DESIGN · BUILD · AUTOMATE
LAFAYETTE SERVICES
Custom Tile & Stone in Lafayette
Licensed custom tile & stone services for Lafayette and Boulder County. Precision tile for every surface.
- Full Design Lifecycle
- Construction & Tenant Finish
- Smart Home · A/V · Edge Compute
Precision tile for every surface
EVERY PROJECT STARTS WITH DESIGN
Local Service
Custom Tile & Stone Services in Lafayette, Colorado
Autotelic provides professional custom tile & stone services throughout Lafayette and the surrounding Boulder County area. Custom tile and stone installation across the Denver metro — showers, floors, backsplashes, and feature walls with Kerdi waterproofing and precision layouts. Whether you're in Lafayette (east Boulder County) or nearby communities, our team delivers quality workmanship backed by Colorado licensing and full insurance coverage.
Permit Thresholds
Lafayette permit thresholds
- Code reference
- This follows the City’s adopted codes (primarily the 2021 International Residential Code with local amendments in the 2023 Lafayette Colorado Building Code, effective August 1, 2023).
- Code reference
- Exempt work (from building permit requirements, per the City’s website and 2023 Lafayette Colorado Building Code amendments to IRC Section R105.2 / equivalent) includes (non-exhaustive list relevant to remodels):Section R105.2
- Code reference
- One-story detached accessory storage sheds under 120 sq ft.
- Code reference
- Retaining walls under 3 ft high (measured from bottom of footing to top of wall, unless supporting a surcharge).
- Code reference
- Sidewalks, driveways, and patios less than 30 inches above adjacent grade and not part of an accessible route.
- Code reference
- Window awnings projecting no more than 54 inches from a residence (no additional support required).
- Construction use tax
- Any person obtaining a building permit must pay a use tax deposit of 3.87% on 60% of the value of the permit (per Sec. 110-37 of the Municipal Code).Sec. 110-37
Codes are amended regularly — verify current requirements with **City of Lafayette, Colorado Building Division (part of the Planning & Building Department) issues residential building permits within city limits.
Energy Code
Lafayette energy code quick facts
- Code reference
- 2021 IECC (residential and commercial provisions) with local amendments, as adopted in the 2023 Lafayette, Colorado Building Code (effective August 1, 2023).
- Code reference
- This is confirmed on the City’s official Building Code & Design Information page and in the adopted code document (which includes Article 9 amendments to the 2021 IECC).
- Code reference
- The base prescriptive requirements follow the 2021 IECC (Climate Zone 5B for the Lafayette area).
- Code reference
- The City is in the process of considering 2024 I-Codes (including a Metro Cohort Model Code based on the 2024 IECC) but has not yet adopted them.
- Key prescriptive requirements relevant to remodels/additions (drawn from the 202
- Key prescriptive requirements relevant to remodels/additions (drawn from the 2021 IECC as adopted/amended locally; specific numeric values and sections are from the base 2021 IECC unless locally modified in Article 9 of the 2023 Lafayette code—local amendments focus more on electrification/solar
- Wall insulation (wood-frame above-grade)
- R-20 + R-5 ci or R-13 + R-10 ci (2021 IECC Table R402.1.2 / prescriptive path; applies to additions and alterations per R503).
- Ceiling/attic insulation
- R-49 (or higher per table footnotes; 2021 IECC Table R402.1.2; relevant for additions and certain alterations).
- Fenestration (windows/doors)
- Maximum U-factor typically 0.30 (or as specified in Table R402.1.2 for CZ 5; SHGC requirements also apply; relevant for replacement windows in remodels).
Codes are amended regularly — verify current requirements with **City of Lafayette, Colorado Building Division (part of the Planning & Building Department) issues residential building permits within city limits.
text
What custom tile and stone work covers
Custom tile and stone in the Denver metro covers sales coordination, fabrication where needed, and installation across residential and commercial spaces. Common scopes include ceramic, porcelain, and natural stone flooring; accent walls and wainscoting; bathroom floors, tub surrounds, and shower systems with custom pans and waterproofing; kitchen backsplashes, flooring, and stone countertops such as granite, quartz, and quartzite; fireplace surrounds and hearths; and repair or remodel work that replaces failed installations or damaged sections. Exterior stone veneer is sometimes included when the material and detailing suit local climate exposure. Strong projects start with material selection, layout planning, and a clear understanding of wet-area detailing before tile goes down.
text
Materials and methods that hold up in Denver
Typical materials include ceramic and porcelain tile plus natural stone such as granite, marble, slate, quartzite, and fabricated surfaces like quartz. Setting systems matter as much as the face material. Thinset mortar is the standard bond coat for floors, porcelain, ceramic, and cement backer board. Organic mastics may suit some wall applications, with wet-area products reserved for bathrooms and similar exposures. Substrate work often includes cement backer board over wood subfloors, uncoupling membranes to limit crack transfer, leveling compounds for a flat plane, and waterproofing membranes in showers and other wet zones. Grout fills joints; sealers protect grout and many natural stones from moisture and staining. Installation quality depends on sequence: clean and level the substrate, reinforce weak subfloors, check moisture conditions, plan layout from control lines or the room center, dry-lay critical runs, comb adhesive with a notched trowel for coverage, set tile with consistent joints and leveling aids to limit lippage, cut accurately at edges and fixtures, and install movement joints where the assembly needs room to move. Denver’s soil conditions and indoor humidity swings make flatness, substrate stability, and moisture management especially important for long-term performance.
text
Bathrooms, kitchens, and other high-impact areas
Bathrooms are among the most detail-sensitive tile scopes. Shower work may include custom pans, bonded waterproofing systems, correct slopes to drain, and careful transitions at niches, benches, and curbs. Tub surrounds, bathroom floors, and full-height wet walls need continuous moisture control behind the finish, not just attractive tile on the surface. Kitchens commonly involve backsplashes, floor tile, and stone countertop fabrication and installation, with layout choices driven by outlets, windows, appliances, and edge profiles. Living areas and commercial spaces often use larger-format porcelain or stone floors and feature walls, while fireplaces need heat-appropriate materials and clean hearth and surround detailing. In each case, the visible finish only performs as well as the prep, membranes, and movement detailing underneath.
text
Permits, codes, and Denver project conditions
In Denver, building permits and inspections are handled through the Denver Department of Community Planning and Development. Tile and stone finish work by itself is often treated as cosmetic and may not need a permit when it is limited to surface installation without structural change or major system work. Permits are more likely when the project includes structural alterations, plumbing or electrical changes, mechanical work, envelope changes, additions, or broader remodeling that affects life safety or major systems. Online applications commonly run through Denver’s Accela Citizen Access portal, and inspections are scheduled to verify code compliance when a permit is required. Denver enforces adopted International Code Council codes with local amendments, including the 2025 Denver Building and Fire Codes based on the 2024 International code family, energy requirements tied to the IECC, and statewide electrical code adoption. Local conditions that can affect related construction include expansive clay soils, snow load design for roof work, altitude considerations for gas appliances, and energy detailing in Climate Zone 5B/6B. Historic district or landmark exterior work can require Landmark Preservation approval before permitting. Pure finish tile scopes may not trigger all of those issues, but whole-room remodels often do when showers, floors, or adjacent trades open up walls, drains, or structure.
text
How Autotelic approaches tile and stone projects
Autotelic is a municipally licensed Denver general contractor that coordinates custom tile and stone work as part of residential and commercial design-build projects. That means one point of accountability for scope definition, sequencing with related trades, substrate evaluation, and installation standards—rather than leaving homeowners or facility managers to piece together finish work in isolation. Buyers should still judge any tile scope on process: subfloor and moisture evaluation, leveling and membrane strategy, layout control, wet-area waterproofing, joint sizing, stone care requirements, and a written scope that separates prep from finish. Portfolio review, clear communication, and realistic scheduling matter because custom tile is finish-critical and hard to hide if prep is rushed.
text
What buyers should evaluate
Look for experience with your specific application—large-format floors, curbless showers, natural stone, commercial lobbies, or fireplace surrounds are not interchangeable skill sets. Ask how the team evaluates subfloors, moisture, flatness, and movement joints before setting material. Review completed work for consistent grout joints, flat planes, clean cuts, and thoughtful transitions at drains, edges, and dissimilar materials. Confirm who is coordinating permits when plumbing, electrical, or structural work is part of the remodel. Request a detailed scope and timeline that covers demolition, prep, waterproofing, setting, grouting, sealing, and punch-list protection of finished surfaces. Compare proposals on method and completeness, not face-material price alone, because failed waterproofing or an uneven substrate is far more costly than a careful installation path.
FAQ
Common questions
Who handles tile and stone permits and licensing in Denver?
Autotelic is a municipally licensed Denver general contractor and coordinates licensed specialty trades when a project needs them. Many surface-only tile replacements do not require a building permit, but permits and inspections through Denver CPD are typically required when the work alters structure, plumbing, electrical, mechanical systems, the building envelope, or broader life-safety conditions. Trade-specific permits are generally pulled by the appropriate responsible party for that scope.
Do I need a permit to replace floor tile or a backsplash?
Often no, when the work is limited to replacing finishes in place without changing structure or major systems. A permit becomes more likely if the project relocates plumbing, opens walls for electrical or mechanical work, changes the building envelope, or is part of a larger remodel. The exact trigger depends on the full scope and Denver CPD requirements.
Why does substrate prep matter so much for tile in Denver?
Tile and stone are rigid finishes. Uneven subfloors, excess movement, residual moisture, or weak underlayment can telegraph into cracked grout, hollow spots, or broken tile. Denver projects also deal with expansive soils and indoor humidity swings, so leveling, reinforcement, uncoupling membranes, and moisture evaluation are part of a durable assembly—not optional extras.
What waterproofing details matter most in a tiled shower?
A reliable shower depends on continuous waterproofing, correct slope to the drain, compatible membranes or sheet systems, sealed penetrations, and proper transitions at benches, niches, curbs, and walls. The finished tile is only the visible layer; the pan and membrane detailing underneath control whether moisture stays in the wet assembly.
Which materials are commonly used for floors, walls, and counters?
Floors and walls often use ceramic, porcelain, or natural stone. Counters may use granite, quartz, quartzite, or other stone products fabricated to fit the space. Material choice should account for slip resistance, wet-area suitability, maintenance, edge profiles, and the substrate system underneath.
Can tile and stone be part of a larger kitchen or bath remodel?
Yes. Tile and stone are frequently sequenced with framing, plumbing, electrical, waterproofing, carpentry, and countertop work. Coordinating those trades reduces rework at transitions, drain locations, outlet cutouts, and finished elevations.
Service Area
Serving Lafayette and Boulder County
We serve Lafayette, CO and all surrounding Denver metro communities. Our team is based in Denver and operates throughout the Front Range, from Castle Rock to Longmont and everywhere in between. Contact us for a free estimate on your Lafayette project.
How It Runs
01
Survey
02
Design
03
Build
04
Verify
DESIGN SERVICES
Discovery & Site Analysis
Needs + preference programming, site survey, as-built documentation, feasibility.
We walk, measure, and photograph your property — existing conditions, utilities, structure, and constraints. You get the as-built documentation and feasibility read that every later decision rests on.
Learn more →Concept Design & Space Planning
Schematic design, floor plan studies, layout options.
Your scope becomes schematic floor plans you can compare side by side — circulation, daylight, adjacencies, and what each option does to the budget. Layout decisions happen on paper, where changes are cheap.
Learn more →Architectural Design & 3D Renderings
Design development, materials + finishes, photorealistic visualization.
The chosen concept resolves into materials, finishes, fixtures, and lighting — with the automation layer drawn in. Photorealistic renderings let you walk the space and adjust before anything is priced.
Learn more →Construction Documents & Permitting
Full CD sets, structural + MEP engineering coordination, permit-ready drawings.
Approved designs become coordinated architectural, structural, and MEP sheets — the set your jurisdiction permits from and trades build from. We submit, track, and answer review comments.
Learn more →CONSTRUCTION
New Construction & Custom Homes
Ground-up homes and light commercial, dirt to keys.
Ground-up residential and light commercial builds — foundations through finishes, including modular and steel construction. One accountable builder from dirt to keys.
Learn more →Remodels & Additions
Kitchens, baths, basements, pop-tops, whole-home.
Kitchens, baths, basements, pop-tops, and whole-home renovations that respect the house you already have. We handle structure, permits, and the dust.
Learn more →Commercial Tenant Finish & Build-Outs
Shells to working spaces — retail, office, restaurant, school.
Raw shells become working spaces — showrooms, offices, restaurants, schools. Dealer-spec finishes, code compliance, and opening dates held.
Learn more →ADUs & Modular Construction
Backyard cottages, garage conversions, factory-built homes.
Backyard cottages, garage conversions, and factory-built homes — zoning, design, permits, and set. Denver’s ADU rules are a specialty, not a surprise.
Learn more →Outdoor Living & Patio Structures
Decks, pergolas, and dining patios built for Colorado weather.
Decks, pergolas, and dining patios engineered for Colorado sun, snow, and hail — structure, shade, and drainage done right the first time.
Learn more →TECHNOLOGY
Smart Home Automation
Lighting, shades, climate, audio, security — one interface.
Whole-home control of lighting, shades, climate, audio, and security from a single interface — Crestron, Lutron, Savant, and Control4 designed in, not bolted on.
Learn more →A/V Systems
Theaters, distributed audio, video walls, commercial sound.
Theaters, distributed audio, video walls, and commercial sound — designed, installed, and tuned by the same team for over 20 years.
Learn more →Control Systems
Custom programming — scenes and schedules that fit the space.
Every subsystem brought into one elegant interface — custom programming for homes and venues, with scenes and schedules that match how the space is actually used.
Learn more →Networking & Edge Compute
Enterprise Wi-Fi, structured cabling, racks, on-prem compute.
Enterprise-grade Wi-Fi, structured cabling, racks, and on-premise compute — the backbone that makes everything else reliable, including our own Barbot platform.
Learn more →Solar & Energy Storage
Solar arrays, Tesla Powerwall, EV charging — certified install.
Solar arrays, Tesla Powerwall, and EV charging designed and installed by a Tesla Energy Certified team — roof, electrical, and app in one scope.
Learn more →TRUSTED TO BUILD FOR
- Punch Bowl SocialFirst four locations
- Spectrum RetirementSenior living communities
- Denver HighlandsFirst modular custom home
Explore
Also serving
Explore