DESIGN · BUILD · AUTOMATE
LITTLETON SERVICES
Fencing in Littleton
Gate Rebuild and Rehang, $345
See all 3 jobsLicensed fencing services for Littleton and Arapahoe County. Privacy, security, and style.
What Littleton requires
Code reference: Standard IRC Section R105.2 exemptions typically apply (e.g., certain minor non-structural repairs, painting, or very small accessory structures), but Littleton provides no separate local valuation threshold below which permits are automatically waived for remodel/alteration work. §R105.2
See full local requirements ↓- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Privacy, security, and style
Jobs you can book online
Pick your job and choose a time.
Pay when you book. We confirm within 24 hours or refund you in full.
Fence Picket / Panel Section Replacement
Rebuild one privacy fence section up to 8 ft between existing sound posts: replace rails and cedar pickets (6 ft height), fastened with exterior screws, old material hauled off.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Rebuild one privacy fence section up to 8 ft between existing sound posts: replace rails and cedar pickets (6 ft height), fastened with exterior screws, old material hauled off. Material included. Excludes post setting/replacement (quoted per post on site), gates (see gate SKU), staining, and sections where both adjacent posts are failed.
Fence Repair Visit
$99 visit fee — credited toward the work
On-site assessment of leaning posts, wind-damaged sections, and gates with a firm repair or section-replacement quote.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
On-site assessment of leaning posts, wind-damaged sections, and gates with a firm repair or section-replacement quote. The $99 trip fee is credited toward the job.
Gate Rebuild and Rehang
Rebuild one sagging wood fence gate up to 4 ft wide: new frame with anti-sag hardware or steel gate kit, reuse or replace pickets as needed, new hinges and latch, rehang square and swinging free.
Pay when you book · morning (8–12) or afternoon (12–4)
What's included
Rebuild one sagging wood fence gate up to 4 ft wide: new frame with anti-sag hardware or steel gate kit, reuse or replace pickets as needed, new hinges and latch, rehang square and swinging free. Standard hardware and lumber included. Excludes post replacement or re-setting (quoted on site), double/drive gates, automatic openers, and staining.
FREE PLANNING TOOLS
Both tools are free and take a couple of minutes — start in either one.
EVERY PROJECT STARTS WITH DESIGN
Local Service
Fencing Services in Littleton, Colorado
Autotelic provides professional fencing services throughout Littleton and the surrounding Arapahoe County area. Wood, vinyl, metal, and chain-link fence installation with gates, posts, and permit coordination. Whether you're in Littleton (historic downtown Littleton) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
The build sequence for a Fencing project
Every project starts with a feasibility study; this trade is priced from the same assemblies.
Permits & Licensing
Permits in Littleton
Littleton building permits are issued by the Community Development Department's Building Division and Permit Center, and a license or registration certificate is required to obtain permits for work within city limits. Applications, plan submittals, and inspection scheduling run through the eTRAKiT online system. Authority: City of Littleton — Community Development Department (Building Division / Permit Center).
Permit Thresholds
Littleton permit thresholds
- Code reference
- Littleton has adopted the 2024 International Residential Code (IRC) and other International Codes (with local amendments) under Littleton City Code Title 4, Building Regulations, Chapter 1.
- Code reference
- Standard IRC Section R105.2 exemptions typically apply (e.g., certain minor non-structural repairs, painting, or very small accessory structures), but Littleton provides no separate local valuation threshold below which permits are automatically waived for remodel/alteration work.§R105.2
- Code reference
- Exempt work lists and structural triggers are governed by the adopted 2024 IRC (with amendments) and Littleton’s submittal policies.
- Code reference
- Minor cosmetic or non-structural work (e.g., painting, flooring replacement without affecting structure) is typically exempt under IRC R105.2.
- Building permit fees follow a tiered schedule based on total valuation (e.g., $1
- $25.85; higher tiers add incremental amounts per $100 or $1,000).
- Code reference
- Plan review fee is 65% of the permit fee(s) when blueprints/construction documents are reviewed.
- Code reference
- Use tax deposit = 0.01969 × total job valuation, calculated as ((total job valuation × 52.5%) × 3.75%).
- Code reference
- Arapahoe County Open Space Tax = 0.00125 × total valuation, calculated as ((total job valuation × 50%) × 0.25%).
Codes are amended regularly — verify current requirements with City of Littleton — Community Development Department (Building Division / Permit Center).
Energy Code
Littleton energy code quick facts
- Code reference
- 2024 IECC (residential and commercial provisions), as adopted by reference with amendments in Littleton City Code Title 4, Chapter 1 (Ordinance 11, Series 2025). The city also adopts the Colorado Model Electric Ready and Solar Ready Code (June 1, 2023 version).Ord. 11
- Code reference
- Prescriptive R-values/U-factors are unchanged from the 2024 I-codes (no local reductions or increases).
- Code reference
- Littleton is in Climate Zone 5B.
- Code reference
- Alterations/additions to the building thermal envelope (new assemblies, modifications, or change-in-use) must generally meet the new-construction prescriptive requirements below; existing assemblies that are exposed but not modified may be insulated to the greatest extent possible without exceeding
- Code reference
- Some exceptions apply (e.g., storm windows, roof recovers) provided energy use is not increased (amended C503.2 / R503.1.1).
- Ceiling/attic insulation
- R-49 (or R-38 over 100% of the area if uncompressed R-38 extends over the wall top plate at eaves; limited reduction to R-30 allowed for certain roof/ceiling designs up to 500 sf or 20% of ceiling area).
- Adopting reference/ordinance
- 2024 IECC Table R402.1.2 / IRC Table N1102.1.2 (as consolidated in city table, note b/c).
- Wood-framed above-grade walls
- R-20ci only, or R-13cav + R-10ci, or R-20cav + R-5ci, or R-30cav only.
Codes are amended regularly — verify current requirements with City of Littleton — Community Development Department (Building Division / Permit Center).
text
What fencing projects cover
Fencing in the Denver metro includes privacy and perimeter fences in wood, vinyl, ornamental metal, or chain link, plus gates and hardware. Post setting must account for frost and soil conditions. A municipally licensed Denver general contractor coordinates fence packages and related site work. Cost is project-specific and depends on linear footage, height, material, and grade.
text
Lines, utilities, and grade
Confirm property lines before digging. Utility locates are required before post holes. Sloped lots may need stepped or racked panels.
text
Permits and who coordinates the work
Fence height and placement are often controlled by City and County of Denver zoning rules; taller or street-facing fences may need zoning permits through Development Services. HOA design rules can add separate approvals. Cities and counties license general contractors. Colorado has no statewide general contractor license. Autotelic acts as a municipally licensed Denver general contractor and coordinates licensed specialty trades when electrical gate operators or other regulated work is included.
text
What buyers should prepare
Preferred height and material, gate locations, survey if available, and HOA guidelines.
FAQ
Common questions
How much does Fence Picket / Panel Section Replacement cost in Littleton?
$385.
How do I book?
Press Book next to the job, pick a date and a morning (8–12) or afternoon (12–4) window, and pay in full. We confirm within 24 hours or refund you in full.
Do I need a Denver permit for a new fence?
Often depending on height and location. Check CPD/zoning requirements before install, especially for street-facing or taller fences.
Who handles fencing permits and licensing?
A municipally licensed Denver general contractor coordinates the project and related specialty trades when needed. Colorado has no statewide general contractor license.
Should I have a survey?
A survey or clear line evidence reduces neighbor boundary disputes before digging post holes.
What about gates on a slope?
Gates need level hardware planes; sloping sites may need adjusted posts or custom gate work.
What information helps define scope?
Linear footage, height, material, gate count, grade photos, HOA rules, and city or county.
Service Area
Serving Littleton and Arapahoe County
We serve Littleton, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Littleton project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →Explore
Also serving
Explore