reference
- The Longmont Municipal Code incorporates by reference the International Residential Code for One and Two-Family Dwellings, 2021 Edition, including various appendix chapters.
Codes are amended regularly — verify current requirements with **The City of Longmont Building Services (Building Inspection division) issues residential building permits.
text
What this covers
Speakers in finished or pre-wire ceilings and walls, with backboxes where the assembly needs them. Wire is 16/2 or 14/4 class as specified; DSP or receiver is a related AV item.
text
Technical scope
Speakers in finished or pre-wire ceilings and walls, with backboxes where the assembly needs them. Wire is 16/2 or 14/4 class as specified; DSP or receiver is a related AV item. Cutouts wait until layout is marked against joists, cans, and insulation.
FAQ
Common questions
How much does In-Ceiling / In-Wall Speaker Installation (Per Speaker) cost in Longmont?
$189 each · $169 each for 4–7 · $149 each for 8+ · $129 minimum visit.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
What's not included?
Speaker hardware, long wire runs through inaccessible framing, and amplifier setup are not included.
Who handles the in-ceiling & in-wall speaker install permits and licensing?
A municipally licensed Denver general contractor coordinates licensed specialty trades. Colorado has no statewide general-contractor license; cities and counties license general contractors. DORA licenses electrical and plumbing, not general contractors.
What is typically in scope for in-ceiling & in-wall speaker install in Denver?
Speakers in finished or pre-wire ceilings and walls, with backboxes where the assembly needs them.
Service Area
Serving Longmont and Boulder County
We serve Longmont, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Longmont project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore